Jump to content
SAU Community

Recommended Posts

I have a number of R34 parts for sale:

  1. R34 3-gauge cluster - perfect condition $80
  2. R34 3-gauge surround - pretty good condition, minor wear to the R34 interior paint $100
  3. R34 Orange Front Indicators - perfect condition $20
  4. R34 Manual Gear Surround & Ashtray - as above with 3-gauge surround, some marks/wear to R34 interior paint $75
  5. Nismo 3-gauge cluster - perfect condition, used for a short time before fitting GTR MFD - in original box$250

I've just checked nengun, and the nismo 3-gauge clusters are now discontinued - so here's a good opportunity to pick one up.

I've searched around the forums, and these prices seem pretty spot on what others are selling them for.

Happy to post - send me a message for me to contact postoffice and get a quote on postage.

Pictures of items:

nissan%20triple%20meter.jpg

nissan%20triple%20meter%20cover.jpg

nissan%20front%20indicators.jpg

nissan%20gear%20surround%20ashtray.jpg

nismo%20triple%20meter.jpg

Fs rb20det engine with intake and exaust manifold complete engine and trans with new yellow jackets $1400 no blow bye doesnt smoke serviced reguarly with hpr 15 penrite need this gorne make offers and come take it out

A few things i have for sale that are no longer needed.

Firstly is a Blitz active type clutch which is a twin plate clutch built by ORC for Blitz.

It can be used as a single or twin plate and is one of the only clutches to be able to do so.

I have had it in my car for the last three years and it has done under 5000km of City driving it has never been tracked.

I am asking $2000 ono as it cost me $3000 when i bought it.

It comes with clutch, bearing carrier, thrust bearing and flywheel bolts.

My loss is your gain as i only found out about this being able to be made into a single type clutch after i had already installed the new NPC clutch.

R34 GTT front and rear rotors and Hawk Pads(Unknown type as cam with car) - $300ono

10inch subs - $50 each ono

OK I still have some Clipsal tickets for sale ....

1 x 4 day Pit Entry Gold $195

1 x Saturday Pit Entry gold ticket $85 (general admission price at the gate)

1 x Sunday Pit Entry gold ticket $88 (general admission price at the gate)

Obviously these are premium Gold tickets in a great position, with a giant TV screen opposite, are undercover, and you have access to all the Gold areas!

OK I still have some Clipsal tickets for sale ....

1 x 4 day Pit Entry Gold $195

1 x Saturday Pit Entry gold ticket $85 (general admission price at the gate)

1 x Sunday Pit Entry gold ticket $88 (general admission price at the gate)

Obviously these are premium Gold tickets in a great position, with a giant TV screen opposite, are undercover, and you have access to all the Gold areas!

no good for me, but have a mate possible keen on the weekend pass. Will let you know tomorrow.

gotta get rid of these stuff come and take it!

R33 GTR spoiler fibreglass ; $120

R33 GTST Blitz nur spec exhaust ; $250

or the whole lot for $350

photos can be seen

>> click photos

contact ; 0411166292 ask for Peter

Cheers

Edited by rawr.

>>>> HKS EVC 5 <<<<

got this in my car but im gonna go back to adjustable actuator

LCD doesn't light up but i think its because i haven't wired the power for it up correctly

comes with everything you need to have it running

$400 or swap for other after market electronics

pic:

http://i53.tinypic.com/alizpl.jpg

pmed

Edited by rawr.

Bumpn

Wrecking T-Boned R33 :( Everything good on passenger side, Everything on drivers side is toast.

RB25 DET Complete Motor = KM's: 97,000Kms

Condition: Excellent, No leaks, serviced every 5,000Kms.

Turbo Auto Transmission - Serviced at 65,000Kms. Great Condition

High Flow R33 Turbo - Fresh Rebuild Only Done 15,000Kms max

Auto/Manual Turbo ECU with Loom

Front Rotas & Calipers, Brake Booster etc.

Reason For Sale: Was T-Boned By A Blind Bat

Also comes with EVERYTHING you would need, bolt it in and off you go. E.g. Alternator, Powersteer Pump, Injectors, Injector Rail, Exaust Manifold, Coil Packs etc etc etc - All complete.

Will take $3400 for EVERYTHING, open to offers. - NEW price

Will seperate if cannot find a buyer for the lot,

Please email: [email protected] or phone 04500 43974

Keen on turbo how much

Trust MX front pipe for RB26DETT.

Dent in the usual spot from a previous owner, was still flowing perfectly. Only replaced due to going to the Greddy dump/ front pipe extension.

Take it away for $100 ono

EDIT: Also have standard 32 GT-R manifolds.

Perfect if you are doing a turbo swap, get these port matched before you start then just swap them over with your old ones!

$100 also

Hi guys.

I've got a S2 rb25det 133,xxxkm bare engine suiting rebuild for sale $550.

Also a full brand new unopened VRS gasket kit that will include for an extra $400, this kit has FULL gaskets for intake manifold, head gasket, head seals, exhaust manifold, turbo gaskets (dump etc) and retails for over $500.

Please PM any enquiries.

FOR SALE

R32 GT-R WHEELS WITH CENTRE CAPS

Tyres Also..

Full Set of R32 GT-R standard rims, centre caps included (1 cap has 8-10mm scratch on face)

General condition of all four rims are above average, some understandable gutter rash on front left, all other rims only have very minor areas around the outer edge of rim that are flaked away.

Tyres also barely worn, Kuhmo Ecsta SPT 205/45/16 on front set and 225/45/16 on rear set. The previous owner of these rims ran them on his street driven Toyota MR2, therefore explaining the differences in tyre width. Altogether, I would say the tyres themselves still have absolute minimum 85% wear.

'

These rims have never been on my R32 and I purchased them for track days but I have decided against putting it on the track and am now exploring other avenues.

Asking $750

Anyway it's just a set of wheels so I wont babble on, I have pics ready to email PM if interested

Alternatively, give me a call or text on 0457408477

post-79191-0-77966300-1300427365_thumb.jpg

Hey all got my Wheels up for sale

17x8 and 17x9 Enkies .. unknown offset, guessing around +35/38 ish

with... good tyres with around 65-70% ...

PCD; 5x114.3

Price; $500

Contact; 0411166292

will not post interstate looking for local sale only

cheerio..

post-83684-0-00492100-1300466793_thumb.jpg

post-83684-0-83526200-1300466811_thumb.jpg

Hi guys.

I've got a S2 rb25det 133,xxxkm bare engine suiting rebuild for sale $550.

Also a full brand new unopened VRS gasket kit that will include for an extra $400, this kit has FULL gaskets for intake manifold, head gasket, head seals, exhaust manifold, turbo gaskets (dump etc) and retails for over $500.

Please PM any enquiries.

I've put a full description and pics in its own thread here:

http://www.skylinesaustralia.com/forums/topic/357959-sa-rb25det-suit-rebuild-full-vrs-kit/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...