Jump to content
SAU Community

E85 Do I Have Enough Fuel?

krzysiu

By krzysiu,
in Engines & Forced Induction

 Share

Recommended Posts

brentos Community Regular

brentos

Posted
Posted

I made 370+rwkw with a Nismo pump and Nismo 740cc injectors, as have many others.

You will be fine.

The nismo intank will be enough for you wont have any problems great pump if dont want to go external surge tank setup.

Thanks guys. Do you know what the Nismo pump is HP rated to or how many LPH it can flow in comparison to the 040?

A few that I have found on the net say they are Nismo fuel pumps for GTR's, I am assuming this will have no problem fitting one like that in my GTS-T? When installing would I need to drill out any restrictor to get the max flow out of it like I did on the Bosch, or can I just install as is?

Does anyone know where I could pick one up for a reasonable price in Melbourne, saves me waiting for one to arrive in the post

Even though you were using a 040, but is the consesus still that a Bosch 044 mounted intank will die a premature death if using E85?

Very curious as I'm running a 044 intank and I want to switch to E85 but just wondering if anyone has ran E85 since the last post and had good results :thumbsup:

Thats not to say every Bosch pump be it 040 or 044 will die using E85, I was just speculating on why mine failed but I don't know for sure. Maybe somebody who has been using these pumps for prolonged periods can share their experiences

brentos Community Regular

brentos

Posted
Posted

been using 044 in e85 for 1 year now no problem.

Do you have your 044 intank? I know its meant to be an inline fuel pump but can it be installed intank? My friend has a spare one thats all and I can get it tonight, if I could do it that way at least I could use my car until the Nismo arrives

go the nismo pump brent

Cheers Hamish - I will try and source one from Japan, hopefully it doesn't take too long to get here. Any ideas of the usual delivery times from RHD?

boostn0199 Grand Master

boostn0199

Posted
Posted

Do you have your 044 intank? I know its meant to be an inline fuel pump but can it be installed intank? My friend has a spare one thats all and I can get it tonight, if I could do it that way at least I could use my car until the Nismo arrives

Nup I have my nismo intank and my 044 is mounted inline externally with my surge tank.

brentos Community Regular

brentos

Posted
Posted

I have just picked up a Brand new 040 tonight for an awesome price so at least now I will be able to get the car back on the road.

I am still intending on getting a Nismo pump down the track its just right now getting the car on the road ASAP was my number 1 priority.

I will drain what is left in the tank tomorrow (United fuel) just as a precaution, as the fuel pump had problems shortly after using that fuel from that particular station (i'm not blaming the fuel or the station I am just being cautious). I am also under the believe that the United blend might have a higher ethanol content then the advertised E85 as I've heard it is often around the E90 mark & the guy at the servo stated that often it is E90. Going by that theory is it possible that a 90% ethanol blend with only 10% unleaded might have seized my pump due to lack of lubrication? I might be completely wrong with what I have just said but its just a thought..

Anyhow, after putting my pump in tomorrow I shall start with a fresh batch of Caltex E-flex which will generally have a lower ethanol % and see how I go

I will report back after using it for a while and let people know whether the same thing happened or not

SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

Brent, ID1000's, Nismo intank, 400rwkw - Trent said no issues what-so-ever.

As for United, Braeside has varied between 83-85% Ethanol over the last couple months, seems quite consistent :) My sensor has yet to read anything higher than E85

Caltex has been bang on E70 for ages, sensor never read any different except for i period during winter last year when it went into the 60's, but never seen it change from E70 since and i've been on United for about 3 tanks.

Daz: Aren't we running similar setups? why so hardcore? You didn't need to change the lines either, standard will cope fine.

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

So has anyone tried the Denso pump (also sold as Tomie etc) performance similar to or better than the Nismo for less money:

http://www.trademe.co.nz/motors/car-parts-accessories/performance/fuel-systems/auction-457494569.htm

or

http://www.ebay.com/itm/DENSO-1020-RACING-FUEL-PUMP-240SX-300ZX-SUPRA-SKYLINE-/220657495319?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3ANissan&vxp=mtr&hash=item3360362d17

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Unpeeling the Orange

      By MBS206 · Posted

      I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • Kinkstaah
      Unpeeling the Orange

      By Kinkstaah · Posted

      The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • MBS206
      Unpeeling the Orange

      By MBS206 · Posted

      The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • MBS206
      What brakes on R34 GTT(Europe)

      By MBS206 · Posted

      For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...