Jump to content
SAU Community

Recommended Posts

Ok so i have an r31 with an rb20 gearbox in it, the rb20 box was rooted and clutch was faaaaarked so i went and spent all my

money on a 5 puk ceramic cutch and wicked pressure plate to help out with the power im planning on making

heres the issue I did soooo much research called jap wreckers to double check and everyone said the SR20DET gearbox was identical to the RB20DET gearbox

so all i had to do was change my current bellhousing and hey presto the car will live again...... so stupid me went out and got and SR20 gearbox.........

and people NO it was not the same..... it LOOKS pretty close but the SR20 gearbox is 40mm longer.....

so now im stuck with a driveshaft that wont fit on my 31, poor me what to do i thought looked up some more info and apparently the auto driveshaft is 40mm shorter than the manual one

all u gotta do is change the actual bit that goes into the back of the gearbox to the manual one, the yoke or sumthin like that. anyway had a look and NO WAY

the caps on the manual are smaller than the ones on the auto so the yoke thingy wont transfer over :down:

i was told my only other option was to get it cut welded and balanced, but i didnt want to do that untill i got an RB25 gearbox to match it up right away

so does anyone hav any advise? im really stuck

Link to comment
https://www.sau.com.au/forums/topic/367432-gearbox-pickle/
Share on other sites

the reason i didnt buy and rb20 is because they r way too expensive for what they are, and i want to get an rb25 box anyway the sr was just to get the car moving again.

unless u know where i can get a cheap rb20 box?

Link to comment
https://www.sau.com.au/forums/topic/367432-gearbox-pickle/#findComment-5861516
Share on other sites

Oh man, if only one of us had come across this problem just days earlier. Only 2 days ago I paid a mechanic to swap my SR20 bellhousing onto an RB20 gearbox I got cheap and only once it was bolted to the engine we found that it was 50mm shorter. What a waste of time, it's not worth getting my tailshaft lengthened so I'm shopping for an SR box instead. I drove 5 hours return to look at one today that was f**ked.

So for the search record:

CA18 and SR20 gearboxes are the same length

RB20 are shorter!

Link to comment
https://www.sau.com.au/forums/topic/367432-gearbox-pickle/#findComment-5861784
Share on other sites

well the cheapest in SA currently is 500 and for a temporary gearbox thats just way too much, call any jap wrecker in sa and they all want 6-800 depending on condition of the box

the box i really need is RB25DET which i could pick up for 1000 so paying half that amount for a box im only gonna use for like 1000km just isn't cricket

and i stress the word again TEMPORARY i dont need to keep this gearbox i just need to get around in it untill i have the 25 box and associated bits to fit it to the 31

and god id love one from SA which costs 350, seriously id go and grab it tonight to stick it in tomorow, so if u selling a RB20DET gearbox in SA for 350 send me a msg and ill grab it....seriously

Link to comment
https://www.sau.com.au/forums/topic/367432-gearbox-pickle/#findComment-5862122
Share on other sites

if you only need it temporarily why not just hang off, save that little bit extra and fork out for the 25 box?

+1

stuff pulling the gearbox out twice when you dont have to......... Just save for the 25 box if you can get one for $1000

Link to comment
https://www.sau.com.au/forums/topic/367432-gearbox-pickle/#findComment-5862273
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to it's full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so damn hot in there, that made it all the more easy to remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. I was standing there looking at the car and said 'f**k it'. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...