Jump to content
SAU Community

Recommended Posts

ABS has saved me loads of times on the street esp in the wet.

Really good safety feature when breaking as they dont lock up your brakes which can make your car skid out of control and crash.

Instead of locking up they gradually grab and release the disc brakes.

i said motorkhana not drift.... it can involve lots of hard breaking depending on course layout, not just to get the car sideways

i'm still yet to see how ABS would be a disavantage in a motorkhana. outright braking power will still be the same, and you get the advantage of still being able to steer while braking hard without the fear of locking up. up until the point of having a wheel locking up ABS is the same as non-ABS (you can still modulate the braking to be on the point of locking up and not actually have the ABS engage), but once you do lock up then the ABS is better.

i'm still yet to see how ABS would be a disavantage in a motorkhana. outright braking power will still be the same, and you get the advantage of still being able to steer while braking hard without the fear of locking up. up until the point of having a wheel locking up ABS is the same as non-ABS (you can still modulate the braking to be on the point of locking up and not actually have the ABS engage), but once you do lock up then the ABS is better.

good driver will outbrake ABS.

Of course a good driver will out brake ABS, I've seen it many times myself - but can you say that in every situation?

Unless you are epically well trained, you will jump on the anchors if say, a roo, jumped out in front of ya :)

And even with ABS on, if yuo out-brake it, then sweet. If not, then it's there to lend a hand

If all the conditions are perfect, you're prepared for it and you hit the brakes just strong enough not to lock up then yeah you can beat ABS easy. But as soon as you "slam" on the brakes in a moment of adrenaline, you're f**ked. ABS wins every time in that 'panic' situation because it gives you the option of steering.

I've never seen how ABS can be bad given it waits until a wheel breaks traction before it engages...ABS either kicks in or you're in a slide...

No flatspots on my tyres after DECA...!!!

i have raced both my R31 (no ABS) and my girlfriends R34 (ABS) on the same same and both had the exact same brakes r32 GTR drilled/slotted and R33 4 piston calipers.

there was a noticable difference between the two. The 31 felt like you could break harder before it would lock up a wheel although when it locked up you couldnt turn. The 34 seemed to lockup a little more, but it wasnt as noticable as such because you could still continue 'driving' on turn in.

my experience is for drifting ABS is not going to make a difference at all.

ABS is generally not preferable in a racecar situation, because racecars get into situations not common to road cars, and any decent driver should not need ABS anyway. One easy example is a spin where you want to lock the wheels up, I've head of times when people with ABS equipped cars have lost all braking power because the ABS system was overwhelmed.

There's a reason why the Porsche GT3RS and Noble M600 don't come with ABS.

I cannot do J turns with ABS pluged in in my 33, I may just be crap but my old MR2 (AW11 non ABS) loved them.

And I like the felling of gassing it to the entry of a corner and then mashing the brakes without fear of my crapness flat spoting my $500 tyres which acording to my budget must last 1 year.

ABS is generally not preferable in a racecar situation, because racecars get into situations not common to road cars, and any decent driver should not need ABS anyway. One easy example is a spin where you want to lock the wheels up, I've head of times when people with ABS equipped cars have lost all braking power because the ABS system was overwhelmed.

There's a reason why the Porsche GT3RS and Noble M600 don't come with ABS.

this

Of course a good driver will out brake ABS, I've seen it many times myself - but can you say that in every situation?

Unless you are epically well trained, you will jump on the anchors if say, a roo, jumped out in front of ya :)

And even with ABS on, if yuo out-brake it, then sweet. If not, then it's there to lend a hand

and are epically calm. i've done driver training courses, etc that teach you about brake modulation, etc, but i've had animals and people run out in front of me and i can tell you that all of that goes out the window. you instinctively stomp on the brake pedal as hard as you can, and the closer you get the harder you push the pedal, regardless of whether the wheels are locked up or not. the reasoning your brain isn't consulted in these circumstances. it's all well and good to say about braking distances of a good driver in a non ABS car to an average driver with ABS, but that is in a controlled environment when they know they are going to have to brake suddenly. in an emergency situation that comparison doesn't work.

ABS is generally not preferable in a racecar situation, because racecars get into situations not common to road cars, and any decent driver should not need ABS anyway. One easy example is a spin where you want to lock the wheels up, I've head of times when people with ABS equipped cars have lost all braking power because the ABS system was overwhelmed.

There's a reason why the Porsche GT3RS and Noble M600 don't come with ABS.

porsche carrera cup cars use a version of ABS.

as for the ABS being overwhelmed, a lot of people do the wrong thing when braking with ABS once it has kicked in. you will get people who feel the feedback through the pedal so they start lifting off and reapplying the brakes or pumping the brakes. this is the totally wrong thing to do. you are actually better off just keeping your foot buried into the pedal and letting it sort itself out rather the confusing it by altering brake pressure. also i think you may find that some of the braking failures may have been caused by either boiled brake fluid or the brakes overheating and glazing up, and if you get warped rotors and add that to the mix with ABS then you are in for all sorts of dramas.

Unless you are epically well trained, you will jump on the anchors if say, a roo, jumped out in front of ya :)

yeah but how often does a roo jump out in front of you when your 'drifting or having fun with the car' *thread title*

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This is the territory of the "Stage 1/2/3 Golf GTI/R" or otherwise off the shelf tune with (relative to before) minor mods. It's easier now. Downpipe and Tune and boom, big increases. Stage 1 OEM+ is where it's at. This is where the niche evolved into and it's really easy to see why. It's rare to even NEED to consider changing turbos or going to aftermarket ECU's or building bottom ends for more power. Stage 1-2-3 will get you a LONG WAY. Civic Type R turbo GR Yaris/Corolla Anything with B58 (MKV Supra/x40i) Anything BMW in General Anything Audi in General Any turbo AMG RenaultSport Turbo offerings Korean Elantra N/I30N Ecoboost Mustangs Focus RS? List goes on. I would argue in the future it won't even need to go on... M3P is pretty rapid out of the box...
    • There is a way, but it's not with the same cars. You need to find the same vintage of car, that we had. Realistically, that was an affordable car with aftermarket parts around. So what people need to find is a car that had a decent base in its day, and can be modified. They're looking for a car year make of 2010 to 2015 really... Aus could have done it if Holden didn't fold as V8 commodores were cheap, and if Ford didn't get expensive thanks to COVID, then you could cheaply play with FG Barras. Realistically, those are just a bit heavier, four door skylines. I'm sure the US and UK have similar cars they could find.
    • Haha I do that.. thats when it chirps..The bit point for me is almost non-existent. Otherwise I stall it. But yes, in terms of performance, the clutch is solid af.
    • Greg speaks wisdom. These dirty old Datsuns are only value when they are cheap. When they are not cheap, there is no value. Sounds contradictory, but it's true. We are now 20 years past the hey day of modifying cheap 90s JDM cars for small amounts of money. This is a different world. If you are rich and can afford not to care about what is effectively wasting money on an old Datto shitter, then I have no reason to argue against it. But if you are wanting to experience what we all experienced back in 2005 (and I bought my car last century!) then there is no way to do it.
    • Short answer: No. Medium answer: No, because you still need to conjure the things out of thin air to bolt them to a NA to make it a NA+T. Long Answer: No - The things you need to conjure - meaning a turbo, intercooling, manifolds, exhaust, intake/manifold/piping, clutch, injectors, fuel pump, AFM (?), ECU + Wiring (woo, N/A loom fun) have to come from somewhere. You could have many scavenged these things from an OEM car that someone had upgraded from and use some of these. This will be cost prohibitive now, especially so in the USA. You'd probably pay the same for newer, upgraded components that are better than old OEM stuff from 25-30 years ago. None of these big ticket items are re-usable for the N/A car. Why not buy new and upgrade while you're there? The only real consideration is turbo and fuel sizing and determining whether you want to stay within the bounds of the OEM engine or get into rebuild territory. These limits ARE lower with a N/A motor and especially N/A gearbox at the starting point. And if you're gonna upgrade those then you may as well consider having them built to begin with. Because everyone here knows you're never far from that next engine rebuild once you start making the power you want... The cars you see on the internet and SAU etc have been built over decades. If you're really clued in... you would sell your US car to somebody for what you paid for it. You would then scour AU JDM pages or SAU and buy a car like Dose's on this forum with your powerful American Dollar. This will save you so much money in the long term. Importing it could be tricky. Or it might not because USA. I have long said the only reason 90's Japanese stuff took off was because a) Japanese people had Japanese cars so that is what they used b) Australians could import these cars to Australia with very minimal changes and use them on the road here c) Neither country had well-priced access to US or EU Sports Cars. I don't believe the JDM scene would have taken off in Australia at all if we had EU priced EU BMW M offerings, or more especially the AUS V8 Scene would never have existed if we had the multitude of US cars like Camaros, Mustangs, Corvettes at the prices you folks do. After all - Do the math. I would say put a V8 in your R34 and that's the smart way forward. It is. I did it. I know this from my own experience. But at that point there's no reason to simply not buy a C5 or C6? It would be simpler and easier and cheaper and bette-
×
×
  • Create New...