Jump to content
SAU Community

Recommended Posts

Just added bonnet pins and tow strap.

415667_10151045232120658_1244647636_o.jpg

The log book list getting shorter and shorter :)

All that's left.

Roll cage, Install additional bars, One diagonal roof member, One additional horizontal side intrusion bar on each side, one windscreen pillar reinforcement on each side.

Glass parts of headlights to be covered in clear contact.

Find out if I have to remove my window tint, pretty sure it was tinted from factory.

Fix isolate switch so it actually turns the car off, install appropriate sticker.

Install a window net, needs to be mounted in such a fashion that it can be removed with one hand.

Get a P Plate.

Get a CAMS logo sticker.

Get\make Door Cards

Taking the Glass parts out of my head lights now, Thanks to Dan for providing some spares to use!

323475_10151045330620658_584694278_o.jpg

Cooking with Nowelly

Log book list is getting even shorter now!

I got the doors off and trim out to make it a little easier for the fabricator to put in additional bars for cage.

I took the lenses off the headlights, but I'm having trouble finding a good place to mount them on, putting them on the bar just makes it really hard to get on and off, I might have to whip up a little bracket for them out of something so they can be attached to the radiator support.

Window net can be installed when the cage is modified, fkn cheap net didn't come with a bar or clips or anything! /me flipdesk

Window tint doesn't need to\cant come off and it looks like door cards are sorted.

Just the Battery isolate switch needs some experts attention really.

20120929_165936.jpg

Hambridge stylez

:P (For now)

Edited by zoidbergmerc

Jelly level: 12 out of 10.

My R33 is sold, the track r32 is at the mechs waiting to be worked on still, and I've been on trains only for the last 3 months or so in Sydney. When is the super series round you're going in? Might possibly be in tassie ;)

I can email you a diagram for the ISO switch or can do it if you like. I sent nick wedd a diagram for his 180 and he was able to make it work. I have hooked up a few electric ISo switches in r33s as the battery is in the back and it saves extra cables. Still complys with cams as both of them had to be log booked.

How far off racing again are you wools?

That thread is mighty confusing. To many people talking.

If that makes no sense zoid I'll send something through.

Hope to make the Nov meet Damo, but not too worried if I dont.

In that thread, I just followed your drawing.

So I just need to "put the main battery feed off the alternator onto the battery side of the isolator" ??

In a nut shell yes. An in addition to that the Battery feed in the 2 pin plug needs to be cut and moved to the battery stud of the alternator.

Go and see Luke at Tas performance warehouse Peter...he has the window net release kits, they are bloody expensive though for what they are (and a pita to fit).

Nah, I was just going to make something from some rod, flat bar and a spring form a biro.

In a nut shell yes. An in addition to that the Battery feed in the 2 pin plug needs to be cut and moved to the battery stud of the alternator.

Ooooooh, ok... I might take a pic and you can tell me what goes where.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...