Jump to content
SAU Community

Recommended Posts

The last of my fruity bits from the stagea are listed below; prices do not include post.

Parts are located in regional SA, can deliver to Adelaide for free and can post interstate at buyers expense.

Mike

Garage Impul reclinable Recaro bucket seats with rails. Mint. $1000

Price is firm, that's 500 per side including rails - you can barely get a worn out grubby bride for that and these are genuine optioned Recaros by Impul.

IMG_0068.jpg

Cusco adjustable rear camber arms $250

100_1533.jpg

Cusco adjustable rear toe arms $200

100_1532.jpg

Cusco adjustable front camber arms sprayed 'stealth black' $350

partsround2.jpg

100_1544.jpg

Modified series 2 headlights. $450

CCFL rings, projectors, LED, HID etc (check HERE for more details)

yamazaki0930-img600x450-1297492683hcbfks53632-1.jpg

100_1620.jpg

Couple of sets of series 2 tail lights $250 per set

100_1570.jpg

Carbon fibre look interior trim to suit series 2. 4 pieces. $150

100_1514.jpg

Tanabe trans tunnel brace. $200

Bolts between chassis rails beneath transmission.

P5250107.jpg

Bolts up like this:

bracepic.jpg

Chrome sil panel covers, grey plastic trim. $100

The chrome bits can be pulled off and re-glued to your existing trim if wanted. Average condition.

100_1519.jpg

damn those seats have the same fabric insert as my seats and trims ......hmmmmmmm tempting.

still got the rear cusco arms?

Hi im interested in the sil trims! Do you know a rough price on delivery to Melb? p/c 3166 ( if it helps) Also how do u go about payment?

Cheers Ash

nice 'LESS THAN10' post dickhead... find another set anywhere round the place... if u do... compare condition... these seats are as cuddely as gtrs but as nice to sit in as any luxury car...

pm if ur gna shoot prices... oh and if u wernt aware mikes now living a few hundred ks out of adelaide.. maybe this is a delievery fee increse?

piss of to ur s13

gday

just wondering why the seats are on sale on the silvia forum for $800?

Exactly the kind of thing id expect from people lurking around that place...

I think your questions been answered buddy

Are you even interested in the seats or you one of "those people"?

Are you saying they aren't worth the coin?

What was the purpose of your post?

P.S. M I K E I am currently trying to raise the spondoola for your lights, might take me a bit - hope I'm not too late when I get it together!

Edited by SatchiThaStagea

gday

just wondering why the seats are on sale on the silvia forum for $800?

just sayin... wondering why the price has gone up since october.

http://www.nissansil...howtopic=463001

Cut & pasted from the sales guidelines.:thumbsup:

2. No price debates - put simply if you do not agree with the price being asked, do not comment on the thread. If you believe the seller is asking too much then either pm the thread starter or dont buy the items advertised - simple.

There is to be no "My cousin can get it for much less" or "Your asking too much" comments

+1 for daleo's post. if your goin to sign up to a forum at least read the rules!!

hey Mike, do those impul seats give you a lower seating position than the stock stag seats??

Thanks guys, but it doesn't bother me that he can google the seats etc - if I didn't want that information to be available then it would take 2 seconds to remove. Seats on nissansilvia are mine and yes, they were advertised originally (there and here) for less; as many know I was trying to raise the money to import another car at the time which didn't eventuate, and I'm no longer in a position where I want to give them away/rip myself off. I am more than happy to keep them.

As per initial post, if you want the seats: 'Price is firm, that's 500 per side including rails - you can barely get a worn out grubby bride for that and these are genuine optioned Recaros by Impul.'

Sachithestagea: No worries bud, if you want to check them out in person before hand you'll have to let me know in advance so I can bring them down to Adelaide with me.

Raysboostin: Yep, the seats drop you quite a way from the standard 'bench' seats. I guess it would be comparable to r32 gt-r seats in stagea, or thereabouts?

And Adam is correct, I'm now situated 400k's from Adelaide on a shift roster so please be patient - I'll get to replying to pm's etc when I can

:)

Hey dude,

just wondering where abouts you got the headlights done... drop me a pm when you get this

Much appreciated

if you pm him your details inc name adress number and maybe even look on the northine freight website and see where it your nearest depot. im sure mike will me happy to sort sumthing out.

mike ive used these guys b4, more than welcome to get em to pick em up from mine if needed :)

i did a gearbox for about 200 from vic i think it was... not as big but its fairly heavy...just so u can get an idea i spose

Raysboostin: Yep, the seats drop you quite a way from the standard 'bench' seats. I guess it would be comparable to r32 gt-r seats in stagea, or thereabouts?

roughly how much would say?? 1-2 inches??

Hey,

Still very interested in the sill trims. Might have been overlooked due to the silvia guys dissagreement.

Wondering if they are still available. :)

BLU SKY: apologies mate, I did overlook it. the trims look to be sold to another member pending post cost, but I'll get a price to your post code also in case it falls through.

Raysboostin: I can't give you an exact measurement as I don't have my stagea up here with me - this is the best I can do at the moment, hope it's of some help. measurements are shown from the centre of the mount holes, and the last from the base cushion.

seat1.jpg

seat2.jpg

seat3.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...