Jump to content
SAU Community

Recommended Posts

i was having a conversation with a workmate today (he worked for nissan dealer servicing for 15yrs apparently), we start an innocent convo about the impounded datsun 1600 sitting out in our yard. He says now thats a classic car, which i agree with then say "and it has a nice FJ conversion" (which it did) which he didnt agree with, saying the "CA20" is the best engine in the world....long story short the discussion turns to, what the RB25DET engine name stands for....i told him RB = Race Bred 25 = 2.5 litre capacity D = double over head cam E = electronic fuel injection T = single turbocharger....he disputed all of my claims and said all the titles stand for the symmetry and ratios of the engine or something...what do all these engine names stand for -- RB, SR, FJ and CA.....lastly.. *cant stop laughing*.. he claims that the RB30ET from the VL calais turbo was a holdens idea, apparently they engineered the turbocharging of the engine and the japs had nothing to do with it....

Link to comment
https://www.sau.com.au/forums/topic/354985-rb-sr-fj-ca-etc-engine-names/
Share on other sites

I don't think anyone knows what the SR, RB, U (points for anyone who knows what those are. Without looking it up on google) stand for, if they do indeed stand for anything, but the D, E, T do stand for Dual camshaft, electronic ignition and turbocharging.

As for the RB30ET being an australian developed engine (developed in the term of, holden throwing the turbo onto it), I wouldn't say that that's out of the question tbh. But i don't know either way who did it. go research.

I don't think anyone knows what the SR, RB, U (points for anyone who knows what those are. Without looking it up on google)

Yup!

Had one sitting in an unrestored 2000 Sports for a couple of years before I eventually sold the car (whilever one owns a rally car, a full ground up restoration on an antique Jap sports car is just NOT going to happen). Think I might still have the workshop manual here. 46mm inlet valves and twin Solexes - mmmmm emissions goodness :thumbsup:

Almost as rare as the S20 these days

RB = Race bred - I don't think so, tim

CA20's were fitted to S2 Blueys and weren't that good in stock form (I don't think they have a lot of potential either)

I think that th eiron block, twin cam layout between CA18 and RB26 is about as far as the family resemblance goes.

D = double overhead camshaft

E = Electronic FUEL INJECTION (not ignition!)

T = Turbocharged

The number is displacement rounded to the first 2 digits.

The letter prefix simply refers to the family of engines. Ignore it, and what you think it stands for, Nissan engineers probably got a 5 year old to point to 2 letters in the alphabet and went with it for good luck. Insert a myriad of other explanations for it, we aren't going to resolve what has been debated for years within the confines of this thread. In the end, who cares?

Was there anything JDM that used the RB30ET? If not I'd say it was completely Holden's doing. They did buy the rights to the RB30 from Nissan AFAWK.

D = double overhead camshaft

E = Electronic FUEL INJECTION (not ignition!)

T = Turbocharged

The number is displacement rounded to the first 2 digits.

The letter prefix simply refers to the family of engines. Ignore it, and what you think it stands for, Nissan engineers probably got a 5 year old to point to 2 letters in the alphabet and went with it for good luck. Insert a myriad of other explanations for it, we aren't going to resolve what has been debated for years within the confines of this thread. In the end, who cares?

Was there anything JDM that used the RB30ET? If not I'd say it was completely Holden's doing. They did buy the rights to the RB30 from Nissan AFAWK.

RB30 was export only in passenger cars...I think it was on used in the Patrol's in Japan, but thats it

RB stands for Runs Bearings and SR stands for Shits Rockers, lol

the design of the CA is very similar to a RB with 2 pots cut off, but not exactly spot on, and certainly not a RB26. rb20 maybe.

from what i am aware, the RB30ET was a holden design.. sort of. nissan designed the engine (holden used it because of new emissions laws being introduced and getting the old 202 up to standard wasn't worth it, in a similar way that nissan scrapped the RB and SR at the end of the 90's/early 00's), holden did the turboing.

  • Nope 1

the CA from my understanding is basicly that a CA18 is a RB26 with two cylinders cut off

You are most probably correct in saying this. CA18DET motors are Nissan's strongest rated factory motor horsepower-wise. Basically, out of any performance Nissan motor, they can produce the most horsepower without being re-built, somewhere around the 600rwhp figure, and part of this is due to fact that the CA18DET is a cast-iron block, while the SR20DET is an alloy block like that of the RB-series.

  • Nope 1

As a professional code breaker in the internet. Here is what I think the first 2 letters mean.

1st letter = Indicates orientation of cylinder in the block, R/C/L/S, etc = inline, V= v configuration. Observe: RB20DET and VG30DETT

2nd letter = Indicates generation of the block, B/A/R/Q, etc. Newest generation of engines are designated to Q's! VQ38DETT!

I don't know.............

You are most probably correct in saying this. CA18DET motors are Nissan's strongest rated factory motor horsepower-wise. Basically, out of any performance Nissan motor, they can produce the most horsepower without being re-built, somewhere around the 600rwhp figure, and part of this is due to fact that the CA18DET is a cast-iron block, while the SR20DET is an alloy block like that of the RB-series.

Ummm dude RB's are all cast iron blocks.

don't forget the ca18i, the most awesome engine ever produced by nissan. So awesome it doesn't follow the naming convention or need the twin plug stupidity of the ca20. It's bottom end is factory rates to 600ps but Nissan didn't want to unleash such an engine on the unsuspecting public so limited the power to 80ps with it's sohc rocker snapping awesome sauce head.

D = double overhead camshaft

E = Electronic FUEL INJECTION (not ignition!)

T = Turbocharged

The number is displacement rounded to the first 2 digits.

The letter prefix simply refers to the family of engines. Ignore it, and what you think it stands for, Nissan engineers probably got a 5 year old to point to 2 letters in the alphabet and went with it for good luck. Insert a myriad of other explanations for it, we aren't going to resolve what has been debated for years within the confines of this thread. In the end, who cares?

Was there anything JDM that used the RB30ET? If not I'd say it was completely Holden's doing. They did buy the rights to the RB30 from Nissan AFAWK.

i know that JUN Auto from japan had turbo'd the RB30E before holden, so maybe thats where they got the idea...

Ummm dude RB's are all cast iron blocks.

exactly right. the rb are an alloy head, but still a cast iron block.

also the CA isn't a RB26 with 2 pots cut off. they are a similar design to the RB engine, but aren't simply a 4 cylinder version of it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...