Jump to content
SAU Community

Recommended Posts

  • 11 months later...
  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

please clarify

i have been told from numerouse mag wheel dealers that 9.5 on the stagea is to wide and will creat issues

i am looking at dropping my m35 on some BC BR coilovers and running big break kits witch mean ill be running 19 inch mags

so what size width mags can i get with 19s? that i can use on the stagea that wont rub 8.5s or 9s

if i get a spacer does that mean i can go wider ?

with offset does a - or a + offset mean a bigger dish etc

or do u guys recomend 18s for the stagea

Most Aussie tyre shops only sell +40 as that's all they can get. Speedy, ROH and such all do crap offsets.

Most Aussie tyre shops only sell +40 as that's all they can get. Speedy, ROH and such all do crap offsets.

True.rolleyes.gif

They're starting to get better as more Falcoon & Crummydore owners buy staggered sets for their bombs, and they're getting a bit more savvy to offset & caliper clearance too.

Edited by Daleo

I tried some 19*9.5 +38 on mine with 245/35/19 tyres and they fit perfectly and could even have gone wider on the rear i.e. lower offset.

Do you have any pics? Was there any suspension work done to it? Any rubbing on full lock?

I've mentioned on another thread that I've found some 19x8x5+35 or 19x9.5+40 from Avant Garde (Model M368) that would suit the M35 really nicely.

^ Agree.

I think that with the Nismo suspension I could fit 19x9.5 with a +35 offset and have 3mm clearance. Not enough for my liking.

Having said that, I just picked up a set of Buddy Club P1 Racing 2's which are 19x9 with a +45. Not ideal so will have to probably run 10mm spacers although I don't know how they will sit with the Autech suspension.

If all else fails, they came with 30mm spacers :P

Do you have any pics? Was there any suspension work done to it? Any rubbing on full lock?

I've mentioned on another thread that I've found some 19x8x5+35 or 19x9.5+40 from Avant Garde (Model M368) that would suit the M35 really nicely.

No pics sorry I didn't end up buying them. They were Buddy Club P1's or something. I can't remember how much clearance but it wasn't much and they never scraped anywhere when I drove on them. I have factory bilstein suspension and my car is quite low which would have helped as well. Still, I would have bought them if they were in better condition as I didn't think the clearance was an issue but maybe the bilstein stuff is different to the Nismo or other factory suspension, I don't know.

^ Agree.

I think that with the Nismo suspension I could fit 19x9.5 with a +35 offset and have 3mm clearance. Not enough for my liking.

I

Having said that, I just picked up a set of Buddy Club P1 Racing 2's which are 19x9 with a +45. Not ideal so will have to probably run 10mm spacers although I don't know how they will sit with the Autech suspension.

If all else fails, they came with 30mm spacers :P

Now that I have nisom suspension im looking at wheels. what would these offsets be like

Fronts - 19x8.5 +25

Rears - 19x9.5 +35?? Kinda new to the size and offset thing.

Now that I have nisom suspension im looking at wheels. what would these offsets be like

Fronts - 19x8.5 +25

Rears - 19x9.5 +35?? Kinda new to the size and offset thing.

Will you be running in RWD only? Staggered sizes won't work with AWD.

I reckon the 19x8.5 + 25 would be better for piece of mind regarding possible clearance issues.

The 19x9.5's were a +40 with a 5mm spacer. They fit and cleared the suspension, but not by much.

No spacers needed with this size?

Running 18x9+20 with 235/40/18

Car stits 345mm from centre of wheel to top of wheel arch ,

On bc coilovers

No rubbing at all , no guard rolling needed

Just thought I would share for anyone in the near future

What's your camber settings?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...