Jump to content
SAU Community

Recommended Posts

for sale brand new 17'' x7 multi 4 stud BSA TE37 works copys "vork ravs" +40 et decent dish perfect for 180, silvia, gemini , r31, any 4 stud pattern. 3 still in boxses 1 with tire on it for fitment check ect never used, looking for $650 ono same rims go for 850+ on ebay and these are the BSA ones not the cheap chinese copy copys lol, pm me if interested ,no longer needed so need em gone.

cheers Jase

post-76904-0-06893000-1308311057_thumb.jpg

post-76904-0-47352500-1308311219_thumb.jpg

need these gone quick $550 bargin things i need to buy :thumbsup:

R33 Sedan (4 door) side skirts and rear pods. these are genuine Nissan parts; not fibreglass junk copies.

Side skirts are in primer, will probably just need a light sand, then ready for paint. Rear pods are painted, so will require sanding back, primer then respray.

Will fit both Series 1 and 2 sedans.

Pretty rare items, asking $230 for the lot. (wreckers ask $260 and upward just for the skirts alone)

can send pics on request - contact via PM.

sold!

POSTING UP FOR A MATE SO ALL QUESTIONS TO HIM PLEASE, TEXT IS BEST AS HE WORKS ALL DIFFERENT HOURS.

2000 RS4 STAGEA

3 MONTHS REGO

87 XXXKMS

FULL LEATHER AND WOOD GRAIN INTERIOR

18INCH RIMS

FULL BODY KIT

FRONT MOUNT INTER COOLER

3INCH TURBO BACK EXHAUST WITH ULTRA HI FLOW CAT

HI FLOWED TURBO WITH 3076R CORE ( HAVE RECEIPTS )

IMUL COMPUTER

TUNED AT 200KW @ THE WHEELS FROM AUTO SOLUTIONS AT THE BEGINNING OF THE YEAR

recipts for $1000 SENT ON A SHIFT & PRESSURE IMPROVER KIT (DONE BY PREVIOUS OWNER)

FRONT BAR IS CRACKED BUT WILL BE FIXED A.S.A.P

$12800 o.n.o any cash offers considered as he is moving to vic for work.

LOCATED IN GILLIS PLAINS S.A TEXT IS BEST 0412 053 257

post-70223-0-47120700-1308538637_thumb.jpg

post-70223-0-27462300-1308538653_thumb.jpg

post-70223-0-60318600-1308538666_thumb.jpg

post-70223-0-35570500-1308538687_thumb.jpg

post-70223-0-99543200-1308538697_thumb.jpg

Pretty low power for a 3076?? how exactly did the owner get the Impul tuned,

they can't be re-mapped(i was going to buy this car when it was for sale 18months ago, but didn't for this reason)

1: R32 "A" Piller mounted boost guage trim to suit 60mm guage $20ono

2: HKS Boost guage and loom (60mm) $50ono

3: Steel Mate 386M Remote Central Locking System (No Actuators came with kit) $50ono

4: 2x 5 stud 25mm Bolt On Spacers $100 FIRM - Need to sell spacers ASAP

5: Trust 5spd gear knob off my r32 (It's very pretty) $50-------SOLD

6: R32 2door L&R boot trim $5 each (Left side has a crack at the flappy bit)-------New item

Or take Boost guage and piller for $60.

Central locking kit was bought for my Daily but never got round to instaling it (Has never been used)

Boost guage will NOT come with vaccum pipe due to it being used for another guage. .

RB25det sump $40

R33 sr2 wing needs paint $40

GTR wing no end caps needs painting $200

R33 Air Conditioning Condenser gtst 1994 $40

R33 gtst sr1 front wiper motor $30

R33 gtst sr1 rear wiper motor $35

R33 gtst sr1 climate control $40

R33 gtst fuse box and cover $20

R33 gtst sr1 brake booster and master cylinder $65

R33 gtst sr1 bonnet hinge set $15

R33 gtst overflow and washer bottle $25 for both

R33 GTST MANUAL ACCELERATOR/BRAKE/CLUTCH PEDAL SET $70

R33 gtst battery tray need painting $15

R33 manual gear shift boot/plate $20

R33 gts-t rb25det Genuine manual radiator in good working condition $45

RB25 R33 GTST SR1 CAS CAM ANGLE SENSOR AND BRACKET $55

R33 clutch master cylinder $30

R33 RB25 skyline power steering reservoir with lines $20

RB25det fuel rail $20

RB25det sr1 stock injectors all work fine but some have broken plasic ends but can replaced $25

R33 Air Conditioner Compressor with lines as seen in pic $65

r33 gtst front door speaker pods $10

RB25det sr1 aac valve $50

r33 gtst sr1 carbon bonnet bought from autobarn paid $1300 a few years back only used on my car for a few months just been sitting in my shed. has a few light scratches $450

bonnet vent (uncut vent)fiberglass $70

Pretty low power for a 3076?? how exactly did the owner get the Impul tuned,

they can't be re-mapped(i was going to buy this car when it was for sale 18months ago, but didn't for this reason)

it isn't a 3076, it is a 3076 core, eg the ball bearing core, it probably is just a very mild BB highflow.

R32 GTS Sedan

RB20DE AUTO

160K

Decent respray in XR6 Purple

Vertex Kit

Deleted rear spoiler

18" Rims / reasonable tyres

Car is in excellent condition, Interior is mint and has been well looked after.

Mechanically had no issues bar a failed 02 sensor which was replaced by morpowa.

Drives extremely well and is outstanding for its age.

Car is my sisters.

Call/Text 0402.621.974

$7200 Neg.

Cheers

Nick

post-13621-0-50424200-1308651337_thumb.jpg

post-13621-0-78621200-1308651454_thumb.jpg

post-13621-0-58345300-1308651515_thumb.jpg

selling my 3076... Roll's should buy it cause its epic for a NEO.

$900 for a nearly brand new turbo.. bargain!

link here http://www.skylinesa...73#entry5876273

If my car was finished and I had cash to blow I would seriously consider it, if by some fluke of nature you have it lying around in a month or two I'll hit you up :P

TYRES

ALL PRICES ARE AS PAIRS

14"

15"

2x 185/55 - Hancook Optimo (one is flatspotted a little) - 60% tread - $40

16"

17"

2x 205/50 - Mismatched pair - 60% tread - $60

2x 205/50 - Mismatched pair - 70-80% tread - $80

2x 215/40 - Fulda - 50-60% tread - $60

2x 215/40 - Mismatched pair - 60% tread - $60

2x 215/45 - Pirelli PZero - 40-50% tread - $50

2x 225/45 - Michelin Pilot Preceda - 40-50% tread - $50

2x 225/45 - Mismatched pair - 70-80% tread - $80

2x 235/45 - Mismatched pair - 60-80% tread - $70

Wheels

RAYS ENGINEERING - VOLK RACING - Challenge Zero

17x8" +32 and 17x9" +35 // 255/40 and 235/45 tyres, 70-90% tread

- $1450

PARTS

UNIVERSAL

TRUST GREDDY gear knob: $50

R32/R33 3" Bell-mouth Dump/Front pipe - $170

R33:

Wrecking Whole R33, tell me what you're after (no gearbox or ECU)

RB25 Engine, has everything minus ECU, turbo and injectors (can include some 550's for a little extra) - $1500

6x NISMO Sidefeed 555cc Injectors (RB25) - $500

R33 HKS SuperDragger Exhaust: $450

R33 APEXI Front Strut Brace: $100

R33 Rear Strut brace: $90

R33 Brakes, uprights and hubs (complete) - $900

R33 VLSD Diff with housing and half shafts: $220

R32 GTR

R32 GTR grill: $140

Brake Master Cylinder Stopper/Reinforcer (stops firewall flex) - $80 << SOLD PENDING PAYMENT

R32 GTS-T

WRECKING R32 HALF CUT MINUS ENGINE PARTS AND GEARBOX (ask in here what you're after)

Stock R32 Parts

Suspension/Steering

2x Front Sway Bar - $40ea

2x Front Complete upper control arm assembly's including bracket and king pin bearing - $100ea -- PICS PICS

2x Front Camber Arms - $40ea -- PICS

2x Front Passenger side Lower Control Arm - $60 -- PICS

2x Rear Traction arms - $35ea -- PICS PICS

2x Rear Camber arms - $35ea -- PICS

2x Rear Hub Uprights - $100ea -- PICS PICS

2x Rear Complete Uprights - $70ea

1x Rear Subframe - $100

2x Rear Toe Rods (non-hicas) - $35ea -- PICS

1x Rear Toe Rod (hicas) - $50ea

Misc:

1x RB20 AFM - $100

2x Doors, 2door (coupe), silver - $100ea

2x Drive-shafts - $50ea

2x Stock Clutches, 1 half warn, one fair bit more warn - $30 and $70

1x Stock Rear Spoiler (with brake light) - $50 -- PICS

3x RB20 Coilpacks - $30ea

1x Turbo Timer, very basic timer, manual set - $20

located near mitcham in SA

sold a fair bit of shit, updated.

front s15 hubs , knuckles & lower control arms

perfect for s13 5 stud front conversion and will give you a bit more track

comes with custom AB Fabrication sleeves for s13 suspension

$350

PM me

------------------------------------------------------------------------------------

HKS EVC 5 (LCD doesnt illuminate, possibly wired in wrong in my car) $300

Edited by DamageInc

FOR SALE

2x z32 afm's with plugs and trust airinx pods $250 each or $450 the pair

power fc handcontroller $250

contact via pm or 0423776884

power fc handcrontroller for r32gtr will throw in a power fc with a fried track(fix it if you can) for $250

r32 gtr wine red aluminium bonnet with minor dent in front right $350 BARGAIN

post-27156-0-65418700-1308783954_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...