Jump to content
SAU Community

Recommended Posts

I been thinking of going T67 on NZ manifold and 44mm gate on my 34 too but realized I have to re-route my cross over intake pipe, BOV and all the associated hoses and sensors, what a headfk job..The typical U layout cooler pipes will foul any highmount turbos.. Man would have loved a T67 but too much pain, unless theres better ways..will stick with the TD06 for now

Im doing it, a headfk yes, but worth it. Piping wont be to bad.

I been thinking of going T67 on NZ manifold and 44mm gate on my 34 too but realized I have to re-route my cross over intake pipe, BOV and all the associated hoses and sensors, what a headfk job..The typical U layout cooler pipes will foul any highmount turbos.. Man would have loved a T67 but too much pain, unless theres better ways..will stick with the TD06 for now

Headfk job lol... man hypergear turbos are made for people like you! still a fair bit of mucking around with the TD06..

Do a T67 with a 3" front cover and low mount it.

If you check Roy's for sale thread he has a TD06H-25G that uses a 3" front cover that is normally native to the 20G we get from Kando. Thats a GENUINE TRUST item...........

If trust used the 3" cover on a 25G wheel, it cant honestly be that much worse. Maybe need a psi or 2 extra to reach the same targets. Best of both worlds mate.

I guess roughly the same response if not a TINY bit better and an easy 300kw low mounted (stock mani) on 98.

The T67 and TD06SH-25G both use the 4" cover. The 20G and 18G use the 3" cover in the Trust range

The T67 and TD06SH-25G both use the 4" cover. The 20G and 18G use the 3" cover in the Trust range

When I read ur for sale thread it definitely looked like the SH had a 3" cover, tell me I'm seeing things?!

Right you are, my bad!

I think it was coz it had the knob chopped off that fooled me. Thanks for posting that.

I still think the 3" .60 cover wouldnt be THAT bad for it. It should still work.

ok heres my crappy edit and ideas..

now the problem running t67 on stock manifold is size yeah and the need for a 30mm or bigger spacer..but if we flip it upside down you should have more room to play with and maybe only a 20mm spacer required..but i need to know the length of

A red arrows

B green arrows..

t67final.png

its still not going to be great but its an idea that could work yeah..

Can't you just make a small manifold adapter and move the compressor housing over a bit? You would need a converter from split T3 to the 3 bolt anyway wouldn't you?

You after some more powerz Artz?

So is it the strut tower that fowls the large compressor housing of the T67? 30mm is a huge spacer btw, assuming you need at least that much to clear the engine block/ rocker cover bottom edge..

No. The compressor housing would foul on the exhaust mani, hence the need for such a large spacer. How the hell do you think it could foul on the block/rocker covers lol?

Edited by Hanaldo

no the comp cover hits on the exhaust manifold Ron you need a spacer on most turbos to clear this...

nah Scott I got more than enough powers mate....I just have a bored brain....:/

Anyway T67 on a stock manifold is a crappy idea....whos idea was it anyway... :domokun:

No. The compressor housing would foul on the exhaust mani, hence the need for such a large spacer. How the hell do you think it could foul on the block/rocker covers lol?

Lookin at too many pictures, the non pornographic ones..

My TDO6SL2-20G T3 8cm external gate is getting closer to running. Just fitted the Bosch 1000cc injectors. Still to fit the injector loom plugs, Turbosmart FPR and lines then off to get the pipe work done, then tune.

Has the engine been built? Very clean inside compared to most SR tractor motors.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
×
×
  • Create New...