Jump to content
SAU Community

Recommended Posts

1 - exhaust

2 - steel intake pipe (no point in having power when the stock one sucks closed)

3 - coil packs (standard ones tend to fail = crappy power delivery)

4 - front mount

5 - vipec ecu (which has a built-in boost controller so its a 2 in 1 mod) with a tune

the reason why i didnt put a pod is because the standard airbox does a good enough job for that power level.

5 is a shit number though.

1) bigger turbo - depending on the power you want, a bigger turbo simply = more power. GT3076r (max 550hp) is the best for a stock engine!

2) better exhaust - on a skyline, the factory exhaust is restrictive, nets you easy power.

3) boost controller - more boost + more power, but you need one of these VVVV at the same time, to make the most of it (see no.4)

4) tuning - nistune or power FC do well on skylines, an important mod if you've got more things to do later on.

5) intercooler - lowers intake temps, colder = denser = more oxygen = more power.

(those 5 things all have to be done together though, you can't do either of those without the other. You can, but this is the best way to do it.

Edited by turbo x-trail

i speak the truth.

you sure do. steel intake pipe is a must for ~240rwkw and over, but with 5 mods only (which is admittedly a silly arbitrary limit) i doubt he would get to that power level safely.

5 mods i would do:

-full exhaust

-FMIC

-ECU tune (with inbuilt boost control)

-coilovers

-wheels and tyres

1. 22 inch Chromies

2. Vinyl graphics, preferably with nismo logos, trust stickers and GTR badging

3. 4inch exhaust with big ass Canon and no mid mufflers,no Cat and loud as F%$k screamer pipe

5. Altessa tailights

If I could include a 6th, it would be a Vent to Atmo Bov, spring tightened to allow for hektic flutterz on low boost

1. 22 inch Chromies

2. Vinyl graphics, preferably with nismo logos, trust stickers and GTR badging

3. 4inch exhaust with big ass Canon and no mid mufflers,no Cat and loud as F%$k screamer pipe

5. Altessa tailights

If I could include a 6th, it would be a Vent to Atmo Bov, spring tightened to allow for hektic flutterz on low boost

how about including the 4th :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - there is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
    • no one recommending speedtek gearsets?   i'm in the same boat as Cosline but rwd, I am holding boost back in third to 600nm at the hubs to save the gear as i make nearly 750nm at the hubs on a mainline
×
×
  • Create New...