Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

  • 1 month later...

I visited Johnny last month and won a bet. Johnny bet I could have a steer if I could get n and out of the zed cleanly. Much to his disappointment I fit in there nice and snug. It's a nice cockpit. Looking forward to a test drive soon!

Car is looking very serious now. It should be well up the point end. :)

Custom lightened flywheel (4.5kg) to suit 7 1/4 (184mm) twin plate motorsport clutch. This flywheel matches the VQ30DE with bell housing adapter and Z32 gearbox.

7 1/4 (184mm) twin plate motorsport clutch.

My link

  • 1 month later...
  • 1 month later...

After busting a head gasket at Superlap on the stock motor and finding it's limit, we are now bulding a tuff motor and increasing to 3.5 litre. Using Darton Sleave kit (closed deck) using VQ35HR head gaskets which are much better. This requires modifying the engines coolant flow and does away with the two rear thermostats, yes the VQ30DET runs three thermostats and high temp ones for emissions reasons, they open at 95 and 105C, crazy and not good for racing. We are using a VQ35 crank, modifying the block, forged rods and pistons. Whilst at it we have slightly ported and then polished them and domes. We relieved the dome to match the 95.5mm pistons up from 93mm. Also adding ARP main studs. We had everything Cryo treated.

After busting a head gasket at Superlap on the stock motor and finding it's limit, we are now bulding a tuff motor and increasing to 3.5 litre. Using Darton Sleave kit (closed deck) using VQ35HR head gaskets which are much better. This requires modifying the engines coolant flow and does away with the two rear thermostats, yes the VQ30DET runs three thermostats and high temp ones for emissions reasons, they open at 95 and 105C, crazy and not good for racing. We are using a VQ35 crank, modifying the block, forged rods and pistons. Whilst at it we have slightly ported and then polished them and domes. We relieved the dome to match the 95.5mm pistons up from 93mm. Also adding ARP main studs. We had everything Cryo treated.

  • 9 months later...

Custom lightened flywheel (4.5kg) to suit 7 1/4 (184mm) twin plate motorsport clutch. This flywheel matches the VQ30DE with bell housing adapter and Z32 gearbox.

Pm'd about the adaptor

7 1/4 (184mm) twin plate motorsport clutch.

My link

  • 1 month later...

After busting a head gasket at Superlap on the stock motor and finding it's limit, we are now bulding a tuff motor and increasing to 3.5 litre. Using Darton Sleave kit (closed deck) using VQ35HR head gaskets which are much better. This requires modifying the engines coolant flow and does away with the two rear thermostats, yes the VQ30DET runs three thermostats and high temp ones for emissions reasons, they open at 95 and 105C, crazy and not good for racing. We are using a VQ35 crank, modifying the block, forged rods and pistons. Whilst at it we have slightly ported and then polished them and domes. We relieved the dome to match the 95.5mm pistons up from 93mm. Also adding ARP main studs. We had everything Cryo treated.

I was thinking about this.. you're making a vq30 a vq35 basically by swapping the internals. A vq35 head flows more and you could possibly fit the vq35 heads with some mods... but all that work to make a vq30 a 35 why not just buy a 35?

  • 4 months later...
  • 4 weeks later...

It's been a long while we haven't put an update for our Slot Car now with VQ35 & twin 3071 turbo's.

Here are the links for the latest updates.

http://www.uniqueautosports.com.au/PAGE15.htm

http://www.uniqueautosports.com.au/PAGE16.htm

  • 6 months later...

Here's the link to our new website.

http://www.uniqueautosports.com.au/gallery/project-unique-zed.aspx

Won't be going to WTAC this year, it's just out of our budget at the moment. We'll be there though helping and watching, keen as!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
×
×
  • Create New...