Jump to content
SAU Community

Recommended Posts

i'm getting a new exhaust and muffler and just wanted to know what ppl think is the best thing to get

i'm looking at getting a Manaflow race series muffler:

#14843

2.25" Inlet, 4" Diam. Tip

2.5" Internal Race Core

Single Wall, Staight Cut

4" Tip Length

14" Muffler Body Length

this any good for a N/A rb25?

and what is best for the exhaust, 2.5 inch or 2 an 1/4inch?? from extractors back

with a cat but no resonator, or should i resonator?

thanks every one!

Link to comment
https://www.sau.com.au/forums/topic/35083-just-a-quick-one-on-exhaust/
Share on other sites

resonator is a definite, i agree. Forgot to ask what the guy who replaced mine was going to use - so i ended up with a lukey race hot dog thingy :( .... murder at 110kmh (open road limit here in WA) 3" pipe probly doesn't help... SEVERE overkill on 2L N/A....:looney:

let us know how the change gos... might do the same thing :thumbdwn:

I got a 2.5" hks system with 2 resonators (hotdog resonator and a 2nd small muffler). It works well - not droney AT ALL. The end main muffler is a big barrel style muffler with 2.5" inlet and has a 4.5" tip - it is not straight through in design. I suggest you copy the design of this system (resonators etc) :D

2.5 is definately the biggest u should go, u should get more top end with the bigger diameter exhaust. 2 1/4 is good for low down power. The muffler itself is straight thru yeah ? i would go the 2.25" and a resonator to save ur hearing, but still have it loud :D

Clint

what brand of rear muffler do you gouys use/recomend? i have some Jaz - Jazma ? -can't rember exactly, something like that - i guess it's some cheap Jap brand, but it is straight through, like the resonator, on the extractors with a full 3" cat also...

just one major question, how would you fit an offset muffler in where ther is currently a straight through?

ie how does this;

| |

| |

goto this;

| |

__| |

??? given the way the pipe runs from the engine (tangled round diffs etc.) then fits into that little scallop out of the rear bar?

Jasma is just a regulatory body, like the EPA is Australia. It's not the brand of the muffler, but if the muffler is jasma approved it means it meets certain noise/pollution requirements and therefore is of reasonable quality. For example, my HKS system has a jasma badge on it.

i'm also thinking about a CAT back system - my budget aint that big - but i want something thats going to sound better and increase performance slightly...

i got quoted 290 fitted for a 'home made job', as the muffler place reckons you can't get one to just bolt on? That was for a 2.5" cat back (might only have been the rear muffler)

What kind of system do you guys recomend for 300-350 ish mark?

anything has to be better than stocko one!

PS: Sorry for the post hijack :D

can some of you guys tell me a few price u payed for your systems?

sorry dude, mine was already there... resonator cost me $120, extractors ~$350 i think ? can't remember exactly... the rest - gawd knows !

i have recently taken off my cat back exhaust as i was driving a bit of a road trip. I noticed quite a bit of power loss all through the range.

and Perhaps a week ago, i put it back on, and damn there is power again, noticable low and high in my rev range, but definately more at top end.

Mine is 2 3/4", and its drony in certain RPMs (mainly at 110 on motorway), most of the time, its sexy. Get a big resonator, big as possible imo.

  • 4 months later...

You've probably already got it by now but go a 2 1/2 inch mandrel bent system. I've got a magna flow muffler, #14827, its a single wall angle cut 4 inch tip, but oval shape. I was told they had a slightly better tone and not as droney... not sure if its entirely true. They also fit more neatly under the car, however i was after the cannon style and they do look a bit better. I highly recommend magnaflow though, just ensure you put a decent resonator on as mine hardly does anything and it's fairly loud!

I think I'm going to finally get rid of the Genie Reverse Flow muffler off my car, its just tooo loud! Currently I have 2.5" Cat Back, with a resonator.

Anyone who has done their exhaust cat-back, what muffler and how much was it? An angled canon style would b good, but not really necessary.

I think I'm going to finally get rid of the Genie Reverse Flow muffler off my car, its just tooo loud! Currently I have 2.5" Cat Back, with a resonator.  

Anyone who has done their exhaust cat-back, what muffler and how much was it? An angled canon style would b good, but not really necessary.

I've used a MagnaFlow Street Serious muffler, the exhaust shop were retailing it for 374 but it may be cheaper elsewhere. Yeah the angled cannon style does look good. This one is an oval shape but exhaust shops do the angled bend if you just get a cannon style

Anyone recommend an exhaust shop in the Melbourne city area that fits magnaflow mufflers and will do it for a good price?

When I got the current exhaust/muffler fitted I asked them to put a flange so it can be unbolted, and its 2" up to just before it bends.

thanks!

chicane

Yeah quite a few places sell MagnaFlows as they're fairly reputable and well known. Depends where in Melbourne you are, i got mine done at Casey Exhaust which is in Berwick, they do a lot of work on high performance cars and have done heaps of skylines. The other place i know of that sell them is Dandy Exhausts but your best to just ring around as i'm sure many other places would stock them

I work in Parkville so yeah anywhere close to the city

What other options are there apart from magnaflow (seems a popular brand) for a muffler in the cannon style that will not be too loud, im sick of the drone of my current muffler.. but not too quiet as well (but under limit).

Cheers :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...