Jump to content
SAU Community

Recommended Posts

the main way to tell genuine or not is where the adjuster knob is, on replicas its straight and on genuine the knob is actually recessed a little into the seat.and the metal part isnt straight its bent to suit.

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

I have asked the supplier and they said they are their photo's and they have the engraved name on the side.

I also just went and checked out some Gias and Cuga replica's here in Brisbane. The Cuga had the engraved name, the Gias did not

Not sure which supplier they came from thuo.

The proof will be in the samples I have ordered. The ones I looked at today were VERY good.

I think the Cuga will be better for daily driving over the Gias.

Can order any backing, FRP, carbon or Kevlar or glitter

i am way keen,

send me a pm of the finer details

The samples arrived today via EMS freight ($600) and all I can say is the quality and finish is VERY VERY good. Gias 2 is complete with all logos and stickers, engraved name up side etc.

Cuga has engraved logo up the side. All stiching is perfect and straight etc. I can not fault them.

I will post detailed photo's tomorrow night with NEW CHEAPER pricing, mainly the freight cost. May start a new thread as I can not edit the first post. Stay tuned.

how much do the gias seats weigh?

did u get it in carbon or FB?

could be tempted to sell my r34 gtr seats and buy a set of these

also is the price cheaper if we get more people?

dont know if i missed it but do they come with rails?

Photo attached are the sample seats I got sent over to check quality

More than happy with them, and as promised new pricing listed below

Prices are now per pair and landed in Brisbane. The only extra costs will be freight costs if you can not pick them up from my house in Brisbane. Seats will only be sold as pairs

All seats have the option of colour being logo graduation, black, red, blue

All seats have shell option of black FRP, Crabon or Kevlar

All seats come with basic rails. as pictured

Gias Low Max Recliners (The most common ones for sale elsewhere)

FRP $630pr

Glitter $650pr

Carbon $820pr

Kevlar $820pr

Gias 2 Low Max Recliners (Upgraded quick release adjustor and flip forward) Same as per sample pic with "star" shaped adjuster. FRP $650pr

Glitter $690pr

Carbon $880pr

Kevlar $880pr

CUGA or Vorga Recliners

FRP $650pr

Carbon $850pr

Kevlar $850pr

Vios III Fixed back

FRP $500pr

Glitter $550pr

Carbon $750pr

Kevlar $750pr

Zeta II Fixed back

FRP $500pr

Carbon $750pr

Kevlar $750pr

Maxis III Fixed back

FRP $500pr

Carbon $750pr

Kevlar $750pr

Tomorrow I will start a new group buy thread and get this one deleted as I can not edit the first post and has miss leading info in here etc.

post-14923-0-57214800-1307531680_thumb.jpg

post-14923-0-83835100-1307531728_thumb.jpg

post-14923-0-36861100-1307531751_thumb.jpg

post-14923-0-92249900-1307531807_thumb.jpg

post-14923-0-49514100-1307531867_thumb.jpg

post-14923-0-01847100-1307531919_thumb.jpg

post-14923-0-54874400-1307531961_thumb.jpg

post-14923-0-36261600-1307532002_thumb.jpg

post-14923-0-58787500-1307532058_thumb.jpg

post-14923-0-26146800-1307532100_thumb.jpg

Edited by darrinspencer

Also, can these seats be used with the stock seat belts, or do they need a harness? If they need a harness do the rear seats need to be removed and is a mod plate necessary?

You can use the standard seatbelt.

yeah you can but its not as nice as using a harness and you have to do a good mounting position, take care to avoid the seat belt guide as best as possible if your in a series 2, and reaching for the buckle can be annoying, if its not an everyday car then its fine...

yeah you can but its not as nice as using a harness and you have to do a good mounting position, take care to avoid the seat belt guide as best as possible if your in a series 2, and reaching for the buckle can be annoying, if its not an everyday car then its fine...

I realise it's not as nice, but I want to retain the back seats. I don't have the car yet, but I'm going for an R34. By series 2 do you mean R33? Is there a way to have a harness and keep the back seats?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...