Jump to content
SAU Community

Recommended Posts

Hey guys,

when driving in 3rd gear, standing on the throttle at 60 does virtually nothing. At around 4k, the turbo is sitting on around 10psi. Once you come onto around 4800-5k, it hits 15psi hard (cant believe the difference in power between 10 and 15psi). Any ideas why it boosts so late? Has been like this since I changed the turbo but having looked through the dyno results pages - noticed that most turbos are on full boost by 3000, with the larger turbos around 3.5k. Any ideas?

Mods are as follows:

Nistune ECU

Standard Bottom End

Standard Head Minus Tighe 264 8.5 Cams with Adjustable Gears

Gt2876 with 12psi actuator bleed to 15psi

Stock Cooler and Piping

4" intake pipe to Standard AFM

Standard Manifold

Standard Dump Pipe with 3" Exhaust (Highflow cat and Cannon Only)

I can do a bit of a test drive with a video cam and post up the boost guage and tacho if needed or if it helps.

Link to comment
https://www.sau.com.au/forums/topic/352235-rb25-gt2876-15psi-at-4800/
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

first test would be to pull the vac line off the actuator and plug it up and see when you hit your target boost then, but make sure you back off straight away as with everything working it'll free boost.

first test would be to pull the vac line off the actuator and plug it up and see when you hit your target boost then, but make sure you back off straight away as with everything working it'll free boost.

I have done this accidently before - roughly the same boost pattern.

Thanks Captain

Found it on GCG, seems like another new name/combo, Garrett really are getting over the top!

What housings did you get with it?

Garrett Turbo: http://turbobygarret...6R_705330_2.htm

However, this was designed to go onto an sr manifold. So I took it back to MTQ and got a t3 housing - unsure of ratio. The turbo bolts to standard dump pipe so it may be a direct replacement rear housing for this turbo.No machining was needed to fit it to the turbo. I believe the compressor ratio was 0.86

Edited by Stargate

It will be the fact the 2876 has a cropped gt30 exhaust wheel, and the exhaust housing is to suit an uncropped wheel. MTQ should know better.

True?!

I always thought it was a 2871 GTRS with a 76mm front wheel... How sure are you that it is the cropped GT30 rear wheel?

If this was the case, we could use this CHRA to build 2835 variants. Simply have GCG redo it with a 71mm front wheel to make a 2835 spec CHRA or even build a GTX2835.

The only issue will be the exhaust housings, the OP6 would probably be the easiest way to go.

The GT2876R has a 53mm turbine wheel, same as the GT2860RS and GT2871R. It is a TERRIBLE mismatch of turbine to compressor. U get no more than the power of a GT2871 R but the lag of a GT3076R. Even garrett state on their web site that it's not for normal performance applications:

* Best suited for unique applications such as asymmetric turbo installations

* Not recommended for general performance applications

You're really gonna get HUGE gains from a GT2835 or GTX3071R or GT3076R. The GTX3071R would be my pick.

Edited by bradsm87

Yep, it'd be the same as the HKS 2540. That was completely replaced by the GTRS, same peak power with better spool.

Anyway, it's meant to be for small engines running big boost with a T25 footprint. This isn't the only problem as you would expect boost still well under 4000rpm with a 2876 on an RB25. You should get 1 bar around 3500rpm in 4th with a 3071, even lower with 2871 (GTRS).

Did you do the cams and turbo at the same time?

Check your timing and adjustable cam gears.

Timing is spot on with the gears set to 0.

The GT2876R has a 53mm turbine wheel, same as the GT2860RS and GT2871R. It is a TERRIBLE mismatch of turbine to compressor. U get no more than the power of a GT2871 R but the lag of a GT3076R. Even garrett state on their web site that it's not for normal performance applications:

* Best suited for unique applications such as asymmetric turbo installations

* Not recommended for general performance applications

You're really gonna get HUGE gains from a GT2835 or GTX3071R or GT3076R. The GTX3071R would be my pick.

I would really like to get the gtx3071r but since I am attempting to sell the vehicle, I dont really want to spend money on it. Not to mention changing manifolds, piping, exhaust etc.

Yep, it'd be the same as the HKS 2540. That was completely replaced by the GTRS, same peak power with better spool.

Anyway, it's meant to be for small engines running big boost with a T25 footprint. This isn't the only problem as you would expect boost still well under 4000rpm with a 2876 on an RB25. You should get 1 bar around 3500rpm in 4th with a 3071, even lower with 2871 (GTRS).

Hmmm, well as mentioned it comes onto 15psi in second around 70km/h at roughly 4.5-4.8k revs. Breaks traction coming onto boost in first and second, but its very hard to launch (as you could imagine). Kinda fun to drive though.

Considering selling for 8k now, just so I can get my gtr. From what ive heard above, about $2-$3k worth of mods and it will go quite nicely. Shoot me offers via pm if interested...

It will be the fact the 2876 has a cropped gt30 exhaust wheel, and the exhaust housing is to suit an uncropped wheel. MTQ should know better.

Indeed this is why I asked about the turbo itself, I'd be very suspect about it.

Have the gate held shut and test it, but the likely scenario is as above.

Indeed this is why I asked about the turbo itself, I'd be very suspect about it.

ive had this turbo on the car for around 9 months so im sure any warranties (if any) are well and truely void. I suppose I could pull it off and get MTQ to check it out and fix it, but i'm sure it will cost me a few $$$.

Well it wont be under warranty if there is nothing wrong with it... Which there technically isn't by the sound of it

well,ive shot mtq sydney an email asking them is there is any option for a cropped t3 housing with the nissan 6 bolt dump. If not, what option(s) are avaliable for exhaust wheels to suit my housing.

first test would be to pull the vac line off the actuator and plug it up and see when you hit your target boost then, but make sure you back off straight away as with everything working it'll free boost.

I have tested this a few months ago, but will do again tonight just to confirm. No change in boost speed.

+1 for thinking there's something up with that turbo.

I had a genuine gt2876 with a .86 rear housing on an stock rb20 once and i was hitting 18psi just before 4500rpm, so an rb25 hitting full boost at 4800rpm with the same turbo doesn't sound right.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...