Jump to content
SAU Community

Recommended Posts

Nope, same as any other VQ. Not sure if anyone in Adelaide stocks them, I ordered mine online. Apparently Autobarn have the Blitz filters with the magnets though.

Craig, this is the tin?

NEO%20RPS10w40.jpg

$98 for 5L from GCCorp.com.au

So I finished fitting the intercooler today. Only thing is I've now got a bit of white smoke. Not sure if it's burning off the excess WD40 I used on the silicon joiners or what, but hopefully it goes away after a bit of a drive.

I had the same thing when I fitted my intake suction pipe (more than a bit of smoke too) which I was convinced was the oil blowing out of the standard intercooler. It only happened after a boost event & only after lifting off. I swapped the factory intake back & the smoke went away, thus proving my point.

Except....

When I put the HDI cooler in last week & reinstalled the suction pipe, there was the smoke again (Dale was still coughing some out of his lungs over lunch last Sunday) under the same conditions. It seems to be getting slightly less the more I drive, but I now think what I am seeing is more to do with oil getting sucked into the plenum from the PCV, not left over oil from the old 'cooler still being in the throttle body/plenum.

I'm getting a catch can for that hose & maybe replacing the PCV valve if excessive oil is captured.

Maybe you could look into the same solution?

Edited by Commsman

One step ahead of you Leon! :thumbsup:

Catch can is sitting in my boot ready to install, hopefully on the weekend. Just need to make up a bracket.

Couldn't believe the amount of blowback when we pulled it apart for a spark plug change.

I had the same thing when I fitted my intake suction pipe (more than a bit of smoke too) which I was convinced was the oil blowing out of the standard intercooler. It only happened after a boost event & only after lifting off. I swapped the factory intake back & the smoke went away, thus proving my point.

Except....

When I put the HDI cooler in last week & reinstalled the suction pipe, there was the smoke again (Dale was still coughing some out of his lungs over lunch last Sunday) under the same conditions. It seems to be getting slightly less the more I drive, but I now think what I am seeing is more to do with oil getting sucked into the plenum from the PCV, not left over oil from the old 'cooler still being in the throttle body/plenum.

I'm getting a catch can for that hose & maybe replacing the PCV valve if excessive oil is captured.

Maybe you could look into the same solution?

Lol, I was sure I could hear you two shouting "Release cloaking device!" before disappearing into a cloud of smoke...

and then reappearing 30 metres further down the road....nyaanyaa.gif

One step ahead of you Leon! :thumbsup:

Catch can is sitting in my boot ready to install, hopefully on the weekend. Just need to make up a bracket.

Couldn't believe the amount of blowback when we pulled it apart for a spark plug change.

Our engines seem a bit sensitive to this for some reason. I'm wondering if our PCV valves are stuffed.

I have a catch can on the other (suction pipe) side & there's not a drop (or even a smear) in the clear plastic hose, let alone the can itself. If the amount of smoke I've been seeing when driven hard is an indication, I may need to empty the PCV one weekly, lol.

Lol, I was sure I could hear you two shouting "Release cloaking device!" before disappearing into a cloud of smoke...

and then reappearing 30 metres further down the road....nyaanyaa.gif

Haha. I was doing my Bond impression. In actual fact, I was trying sooo hard to keep off boost because I knew what would happen if I gave it a little bit.

On the way to/from Sydney I was imagining what people were saying when I passed them, just to cover them in a cloud of white smoke when I lifted off. "Look at the POS wagon...." So embarassing

Haha. I was doing my Bond impression. In actual fact, I was trying sooo hard to keep off boost because I knew what would happen if I gave it a little bit.

On the way to/from Sydney I was imagining what people were saying when I passed them, just to cover them in a cloud of white smoke when I lifted off. "Look at the POS wagon...." So embarassing

laughing-smiley-014.giflaughing-smiley-014.giflaughing-smiley-014.gif

Brief offtopic; you guys had a good run back to the F3 from Wisemans? Good to meet you and your young bloke too.

Brief offtopic; you guys had a good run back to the F3 from Wisemans? Good to meet you and your young bloke too.

Interesting story. It took us 45 minutes from leaving the ferry till we got onto the freeway. Considering it was all 60, 70 & 80 zones (& double demerit weekend), wet & unknown roads (is that enough excuses?), I thought we made good time without taking too many risks. We overtook a Commonwhore who then proceeded to chase us down on the next 2 straights (cornering pace was pretty average) before giving up. However Craig reckons it was too slow but, as Tina says, we don't need another hero, lol.

And it was good to meet you too.

Edited by Commsman

Commonwhore knuckle draggrers hey, when will they learn?

Interesting story. It took us 45 minutes from leaving the ferry till we got onto the freeway. Considering it was all 60, 70 & 80 zones (& double demerit weekend), wet & unknown roads (is that enough excuses?), I thought we made good time without taking too many risks. We overtook a Commonwhore who then proceeded to chase us down on the next 2 straights (cornering pace was pretty average) before giving up. However Craig reckons it was too slow but, as Tina says, we don't need another hero, lol.

And it was good to meet you too.

Had exhaust fitted today. JJR front pipes, catco highflow cat, custom made mandrel bent 3" piping with 'hotdog' style resonator in there somewhere. Oval powerflow performance muffler and twin chrome twin tips to keep stock look. Xforce dump pipes, Denso 720cc injectors, nismo fuel pressure regulator, walbro 255l fuel pump, power fc, greddy profec b 2 boost controller waiting in the shed to be fitted when nismo gt le mans group a turbos get here and aluminium radiator and new silicon hoses on the way (found a crack in top radiator tank) :-(

Nope, same as any other VQ. Not sure if anyone in Adelaide stocks them, I ordered mine online. Apparently Autobarn have the Blitz filters with the magnets though.

Craig, this is the tin?

$98 for 5L from GCCorp.com.au

That'll be the oil Craig is referring to.

Really good stuff :)

That'll be the oil Craig is referring to.

Really good stuff :)

Have you used it yet?

It'd want to be really good stuff considering the buggering around to get some!

Have you used it yet?

It'd want to be really good stuff considering the buggering around to get some!

yes, the 10w40 I have used and preferred the feel of the car to when it had Redline in it if that reference means anything for you.

yes, the 10w40 I have used and preferred the feel of the car to when it had Redline in it if that reference means anything for you.

would you really keep it in your car for 40,000km though?

Bottom end is back together, everything should be bolted up by Monday and nesstled in the engine bay by mid-next week. End next week should have my C34 back!

YaY!

Only thing to be looked at in the future would be sorting out the mirror rust and tidying up some areas of the body, as not much else would be "stock". 6yrs in the making.

However, over the next 4-5yrs, I'll be using the car minimally as I plan to get the train into the city for my up'n'coming Uni studies. I cant forsee myself spending anymore on this stagea. Perhaps the rust/re-paint and perhaps a Z32 Nistune ecu setup, but thats it.

fixed a little gutter rash on one of my wheels, and realised that the outside of the tyre is wearing more than the inside spank.gif

good work on my alignment beaurepairs, guess i'll change the tie-rod ends sooner rather than later then

No, although I am sure it could stand up to 20,000kms of daily highway travel... much like Sougi can/could :ph34r:

fair enough. still worth it at that price.

especially seing as sougi 6000 isnt readily available anymore, and comparing to the price of 300v.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
×
×
  • Create New...