Jump to content
SAU Community

Recommended Posts

Hi Guys! (I can say that because I'm the only female and I'm typing this!! For the second time, it dissappeared the first time :) )

Adrian (aka Strutto or Hero) and I were talking tonight and decided that it was time for another super dooper saturday night skyline cruise!

James (Belgarion) and I organised a huge skyline cruise last year and we ended up having 30+ skylines attend. We didn't expect this many people and unfortunately had nothing planned after the cruise to the BWCP and people dissappeared because they were bored. The site along the M1 of all the dinner plates looked absolutely awesome.

So this time, we are going to do the normal drive to the BWCP and then move onto another destination (to be disclosed on the night) for some more super dooper happy fun.

The details are as follows.

  • Date: 17th April 2004 (Weekend after the Easter long weekend)
  • Time: 7:00pm Meet, 7:30pm departure
  • Place: Springwood Mall, Cnr Fitzgerald Avenue and Rochedale Road (next Red Rooster)
  • Destination: Broadwater Carpark (off the Gold Coast Highway, opposite Australia Fair). Once we've sat at the BWCP for a few hours or so (when people start to get bored) we will head off to another undisclosed location. Everyone who wishes to continue on from the BWCP will be told on the night (will also be located on the information sheets that we will hand out (does someone want to offer to print this out and bring them on the night? I don't have a printer))
  • Conditions: No stupid, wreckless or arrogant driving will be tolerated on the night. I don't care how awesome you think you can drive, but this cruise is neither the time nor the place to try and prove it. This behaviour will not be tolerated and if you think you can't abide by the above rules, don't even bother turning up.
    CB's (UHF's) will be a necessity and can be picked up fairly cheaply from many different shops. The channel that we will use, will be provided on the night.

I will keep an updated list of the people intending to participate in this cruise. If you have any further queries, please pm me and I'll be sure to reply (I'm only on the net weeknights so please be patient for replies). I'm sure Adrian will also be able to answer any queries.

Maybe we could even line this up with the official launching of the SAu Qld sector club? Slip? Gary? What are the timelines your looking at?

Definites

  • NismoGirl and Krawler
  • Strutto
  • Bryanlee
  • 4 doorz
  • Mindflux
  • wados
  • Nexus9
  • NA_R33
  • GenesisR32
  • Belgarion
  • 51OOO
  • CGB_R32
  • MJ
  • R33Steve
  • Ska
  • TeamKrazy
  • Knore
  • ImpulR33R
  • GOR33
  • owned
  • Junior Zilla
  • Shane
  • yotis
  • Mick51
  • yoparata
  • Zoix
  • Swordfish19792002
  • Gary1
  • FYN33
  • Paulie_Bro
  • darrinspencer
  • twoquik
  • SEX-DR
  • Panikin
  • CYA34
  • CYA32
  • JGB33
  • Lach
  • R32PIMP
  • Jev
  • Robocop
  • Oz
  • Dangerous_Daveo
  • Reyne
  • rsx84
  • Josh H.
  • STU E
  • slamm
  • Mr GTS4
  • yamutha33
  • 57UBN
  • Blitz_R33
  • R32-Drifter
  • DJ Singerad
  • Melv
  • White R32
  • WiZardOz
  • JGB33
  • Bobjones
  • geno

Maybes

  • jaqule
  • nismoman18
  • Smoothline
  • MM2death
  • sir31
  • kryz
  • slip
  • MAX007
  • V8skylineMAN
  • R33 Girly
  • Trent
  • sxe33
  • HKS34R
  • 33bobby
  • gtrchick
  • 05YKO_r33

Link to comment
https://www.sau.com.au/forums/topic/36256-massive-skyline-cruise-number-ii/
Share on other sites

  • Replies 232
  • Created
  • Last Reply

Top Posters In This Topic

hey there. I havent been on a skyline cruise yet, but very keen on this one .... just needa check up on my uni scheduale. I can get free black and white printing

cant do colour sorry. But yeah I'll be more then happy to do the printing.

i will be there ... however from my experience in cruse organising, especially night crawls (ive organised 80+ cars ones back home)

shit normally falls apart if something is to be decided on the night, i understand locations should not be posted due to police presance on the website, however, could we please have some indication of where we are going after the broadwater please?

YAY for NismoGirl and your local Hero!!!

Lets make this one huge guys... There's plenty of notice so I expect everyone to be there. ;) I for one, can't wait to see 30+ Skylines together on the M1 as well as at BWCP... Lets show them what we're made of!

Regular cruisers have been to the destination before... That should give you some hints... I'll have some maps with directions available on the night... Brush up on your navigation skills people!!!

I might even bring the Missus and kids along. ;) A babysitting roster will be distributed before hand... :)

But seriously, if anyone has any questions, please feel free to contact either Erin or myself and we'll endeavour to help you out...

Signed,

Your Hero...

Will try my best to be there , that's if the line in out of the shop by then ( jaqule's fingers crossed ) if the line in not ready may just go to the BWCP to check it all out but not go on the crooz as I will be in my girl's little lancer . Nodout it will be a great night and yeah would be great to kick start the Qld SAU club on the same day . Keep the "club update" posted with any new details please .

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
    • Yes then it will turn on but I want the car features to work  
    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
×
×
  • Create New...