Parts Substitute Questions

[filo_a31]

My old ceffy had hicas and i went through alot of trouble with front steering racks. I tried an s13 hicas rack and a s13 normal rack. In both cases the rack bolted up the same but the lines were totally different. In the end i ended up getting my old rack rebuilt

[Miguelone]

Is your car one of those duet things?

[a31rb25]

My old ceffy had hicas and i went through alot of trouble with front steering racks. I tried an s13 hicas rack and a s13 normal rack. In both cases the rack bolted up the same but the lines were totally different. In the end i ended up getting my old rack rebuilt

Rip out the hicas, then you can use a non-hicas S13 rack.

[filo_a31]

you make it sound easy. Unless you want to fabricate new lines it wont work. where the lines come out off the pinion housing are in a totally different location

[a31rb25]

Fabricating new lines is easy, pay somebody.

Edited December 1, 2012 by a31rb25

[filo_a31]

Is there a known substitute for A31 front wiper regulator?

[Miguelone]

Fabricating new lines is easy, pay somebody.

Yep, You could possibly swap the housings over too if you really wanted, might as well chuck a rebuild kit through it at the same time though.

[RBC33]

I think I've asked before but the answer was vague, I need a definite working solution for handbrake cables. I have a manual centre console and mounted handbrake in my laurel, I need to know what legs (front section of cables that split to 2 off the handbrake lever) and rear cables to use on my laurel. Has s14 rear hubs. Seeming as finding original ones are rare as rocking horse shit. Dunno why I threw away my old 4 stud hubs when I was cleaning my old place to rent -__-'

[RBC33]

Bump anyone?

There's a set handbrake cables off an s13 t peice back and r32 t piece back to hubs on both an if either would fit I want to grab them.

[Kris..]

c33 and a31 door mirrors the same?

[funkymonkey]

Kris, kinda. I ran S13 on mine no probs.

[Aubrey107]

I know this is a dumb question, but just making sure. do the facelift cefiro front guards fit a pre facelift cefiro without any modifications? A31? cheers

[Nic_A31]

Yes, but the grooves in the panel won't match the doors unless you have later model doors too.

[Jstylerobert]

For my C33

Front and Rear Reo

Anything else fit?

[Dan_J]

looking at your build its a track only car......make em out of RHS/SHS a bit of 40x40 fits in the chassis rail to bolt on for the rear just need to get a shorter bolt for the fuel tank straps

[Aubrey107]

ok got another question. I got a a31 rb20e auto but want to get a lsd because i keep on three wheeling and gets pretty annoying. could i use any other LSD diffs from a different car mine one is a 3x2 bolt pattern

[Dan_J]

are you sure its isn't just a loose r200 (lsd) and not a r180 ( open wheeler).

with my old lsd you could turn the direction of the shafts apart by hand.

skyline and silvia diffs will fit pending abs, backing cover swaps and front diff mount bushes for the s14/r33 and up models

Edited May 29, 2013 by Dan_J

[Aubrey107]

its defentaly a open wheeler! dont want to do the cheap way and just weld the deiff up. but a good excuse to upgrade the diff to an lsd. its a non abs model. i heard that s13 and r32 diff bolts straight into a cefiro ? pretty sure the r32 can, but not quiet sure about the s13 diffs

[Jswljones]

Yes 180sx 5 bolt diff will bold in I have one in my car now.

So will J30 and Z32 just FYI

[trxbal]

anyone know if a rb25det forward flacing plenum will fit on to a rb20det?