Jump to content
SAU Community

Recommended Posts

Question: what happens when you've replaced pretty much everything you've broken with brand new parts?

Answer: You start breaking the brand new parts just to keep life interesting!

Probably a bit dramatic, but I took the beast for its first proper drive early yesterday morning - holy crap: it's awesome! the thrust is incredible: couldn't be more happy with the 10 min dirive I got in before blowing the intercooler hose off the plenum! It was fantastic!

Of course, being the unprepared moron I am, I didn't have a screwdiver in the car, but we managed to sort the hose issue out by using a 5c coin to turn the screws on the hose clamps, and off I went to my mech for a spanky new blue silicone bend: problem solved!

Disappointment struck when conducyting this running repair in the back hills, as I noticed that my "new" radiator was spitting coolant where a couple of the tubes meet the end tanks...

Now, I'm a reasonable king of guy, and quite patient, but this has really made me start to wear the angry pants again: The last radiator I had was 2 years old when it let go after a mere 1600km of driving, and it wasn't a cheap Chinese Ebay special either: it cost thousands, was a custom order triple cross-flow unit from one of the best in the business (apparently), with a transmission cooler built into one end tank, and an engine oil cooler in the other. My entire cooling suystem has been built around this setup, at great cosyt in both time and money to get everything working how it should.

I have had previous rants about the last failure: the manufacturer tried to claim incorrect coolant was used (it wasn't: we followed their advice to the letter), and it took 6 weeks to get them to agree to provide the new unit at cost price to me as a "sign of good faith". Fair enough: it was outside their 12 month warranty period, so I was happy to take it on the chin. I discovered that the failures I had experienced are well documented, and quite common amongst other clients of this company, as was the attempted warranty-dodging, with many other people coming out of the situation worse off than me...

This time, however, the part is just less than 12 months old, and hasn't even been fitted to the car for more than 3 months of the past 12. Unacceptable!

I dropped the manufacturer a line yesterday to attempt to discuss the issues, and as soon as I mentioned that I had another failure, they tried to pull the "incorrect coolant" card, followed by various other attempts blame the way the car is set up. The fact is, after about $3000 total spend on the 2 units, we tested every single hypothesis they came up with for the prvious failure, in order to not have to go through the whole process again.

I guess the bottom line is that the rad will need to be removed again, and taken to them to inspect, but I'm looking at another couple of months of mothballing the poor old girl again while we get this new issue sorted.

I could conceivably re-engineer the cooling system to take external coolers etc, but the cost will be significant, and I'm stubbornly strong on principle...

Rant. Over.

Watch this space...

A mate of mine had the exact radiator rotting issues with the same brand as yours in a Lexus V8 powered Hilux; he ended up going to Aussie Desert Coolers.

5 years on; using whatever coolant he likes, rad is perfect.

They will build whatever you want; and aside from being a bit brusque over the phone the product speaks for itself.

Got new wheels on the car! just gotta get the new tyres on em now......it's a little tricky because of the profile to get in and out of my garage with the front bar!

On other news Falken have there new tyre out(453's) :banana: ......good news because new better design apparently.....bad news because now there $100 more each! :( I liked it when they were $200 each fitted!

Got Dale's undercar brace bar & the Transgo Shift Kit fitted to my M35 yesterday.. What a HUGE difference in both the way the car handles and the gear changes. Absolutely loving how the car feels thru gear changes.. nice, strong, and quick!! :banana: No more lazzzy gear changes now. Also, cornering feels sooo much better, car is really planted to the ground in fast corners and front end feels 'together' now. Definitely worth every penny IMHO :thumbsup:

Huge thanks to Scott for the quick installation, Dale for manufacturing a great product, and Craig for supplying such a fantastic shift kit.. Great forum, great ppl :D

Thanks guys!!

Cheers,

Chris.

Got new wheels on the car! just gotta get the new tyres on em now......it's a little tricky because of the profile to get in and out of my garage with the front bar!

On other news Falken have there new tyre out(453's) :banana: ......good news because new better design apparently.....bad news because now there $100 more each! :( I liked it when they were $200 each fitted!

Pics (of the new wheels)

The only gap I am interested in, is on a woman.... dat gap

AAYYOOOOOOOOOO

Or as my dad says: "last time i seen a fork like that had a koala sitting in it" hahahah

took mine for a quick drive last night: it';s awesome! If anyone on the Gold Coast is interested in joining me for an early morning drive on the weekend, let me know: My new baby is due any day now, so I'm trying to get as much driving fun in as I can before it arrives (and before my radiator gets too bad), then I'm pulling the cooling system out and attempting to fight my way through a warranty claim.

Changed oil and filter, as well as the fuel filter. Also replaced my damaged front right guard with a slightly less damaged one.

Now to get it all shiny for the cruise on sunday!

18 x 9.5 +22 Volk Rays Gram Lights 57DR in black

235/35/18 Federal 595 RSR's

GK Tech V2 adjustable Rear Camber & Toe Arms

'93 R32 GTR Pull type gearbox

Extreme cushion button clutch (installed by Kidafa, thanks kid!)

Nismo GT Gear Knob

Greddy Informometer

Pioneer DEX-P99RS

JL Audio C5 6.5" Splits

Series 3 R33 GT-R seats

Greddy catch can w/ speedflow lines & fittings

Setrab oil cooler w/ speedflow lines & fittings

New Nissan Thermostat

Radiator flushed

AM Performance low mount manifold

AM Performance split dump

Garrett GT3076R w/ speedflow lines & fittings

Tial 44mm external Wastegate

Splitfires

Deatschwerk 1000cc injectors

Walbro e85 fuel pump

E85 tune

Ran 290rwkw on the heartbreaker dyno...

Now more serious, new build 50% complete:

Tomei Rods

Tomei Pistons

Tomei Oil Pump

Tomei Sump Baffle

N1 Water Pump

Ross Harmonic Balancer

Deck Shaved

Head fully reco'd

Oil control mods

Supertech Valve Springs and Titanium Retainers

Tomei 256 Poncams

ID1000 injectors with fuel rail and Turbosmart ext. Fuel pressure regulator

Still e85 of course :D

I think that's it, I'll update with the dyno sheet when it's all done... :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...