Jump to content
SAU Community

Recommended Posts

Sorry i couldn't make it guys , one of my lower front ball joints were damaged (f**k knows how it wasn't very old) but i couldn't find a replacement until about an hour ago , i even had the gearbox out to replace the noisy throw out race lol , atleast i know i'm a sure start for the next one :( . How did it go?????? looked like a nice day for it!

  • Replies 127
  • Created
  • Last Reply

Top Posters In This Topic

Excuse the French, but holy shit one of the best f**king days of my life, first couple of laps were a bit terrible, then tried to go faster and braked too late for a couple of laps, then felt like it smoothed out toward the end :)

Perfect day for it, and a really good turnout. Definitely should do it again :)

f**king EPIC!!!11!!

I'm hell up for a working bee BBQ on anyones car. I need to learn a heap more about this. But as Jack said earlier on monthly is probably a bit too much for my budget, keen to go along to watch if others are going though.

Pity you couldn't make it mate, really good day :)

Yeah what an epic day! I had heaps of fun just hanging out, got a ride in a couple of cars too which was awesome.

Here are some Pics.

_1019585.jpg

_1019554.jpg

_1019602.jpg

_1019572.jpg

_1019567.jpg

_1019562.jpg

_1019628.jpg

_1019632.jpg

_1019600.jpg

and here is the link to the times I jotted down.

https://spreadsheets.google.com/ccc?key=0AulhL1L89CwwdFphNzRvZXFzb2M5MG4zLWdqbEh3NVE&hl=en&authkey=CJ29mJQF

Missed a good track day Toff.... sun was out, air temps were down and there was only half a dozen cars running so everyone had heaps of time on the track.

Good day and it was good to put names to 'screen names'

Justin

yeah great day guys, always learning, looking forward to getting out there again with some improvements to my car. well done to those who helped organise it. Good way to spend a sunday, with like minded datsunoholics

Missed a good track day Toff.... sun was out, air temps were down and there was only half a dozen cars running so everyone had heaps of time on the track.

Good day and it was good to put names to 'screen names'

Justin

yeah i'm spewin , teach me for leaving things till the last minute :( , wasn't game on tracking it with a loose ball joint , i ended up getting a mate to drop me one down but figured it was too late by 2pm to come out . you busy tomorrow mate , i'll call you re parts around 12-ish

annoyed i couldn't get out there can't work out whats going on with my brakes rant.gif

looks like it was a good day, hopefully ill be there for the next one

i got a hoist if you need it in the air one weekend? , what are your brakes doing??

who crashed their car btw! hope the damage isn't too bad

Edited by toffy

i have a super soft pedal almost to the floor soft & no rear brakes bled them numerous times but still nothing theres no pressure getting to them.

master cylinder fail?

all in all, i had an awesome day! 1st laps out was shit due to mass missfire in high rpm range.. lucky had some new plugs thanks to the awesome jamie , swapped them over.. and it appears he took a photo lol.. turns out 5 plugs were .7 gap.. 1 was 1.1..... lol... car ran beautifully next few runs until i took brodie out, several laps, new pb.. car decided it needed to get super hot (115) and steam itself up in the pits lol.. all in all ive decided.. i need a new diff.. gearbox.. and a bunch of niggly issues fixed before next outing. good to meet people again!

also... jacks car... an animal... i swear he was trying to show off since i was in the car.. with all those spins :-P

not noticable in daily driving mate, if it's soft all the way to the floor nearly , i'd be checking all of your brake lines/calipers for leaks or signs of tampering :) , does it loose fluid at all?

the booster is working fine? you probably can't tell but if that's worn/damaged it can cause similar issues

Edited by toffy

who crashed their car btw! hope the damage isn't too bad

It was Tim who had a bit of a spin a little in front of me on the hill, brakes locked up and did a little spin :) basically completely pulled up before the tyre wall though, damage was a slightly bent exhaust and a few scratches on the rear left panel :)

My entire family turned up to show support at the exact point this photo was taken and thought I had trashed my car :P

also... jacks car... an animal... i swear he was trying to show off since i was in the car.. with all those spins :-P

hahah, oh its not very friendly is it! same boat as you mate, got some things that MUST be done before i hit the track again, the beast must be tamed =)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...