Jump to content
SAU Community

Recommended Posts

Rb20 DET Engine

Complete Standard Engine

Turbo

AFM

Intake Pipe

Has had an easy life, standard clutch, turbo, stock boost and stock exhaust.

Does not have, Coilpacks, or Power Steering Pump. Other Than that it is complete.

$650

R32 Flywheel + Standard Clutch

$100

R32 Airbox and Intake Snorkel

$150

JJR RB20 Coilpacks (removed from Different Engine)

$250

r33 cusco coil overs $800

r33 rear strut brace $150

r33 s1 headlights good condition could do with a polish but no broken bkts $300 pair

boot carpets/lining $80

Taillights $150 the pair

mirrors $30 a pair (3 sets 2x silver 1 x black)

17" mesh rjr rims painted black near new tyres front 30% rears $700

heaps of other bits just ask

heaps of other bits just ask

Sparco style quick release steering hub - brand new, surplus to requirements. Moves the steering wheel closer to you for those with longer legs and a more rearward seating position. And - its removable. Extra security for your car when it doesn't have a steering wheel...........

$100

Walbro fuel pump, 255L/h part# GSS 341. Used but in great condition. Will include a new sock and used plug/harness $60

20121122_200540.jpg

Trust Airinx II Filter, great condition. $50

20121122_201513.jpg

K&N Pod Filter, genuine, good condition, recent clean/oil. $65

20121122_201450.jpg

20121122_201442.jpg

Greddy E-manage - used but 100% working. The unit gives 16x16 adjustment to ignition, injectors and afm voltage. Can be used when upgrading injectors and AFM. Can also be used to delete AFM and use MAP. Comes as just the main unit. All the instructions etc are available from the Greddy website. Looking for $200

20121122_201534.jpg

20121122_201542.jpg

Greddy E-manage Support Tool - Comes in original box (slightly squashed) and includes the software on CD and the special cable needed to link it to the unit. Cost me over $110 selling for $60 ono

20121122_202639.jpg

Greddy E-manage Ultimate Harness N-9 - Brand new, never been plugged it, original packaging - suits 180SX SR20 1/91 - 9/93. Plug and play harness. Could also be sacrificed to become a field harness for a Emanage or Emanage Ultimate to suit any car. These are selling for around $275 on Ebay, I want around $100

20121122_201420.jpg

Prices are negotiable so make an offer.

Aaron

Edited by Race__24

r32 bonnet catch unsure if it suites other cars maybe r33 $30

r32 gtr catalytic converter in perfect working order, thread is still there for the sensor, insides intact. $75

rb20 cam covers , and rb25? got fittings still in it and hose the connect the two $70

greddy profec b spec 2 boost controller came with car dont really want it it works great, still in car $275

R33 fibreglass vented bonnet as seen on last page of the for sale - $300 ONO

r33 air con includes everything, still in car will be out sometime soon

unsure of price on this sorry so if interested offer me a price via PM

same goes with a carbon cannister i have for sale

bald r33 stockies @ $25 a wheel i think i have about 4-6 i could sell

all in great condition really

post-86412-0-34933300-1353483820_thumb.jpgpost-86412-0-56325400-1353483832_thumb.jpg

think thats it for now! thanks

Hey the stock wheels they all 33 and I see black and silver do u have a black set of 4. ????

Can you pm me I tried wouldn't let me

EOI: i have a set of OZ Racing F1 18'' rims on my stagea that im wanting to replace with new rims but i have to sell these befor to keep the wife happy, they need a paint but there in pretty good shape from what i can see..

does not come with tyres as they will be going on the new wheels.

Im looking for $500 ono for the set of 4

I can text you a pick of them if you like just pm me your number.

Thanks

DJ

Item Summary: R32 4 doors sedan rb20det Auto

Location: South Australia (Adelaide)

Condition: Used

Reason for Selling: don't need anymore

Asking Price: $3,600 ono or make any reasonable offer

Delivery Methods: Pick Up

Contact Info: pm me or phone 0431173841 Eric

Extra Information:

R32 4 doors sedan rb20det Auto

Matt Black,

GReddy Informeter

Alpine touchscreen DVD player

D1 style front fenders

URAS style front bumper

HKS air filter

The car drive good , and the condition of body is ok, have crack in front bumper, scratches on the left hand side rear fender

$3,600 ono or make any reasonable offer...

http://www.carsales....aspx?R=12132881

post-41322-0-36818200-1353642755_thumb.jpg

Edited by ericrx7

i still have a set of 17 x 8 and 17 x 9 jap prodrive rims

skylinewheels.jpg

comes with good tyres, back 30 - 40 % front 80% tread left

suit r33 32 etc.

will take $600 cash for a quick sale

Edited by dangerman4

Twin turbo setup to suit rb25 r33gtr turbos with stainless manifolds, piping etc all to suit rb25. Has dump pipes and front pipe to suit stagea.

These belong to my brother and he is looking to move them on... Please phone him rather than pm me as he has the details... His number is 0437 162 077

94 silver R33 gts-t manual

might sell this 33 whole as something else has popped up and missus wants it gone as having family over for christmas haha :P

good for tracker or might be able to get back on the road car is straight

missing few bits as sold them off, bumper, reo, grill, seats, headlights, no ecu (borrowed a mates to run) runs ok has blown exhaust gasket

$3600 byo wheels and struts

FREE: rear cards for 2dr R32 gtst, need a good clean. Also have great condition aircon unit + fan unit + heater core and a few ac vents. Come take em or they're goin in the bin. Other bits for sale: Q45 AFM $100 - R32 gtst climate control $40 - interior light $10. Make an offer!

post-77777-0-67542800-1353749856_thumb.jpg

post-77777-0-49319200-1353749867_thumb.jpg

r32 bonnet catch unsure if it suites other cars maybe r33 $30

r32 gtr catalytic converter in perfect working order, thread is still there for the sensor, insides intact. $75

rb20 cam covers , and rb25? got fittings still in it and hose the connect the two $70

greddy profec b spec 2 boost controller came with car dont really want it it works great, still in car $275

R33 fibreglass vented bonnet as seen on last page of the for sale - $300 ONO

r33 air con includes everything, still in car will be out sometime soon

unsure of price on this sorry so if interested offer me a price via PM

same goes with a carbon cannister i have for sale

bald r33 stockies @ $25 a wheel i think i have about 4-6 i could sell

all in great condition really

post-86412-0-34933300-1353483820_thumb.jpgpost-86412-0-56325400-1353483832_thumb.jpg

think thats it for now! thanks

bonnet gone, cam covers gone

only have 4 bald r33 wheels left at 25 a wheel each

greddy profec now $250 and is out of car now

post-86412-0-20031600-1353826948_thumb.jpg

HKS GT2535 Full Kit for R33 RB25DET. Great condition with minimal shaft play and ready to bolt straight up to your GTS-T.

Includes turbo itself, elbow and silicone joiner/shield, all lines, basically everything you need to swap out with your standard turbo. I'll include some new turbo to manifold bolts. An easy 250-260rwkw with supporting mods.

$900 ono. Pickup from 5098.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
×
×
  • Create New...