Jump to content
SAU Community

Recommended Posts

Yes this build has been the longest ever for me, however good comes to those who wait!!!

This is why I bought the Z-tune :whistling:

I'm already at 12 months and have achieved nothing like you have, your build is looking amazing :unsure: but fingers crossed it will be on a car trailer to Ingleburn very soon for finishing touches :banana:

words cannot describe how amazing this build is. that manifold should be in an art museum not on a car lol, and its great to see theres guys out there that are still willing to share there knowledge.

good luck mate cant wait to see the final product.

hey Bobby spoke to you last nite or this morning on the picton cruize lol i have finally read this thread all 18 pages I MUST SAY INSPIRING i cant wait to see this finish and ill go visit John

its looking great got to hand it to John great work

Not much of a cruize , did you end up racing anyone?

Yes John has put alot of effort in this build, i will be seeing him tomorrow and will see what else he has done!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...