Jump to content
SAU Community

Recommended Posts

help needed!!

ive got an rb20det r32, current mods, FMIC, 3" exhaust dump back, intake, custom tune set to 8psi... really keen on increasing boost to say about 12psi... just new to the import scene and was thinking increasing boost at the cheapest option.. maybe e boost or dual stage controllers im unsure.

any help or advice would be greatly appreciated??

cheers

steve :P

Link to comment
https://www.sau.com.au/forums/topic/360888-cheap-effective-more-boost/
Share on other sites

lol it should be at 12 psi with those mods . 10 is standard . -will get a 1-2 psi increase with exhaust and sill see 1-2 more psi at the intake manifold with a less restrictive intercooler ( your fmic) . you sure your boost gauge doesnt read in bar or kpa x 100 or kgfcm2 ? it would point at a number 8 to be about 12 psi

boost gauge os turbo is f**ked . do not buy a boost controller to fix this .

what was the custome tune ? put a rag in the intake ? lol

the boost guage reads 8psi?? possible faulty guage( brand i Calibre).. this is how i bought the car, the previous owner said the car car was tuned at performance workshop in kirrawee nsw set to 8psi.

ive been looking up the turbotech and they are the cheapest and have had awesome feedback from everyone here on SAU..

before i install it should i hook up another boost guage to assess?

spewing if the turbo or guage is effed :(

How did you get it to 8psi stock is 10psi?

+1

May have an R33 actuator on there? That's got a max of 8psi...

Get a manual boost controller or a cheap EBC and dial her up son. Nothing will increase your boost except a boost controller or actuator. I'd say you have a different actuator because if the diaphram inside shat itself you would be able to flow as much boost as the turbo can flow. So in your case it would be about 13-14 psi with stock turbo...

An exhaust system will give you the ability to run more boost more efficiently but it wont automatically increase your boost LOL

Boost will not be increased unless the wastegate is being told to do so and this happens via the actuator.

+1

May have an R33 actuator on there? That's got a max of 8psi...

Get a manual boost controller or a cheap EBC and dial her up son. Nothing will increase your boost except a boost controller or actuator. I'd say you have a different actuator because if the diaphram inside shat itself you would be able to flow as much boost as the turbo can flow. So in your case it would be about 13-14 psi with stock turbo...

An exhaust system will give you the ability to run more boost more efficiently but it wont automatically increase your boost LOL

Boost will not be increased unless the wastegate is being told to do so and this happens via the actuator.

cheers mate, as i dnt know much about this car, only a few mods from what i can see, it could have a 33 turbo set up (would this explain the earlier spool then other rb20's ive driven?) ... i understand boost cant be changed unless the actuator allows... ill hook the controller up and turn a click or so see what happens :P hahaha

cheers mate, as i dnt know much about this car, only a few mods from what i can see, it could have a 33 turbo set up (would this explain the earlier spool then other rb20's ive driven?) ... i understand boost cant be changed unless the actuator allows... ill hook the controller up and turn a click or so see what happens :P hahaha

No I'd say the earlier spool would be concerned with not having a boost controller/proper tune done. The R33 turbo does spool a bit quicker but then again you may have a high flowed turbo like me which spools much quicker than your standard turbo.

Best thing is to hook your ebc up and have a play. If your boost controller doesn't make a difference to the boost, there will be a problem with your actuator.

Also, once you have an EBC it will give you a digital reading of boost as opposed to a needle on a cheepo calibre guage that could very well be out by a couple of psi.

i just swapped out my r33 actuator for an r32 actuator.

i tested both (out of the car) with a gauge attached to the line.

the r33 opened at 7psi. the r32 opened at 10psi.

i always thought it was 5psi for r33 too, but not so it seems.

btw paul, i've never heard of an r32 actuator being 12psi.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...