Jump to content
SAU Community

Recommended Posts

ABS has saved me loads of times on the street esp in the wet.

Really good safety feature when breaking as they dont lock up your brakes which can make your car skid out of control and crash.

Instead of locking up they gradually grab and release the disc brakes.

i said motorkhana not drift.... it can involve lots of hard breaking depending on course layout, not just to get the car sideways

i'm still yet to see how ABS would be a disavantage in a motorkhana. outright braking power will still be the same, and you get the advantage of still being able to steer while braking hard without the fear of locking up. up until the point of having a wheel locking up ABS is the same as non-ABS (you can still modulate the braking to be on the point of locking up and not actually have the ABS engage), but once you do lock up then the ABS is better.

i'm still yet to see how ABS would be a disavantage in a motorkhana. outright braking power will still be the same, and you get the advantage of still being able to steer while braking hard without the fear of locking up. up until the point of having a wheel locking up ABS is the same as non-ABS (you can still modulate the braking to be on the point of locking up and not actually have the ABS engage), but once you do lock up then the ABS is better.

good driver will outbrake ABS.

Of course a good driver will out brake ABS, I've seen it many times myself - but can you say that in every situation?

Unless you are epically well trained, you will jump on the anchors if say, a roo, jumped out in front of ya :)

And even with ABS on, if yuo out-brake it, then sweet. If not, then it's there to lend a hand

If all the conditions are perfect, you're prepared for it and you hit the brakes just strong enough not to lock up then yeah you can beat ABS easy. But as soon as you "slam" on the brakes in a moment of adrenaline, you're f**ked. ABS wins every time in that 'panic' situation because it gives you the option of steering.

I've never seen how ABS can be bad given it waits until a wheel breaks traction before it engages...ABS either kicks in or you're in a slide...

No flatspots on my tyres after DECA...!!!

i have raced both my R31 (no ABS) and my girlfriends R34 (ABS) on the same same and both had the exact same brakes r32 GTR drilled/slotted and R33 4 piston calipers.

there was a noticable difference between the two. The 31 felt like you could break harder before it would lock up a wheel although when it locked up you couldnt turn. The 34 seemed to lockup a little more, but it wasnt as noticable as such because you could still continue 'driving' on turn in.

my experience is for drifting ABS is not going to make a difference at all.

ABS is generally not preferable in a racecar situation, because racecars get into situations not common to road cars, and any decent driver should not need ABS anyway. One easy example is a spin where you want to lock the wheels up, I've head of times when people with ABS equipped cars have lost all braking power because the ABS system was overwhelmed.

There's a reason why the Porsche GT3RS and Noble M600 don't come with ABS.

I cannot do J turns with ABS pluged in in my 33, I may just be crap but my old MR2 (AW11 non ABS) loved them.

And I like the felling of gassing it to the entry of a corner and then mashing the brakes without fear of my crapness flat spoting my $500 tyres which acording to my budget must last 1 year.

ABS is generally not preferable in a racecar situation, because racecars get into situations not common to road cars, and any decent driver should not need ABS anyway. One easy example is a spin where you want to lock the wheels up, I've head of times when people with ABS equipped cars have lost all braking power because the ABS system was overwhelmed.

There's a reason why the Porsche GT3RS and Noble M600 don't come with ABS.

this

Of course a good driver will out brake ABS, I've seen it many times myself - but can you say that in every situation?

Unless you are epically well trained, you will jump on the anchors if say, a roo, jumped out in front of ya :)

And even with ABS on, if yuo out-brake it, then sweet. If not, then it's there to lend a hand

and are epically calm. i've done driver training courses, etc that teach you about brake modulation, etc, but i've had animals and people run out in front of me and i can tell you that all of that goes out the window. you instinctively stomp on the brake pedal as hard as you can, and the closer you get the harder you push the pedal, regardless of whether the wheels are locked up or not. the reasoning your brain isn't consulted in these circumstances. it's all well and good to say about braking distances of a good driver in a non ABS car to an average driver with ABS, but that is in a controlled environment when they know they are going to have to brake suddenly. in an emergency situation that comparison doesn't work.

ABS is generally not preferable in a racecar situation, because racecars get into situations not common to road cars, and any decent driver should not need ABS anyway. One easy example is a spin where you want to lock the wheels up, I've head of times when people with ABS equipped cars have lost all braking power because the ABS system was overwhelmed.

There's a reason why the Porsche GT3RS and Noble M600 don't come with ABS.

porsche carrera cup cars use a version of ABS.

as for the ABS being overwhelmed, a lot of people do the wrong thing when braking with ABS once it has kicked in. you will get people who feel the feedback through the pedal so they start lifting off and reapplying the brakes or pumping the brakes. this is the totally wrong thing to do. you are actually better off just keeping your foot buried into the pedal and letting it sort itself out rather the confusing it by altering brake pressure. also i think you may find that some of the braking failures may have been caused by either boiled brake fluid or the brakes overheating and glazing up, and if you get warped rotors and add that to the mix with ABS then you are in for all sorts of dramas.

Unless you are epically well trained, you will jump on the anchors if say, a roo, jumped out in front of ya :)

yeah but how often does a roo jump out in front of you when your 'drifting or having fun with the car' *thread title*

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...