Jump to content
SAU Community

Can You Just Take The Stickers Off A Turbo Skyline And Be Able To Drive It On Your P's

newdog1
 Share

Recommended Posts

ecliptor Enthusiast

ecliptor

Posted
Posted (edited)

Why would taking a sticker off the car fool cops or anyone???????????

1. the cops would just run your car's detail's

2. the cop's can just pop your bonnet and look inside, plus you realise you cant hide your side/front mount intercooler

3. If you have an accident you won't be covered by insurance, as you aren't meant to be driving it to start with

Edited by ecliptor
  • Like 1
Mayuri Krab Grand Master

Mayuri Krab

Posted
Posted (edited)

When I bought my car, I noticed that the t from the "Gts25t" sticker above the driver side tail light was missing.

OP owned my car b4? :ph34r:

Also IBTL...

Edited by Mayuri Krab
BoyWhoCriedWolf Grand Master

BoyWhoCriedWolf

Posted
Posted

I took the turbo badge off my GTR and then the clock stopped working.

Id leave the badges on if you want to know what the time is.

ARTZ Grand Master

ARTZ

Posted
Posted

You guys are so mean, dont listen to em mate

Truth is there is actually a sensor in the car that knows if the person driving has a full license, so even if you remove the stickers it wont work until you have a full license..Sorry buddy but your out of luck..

alr33x Grand Master

alr33x

Posted
Posted

gtr badges on falcons is ultimate stealth mode.

maybe you could put a blanket over the engine so if the cop pops the hood all he will see is your nan's pro double weave

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...