Jump to content
SAU Community

Recommended Posts

Hey guys, picked up this r32 gts-t to use the motor, box loom ecu, etc etc for my cefiro.

Parting rest of car out.

Has had a decent hit in front, moved drivers side strut tower over a bit, rail however looks straight. Im not a panel beater though. It is not written off either.

As above, im taking motor, loom, ecu, gearbox, alternator, power steer pump. Everything else is avaliable.

Interior is very neat, apart from wear on steering wheel and handbrake boot.

Rear quarters, boot, lights etc all in good condition, it looked like a neat example before it met its untimely death.

Some prices

Has stock exhaust from front pipe, rear muffler is a cannon, $250

Unknown brand front strut brace (straightend out one bracket) $50

Stock struts and springs (good for clearing defects) $200

Slotted rotors and front calipers with still heaps of pad left $300.

Blitz BOV with piping to suit r32, $100, with come with blanking plate for stock bov.

etc, etc,

Best to call or pm if after anything specific.

r32front.jpg

IMAG0603.jpg

r32inside.jpg

r32rearseat.jpg

r32strutbrace.jpg

bov.jpg

Alternatively, once I pull what I need out I'm after $1400 for the remaining car.

Located in Nowra NSW.

pm or 0400257530

Edited by CEF33Y
Link to comment
https://www.sau.com.au/forums/topic/363545-stripping-r32-gtst/
Share on other sites

Gearbox now for sale, $400

Rear lights $50 each

rear bar $100

Boot lid with stock wing $100

doors, complete with glass, trims, mirrors, switches $100 each

Stock front seats in immaculate condition $150 pair

rear seats in immaculate condition $100

Left hand headlight $50

Wheels in pic, 16's, with 225 50 16s yet to check exact sizes of wheel, guessing 16 by 7 or 8, with offsets around 35, tires average $300

Prices neg, to a point.

To anyone thats sms'd me and not got a reply, had to format phone, lost most contacts and msgs.

Whole car being stripped, so if after anything specific, sms, or pm

^^^clearly grey as can see in pictures.

i need glove box.

stero/ashtray surround if not broken?

that case/compartment 2x below the climate control.

inbay/engine stock cooler piping 2 pipes that go to stock cooler?

all delivered to vic 3029?

ps ..can put in a big box and use e-go for delivery...

in the boot where the fuel pump cover is there should be a squarish steel cover with two bolts in it. (covers the power plug) if it is there - how much with the two bolts?

if you need an image of it I can provide one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How much have you lowered?  I had 350Z springs in the rear and was able to pull the camber into factory spec with the factory arms on the rear, obviously the front ran negative camber as it isn't adjustable, but rotating the wheels regularly evened out the wear.
    • Either the installer needs to come back, you need an auto electrician, or you need to learn automotive electricals yourself.   First step Id look at is where that big thing came out of, is there still things unplugged at that location? Maybe they just forgot to put a relay in or something?
    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
×
×
  • Create New...