Jump to content
SAU Community

Recommended Posts

So, i was sick of the stickers from the dodgy paint so i figured i would pull the stickers off and just put some white vinyl or something over them to look clean from a distance, BUT that didnt exactly go to plan so now i need the bonnet resprayed properly :dry: I was planning on going to a Blits bonnet and getting it painted but i dont have the time now so ill just get the heavy ass steel one done....

Although its a pain in the ass at least the shitty HT sticker is now off! No more laughter from a certain DVS man! :nyaanyaa:

kmjJWl.jpg

GBjJMl.jpg

v17xwl.jpg

1Zc4Nl.jpg

So the bonnet is going to the shop tonight, fingers crossed itll all be complete and back on by Thursday!

Bahahahaha

At least it's still shiny

You buffed it to bare metal man! :P Nah all good, it will look heaps better with the paint fixed! Its still pretty shiny thanks to you!

now i see why you need your bonnet painted lol

Told you it was bad :P

Removed it at 5.30pm, at panel shop at 6, work commenced at 6.15pm!! Love it.... Bare metal Respray and some dents to be fixed too :yes:

So bonnet is off and it is down with the painter for repairs, he noticed 2 minor dents which ive never seen and also suggested we respray the lip. He is going out of his way to work on it of a night for me which i am really grateful for especially given the Thursday deadline....

CBwN4l.jpg

GU9ssl.jpg

GREX oil cooler block with Thermostat has been ordered thanks to the help of Dean for locating it for me!! Will run custom black braided lines and speedflow fittings for the stealth factor :ph34r:

always seems to be some old V8 around, what tyres you using on the rear? would it smoke more if the tyre was soft compound, im trying to figure out how to make the most smoke when i do a burnout at the drags next, smoking out the spectators would be a awesome feat :yes:

Edited by SliverS2

always seems to be some old V8 around, what tyres you using on the rear? would it smoke more if the tyre was soft compound, im trying to figure out how to make the most smoke when i do a burnout at the drags next, smoking out the spectators would be a awesome feat :yes:

Yeah soft tyres should be better for smoke.... They are just 275/35/18 Nexans.... No grip lol

But they would pump smoke of you have good wheel speed and stay stationary, that was peeling smoke while moving at a fair pace.... There is a video coming from a car behind on one of the laps so I'll finally see how much it made lol...

The more traction you have, the more smoke it will make.

Challenge accepted!! At least you finally got some sort of skid video :P

  • 2 weeks later...

how was power cruise mate?!

Wow i have been slack with updates..... Had fuel pressure issues but was still good fun, heaps of video on Daves phone and also Sams Go Pro, just need to get it uploaded...... Here are some pics -

4w8XCl.jpg

d06gjl.jpg

n8J0Xl.jpg

i0dwNl.jpg

So the night before Powerplay we decided an Oil Cooler should be on the cards so we made one up -

ZN9oXl.jpg

MVBcxl.jpg

GUwz0l.jpg

FANukl.jpg

It is sitting nice and high out of harms way but will need some finishing touches like ducting etc, the oil temps are good on the track the way it is so i am pretty happy overall.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...