Jump to content
SAU Community

Recommended Posts

White whale ready for tomorrow :D changed diff oil now, it was very shiny and had a couple of bits in it so hopefully it'll be better with fresh oil and stop peg legging!

Autobarn were the only people who had Motul FF LSD oil and it was hidden behind some other oil too.

Nope, still peg legging :( heaps.

Only got a 67 :( Which was rather embarrassing seeing as I got a 66 in Dan's 33 :P

New tyres are really good though, getting some good entry speeds, rear is pretty wild though. Maybe need a big wing to settle it down?

Or softer setting on the rear sway bar? softening the rear dampers helps too yes?

Just going off what I read on here

http://www.mcasuspension.com/setup.pdf

So, I've got the Nismo GT Pro LSD 2 way diff.

For future reference and if any one else needs to know about rebuilding a Nismo 2 way here are the two PDFs you'll need

http://www.nismo.co.jp/products/competition/lsd/pdf/lsdpro_price.pdf

http://www.nismo.co.jp/products/competition/lsd/pdf/repair04.pdf

Just putting them here for later :) of if anyone else needs to rebuild a Nismo two way diff.

it should be if it's a gt pro

http://www.nismo.co.jp/en/products/competition/lsd/gt_lsdpro.html

if you pop the shafts out, there will be a 19mm hex head under one of them. You have the option of 3 settings soft med and hard

I didn't install it so I've got nfi, I'll pop the shafts off this weekend and scout it out.

I'm thinking rebuild might be required though because when I dropped the oil out lots of bits came out, looks like some one's put a fist full of 5c pieces in a blender.

New fiber glass guards should contain my wheels nicely.

_1010079.jpg

Edit:

And here is a pic of all the bit o diff that came out. Prolly heaps more in there.

_1010068.jpg

Edited by zoidbergmerc
  • 4 weeks later...

New Cazman adjustable Camber, Traction and Toe arms.

IMG_20120220_065844Medium.jpg

Installed.

IMG_20120220_065824Medium.jpg

Installing them was easier than sitting down, one hint though, to remove the Traction arm, you need to have the camber arm out of the way. I only noticed this after I'd installed the camber arm and had it all torqued up.

  • 4 weeks later...

Got my Diff rebuilt, biiiiig shout out to Martin at Tas Mobile Mech for getting it done for me! Also to Dave.TAS for helping source the parts!

Here is the old vs new shot

_1010516Medium.jpg

hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm, not good!

Fresh Diff felt amazing though and I managed to rip some pretty good skids on Saturday at the Time attack.

468047_10150603802765036_947656690_o.jpg

458502_10150603803160036_36179565035_9136918_866777858_o.jpg

457685_10150603804240036_36179565035_9136934_423462914_o.jpg

I think the 3rd one is my Fav :D Might have to get a print and hang it up at work to remind me why I go there every day.

Results from the day were, 6th in Drift and 2nd in Time attack (Race Class)

Casualties were, another radiator hose and the loom that goes up in the front guard so now non of my accessories work :( Managed to test the endurance of my car though, lasted a whole Time attack session, like 30 mins easy, water temp didn't get above 90 :) I was doing like 2 hot laps and 4 cool down laps then two hot laps, ect ect.

It was a really special day, I just wish more skylines were there to share the experience :) Next time though! all you assholes have to come play too!

Edited by zoidbergmerc

your front bar nearly lasted the whole day to :whistling: jokes aside you and the car did really well :thumbsup:

Hahah yeah that front bar Copped it hard!

Cheers man :)

Here is a pic of me not going sideways, a rare sight I know.

6992135013_beedb0c992_z.jpg

Edited by zoidbergmerc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, hard to find and a pain in the ass to change with the transverse engine. I’ve worked on a GTiR before and it’s not a job I’d ever want to do again. theres a company in South Africa that makes RS3 gearbox adaptors for the AWD SR20 including gearbox mounts, so I could modernise it and go a dual clutch with paddles. For now tho, it ticks all the boxes. Super cheap, can throw the kids and their junk in the back, and SR20 that I can turbo cheaply, a CVT that’s not a dog’s breakfast like the V35, and has 80% interchangeable parts with stuff I can source from the wreckers cheaply…. But it’s still unique. I love the wagon back of the Autech version. It’s cheap enough that I can buy another stock manual FWD Primera with SR20VE, swap the gearbox to the N15 pulsar short gear ratio box, swap out the brakes to the R32 ones I pulled off my 32, register it on club plates and take it racing. $1300 shipping from NZ. Heaps of parts and aftermarket builders for transverse SR20’s in NZ.
    • Hard to say, just pop the rocker covers off and have a look if you think it's cammed. You probably need to replace the valve cover gasket/half moons anyways.
    • From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
    • Remember this is 1988 tech.
    • Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
×
×
  • Create New...