Jump to content
SAU Community

Recommended Posts

Hi I have got around the $1000 dollar mark to spend on buying and install. I can buy an exedy heavy duty clutch kit for 500 and fitted for 450. I might buy a néw pressure plate also.

Clutch kits usually come with a contact plate, pressure plate and thrust bearing. Don't let your budget decide your clutch, let your intended purpose and power output decide it. Exedy cushion button is a good clutch for that price range, but it may be overkill for the power output, or it may not be sufficient for what you need.

Link to comment
https://www.sau.com.au/forums/topic/362066-clutch/#findComment-5783749
Share on other sites

A Exedy cushion button should last for ages at those power levels as long as you dont slip the clutch to much or do lots of burnouts/ high revving launches. If you are planning on doing some launches i would suggest the same clutch but not cusioned. It can take huge amounts of abuse but is more of a track orientatated clutch because of the heavy peddle and quick take up.

Of course if your budget is more then $500 theres definetley better clutches that are both stronger and easier to drive, have a more effortless peddle. Depends what you wanna spend or what power level you want in the future.

Link to comment
https://www.sau.com.au/forums/topic/362066-clutch/#findComment-5792328
Share on other sites

Contact these guys for a clutch alignment tool http://www.directclu...ervices.com.au/ paid like 20 bucks i think for mine

May also want a torque wrench and loctite if ur goin to do it properly

Legend! I was looking for this tool. Did a search on the forum for this and your post came up. Dropped them an email and awaiting their reply.

Thanks heaps for this link!

Link to comment
https://www.sau.com.au/forums/topic/362066-clutch/#findComment-5806192
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...