Jump to content
SAU Community

Recommended Posts

Ok Im not a fan of anything rice and spending $150 on a piece of sheet alloy with a $90 degree bend in it and a few holes wasnt my idea of fun. So after looking on google there were plenty of DIY out there for different cars. I got my inspiration from a few pics of them for the 34 GTR (can get them for your specific model of car if you wish) and to give me a general idea of the shape etc etc. My finished product is by no means perfect but for a fun cheap DIY im very happy with the results.

Took me a few days of tinkering here and there. Cost me $15 as i had the paint at home.

tools required were:

Files (flat and round)

10mm spanner

flat tip screwdriver (for popping out a few clips)

drill

angle grinder or other cutting device (plasma cutter etc)

bench grinder/snader if possible (you can just use the files)

Materials:

Cardboard

sheet of alloy

Paint if required

First of all was the cardboard model:

DSC03209.jpg

Next I bought a piece of alloy, cost me $15 and traced the pattern:

DSC03210.jpg

I used the workshop at work and first cut the pattern with all the holes out. I was lucky as we have a plasma cutter at work, sounds fancy but is only good as you are at making a straight cut and requires a fair bit of sanding in the bench grinder/sander etc.

Once all parts were cut and drilled I then made the bend as required.

Once its all cut you will most likely need to make adjustments to get it to fit, cardboard just doesnt represent alloy all that well for the amateur like myself. Metal smith=no worries.

And it resembled the following:

DSC03211.jpg

Due to the tool marks and clamp marks I painted mine black (plus i prefer it on the white car):

DSC03212.jpg

Before installation:

DSC03164.jpg

And fitted:

DSC03213.jpg

DSC03214.jpg

DSC03215.jpg

Link to comment
https://www.sau.com.au/forums/topic/362521-i-made-my-own-cooling-plate/
Share on other sites

does this actually do anything?

Yes, it forces all air coming through the grille to go through the radiator, rather than some going over the top of the radiator support; bypassing the radiator completely. Air will always take the path of least resistance

I've often wondered if it would be beneficial to duct the intake snorkel down through the cooling plate to pick up some of that cool air too.

Edited by Daleo

i was just about to attempt this exact same thing for my 34gtt. only ones i can find for a gtt are 150-180+....and they are not worth that much coin. ill post pics up soon as i bash one out. great job mate! looks killer. btw, how did you go about the 90deg bend? and what thickness plate did you go for?

thanks mate

LOl thanks guys,

I Used 1.5mm alloy, its a good thickness, easy enough to work with.

For the 90 degree bend i just marked where i wanted the bend to be, then placed it on the bench with the marks for the bend on the edge of the table and hit the over hang with a hammer (I have a soft head hammer, so it didnt mark the metal). It required a few little love taps here and there once i started fitting to the car, but it come out straight.

THAT LOOKS AWESOME MATE!!!

do have a question tho.. i thought that air for the air filter came from there? i might be completely wrong but im looking at doing somethin similar but addin an air duct in the plate directing some of the air to the original factory air duct..

Cheers

Herbie

do have a question tho.. i thought that air for the air filter came from there? i might be completely wrong but im looking at doing somethin similar but addin an air duct in the plate directing some of the air to the original factory air duct..

The airbox snorkle will just suck air from wherever it can find it :) I think this will restrict some of the cooler air but i doubt it will have any effect.

BTW, looks fantastic! Quite keen to give it a crack on mine now

THAT LOOKS AWESOME MATE!!!

do have a question tho.. i thought that air for the air filter came from there? i might be completely wrong but im looking at doing somethin similar but addin an air duct in the plate directing some of the air to the original factory air duct..

Cheers

Herbie

Thanks Mate

All the cooliong plates i was looking at like the ARC ones etc etc all run the same desgin i used. I figured if theres runs like that it cant be that bad for the cool air.

I gave it a crack as well, didn't even use a cardboard template.. just measured and drew on the ally.

Shitty camera phone pic at night but you get the idea. Have edged it with some split 4mm vaccum tube and will paint it black when I get a chance to grab some UHT Black.

Will also look at some "wings" to go down the sides between the cooler and radiator (have gutted aircon and mounted 2x thermo fans where the condenser used to be).

post-31803-0-60115100-1305611446_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...