Jump to content
SAU Community

Recommended Posts

there will be a post lol

maybe ill ebay it. not sure yet!

is it just me or after the shift kit install, the transmission appears to 'slip' less even on take off? im guessing this may assist with fuel economy

Spot on Iain, I'm sure I can feel the same thing.

Dunno about the economy; I'm still not bored with the punch it delivers, maybe next year.

Changed the gearbox yesterday.......but it seems that my timing gremlin has returned!!!!!.... F#<king Car starts and idles but won't rev past 2k without stalling with backfire.

Gearbox did work well for the one drive it worked for.

Edited by Jetwreck

you have to admit it sounds good when it backfires. like a rally car! lol

its probably a wiring issue, the other engine loom is at my place, i rekon we cut off the rear section as it goes to the gearbox, and put the old one on there.

i just had a thought, check the plugs to make sure the pins arent being pushed out of the plus when they are connected.

if we had a working torch we might have seen something that wasnt right

If he keeps buying all the 'awesome' before anyone else gets it, then he can be the gatekeeper! :worship:

Slow down grasshopper. With the option you are looking at, there is absolutely no need nor reason for "awesome"

Slow down grasshopper. With the option you are looking at, there is absolutely no need nor reason for "awesome"

How are things progressing with your FCon Cam? Have you had a tune done or is it just inline running a base map?

Slow down grasshopper. With the option you are looking at, there is absolutely no need nor reason for "awesome"

True, but that isn't going as well as I'd like, so easy solutions are always good. Never mind, I'll be patient!

How are things progressing with your FCon Cam? Have you had a tune done or is it just inline running a base map?

It was running a slightly modified base map, response was impressive but the economy was not so desirable.

Needs a tune, soon... :ph34r:

Edited by iamhe77

It was running a slightly modified base map, response was impressive but the economy was not so desirable.

Needs a tune, soon... :ph34r:

Cool; I'll be interested to see how it goes, you've got all the supporting mods to make the most of it.:thumbsup:

Made plans to start a big couple of weekends this weekend...

Plan is to fit coilovers and possibly brakes before heading to the local brewery for the AFL Grand Final.

Then Sunday/Monday fit brakes if necessary and the HDi Intercooler (assuming it arrives in time).

Haven't even fit everything that's sitting in the shed and I'm already planning the next major project: speakers!

As of the weekend the speakers on the left hand side seem to be shot, with some kind of weird hissing going on. So I've started searching around for some audio info, and there's a surprising amount on the M35 audio here.

Thinking 6.5 splits in the front, 6" 2 ways in the back, 4ch amp and possibly a sub under the rear floor.

I now have SA rego. Not sure if that is a good or a bad thing. Time to figure out how to get a refund from RTA Victoria.

Thinking 6.5 splits in the front, 6" 2 ways in the back, 4ch amp and possibly a sub under the rear floor.

I was thinking you could fit a sub behind the rear left "wall". Don't get me wrong, I know stuff all about this stereo gear, but it would be nice to hide the sub.

I couldn't work out NSW, never bothered.

I was thinking something like this for the sub: http://www.pioneer.com.au/au/products/25/131/201/TS-WX610A/index.html

That way it's all hidden and I still have my boot! :thumbsup:

I couldn't work out NSW, never bothered.

I was thinking something like this for the sub: http://www.pioneer.c...610A/index.html

That way it's all hidden and I still have my boot! :thumbsup:

That's a similar solution to the OEM BOSE sub; not terribly priced either, once you take into account amp is included, and no need to build an enclosure.

That's a similar solution to the OEM BOSE sub; not terribly priced either, once you take into account amp is included, and no need to build an enclosure.

I was really keen on that sort of solution but warned away from them pretty quickly - apparently they provide very little bass. Anyone with the stock Bose unit care to comment?

I was thinking something like this for the sub: http://www.pioneer.c...610A/index.html

That way it's all hidden and I still have my boot! :thumbsup:

i found them to but yeah heard they are pretty shite, i also looked at this

http://www.pioneer.com.au/au/products/25/131/201/TS-WX77A/index.html

but apparently they're not much chop in something as big as a wagon for good sound, alrite in utes and stuff or if not really planning on playing loud/ want good quality

and they are too long to fit across the back of the 60 split rear seat :(

Hmmm, my LOLvo mysteriously just died on the way home from a friend's on Saturday night. Coudln't get a flatbed tow truck on short notice (around 9.15pm on a wet night, so retards who can't drive were having accidents because some water fell from the sky :mad::domokun: ), so I ended up flat-towing it back to my friend's.

Anyway, Sunday come around and my mate goes to check the car - it starts and runs. He organises a towie through a mate, and when the truck gets there it runs again and he dirves it onto the truck. Car arrives at my place, and I then proceed to drive it off the truck and into the garage. Tried it again in the arvo today, and it started and ran again. Weird... :blink: :blink: :mellow:

Tomorrow the old man and I will try and figure out if it will start again, and see if we can source the problem. Regardless, I'm gonna be paranoid to drive it on the cruise on Sunday in case it breaks down a long way from home. :(

i found them to but yeah heard they are pretty shite, i also looked at this

http://www.pioneer.com.au/au/products/25/131/201/TS-WX77A/index.html

but apparently they're not much chop in something as big as a wagon for good sound, alrite in utes and stuff or if not really planning on playing loud/ want good quality

and they are too long to fit across the back of the 60 split rear seat :(

Has anyone pulled up parts 84907 and 84906P before? Click for image.

Think there would be enough room to fit a sub like this under there?

The thread I was looking at yesterday said there was a cross brace in the way, but it could be possible?

Apparently the Bose amps fit under the toolkit, so I'm hoping normal aftermarket ones do too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
×
×
  • Create New...