Jump to content
SAU Community

Recommended Posts

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

i quite enjoy leavin $70k hsv's etc for dead , not coz they are fast cars , but coz the silly bugger has spent so much money on a shitbox.

Tried racing them around a corner? Just cos they're slow in a straight line doesn't mean it's a shitbox. By that logic, a $2m McLaren F1 is a shitbox because a $20k GSXR1000 will beat it over the ¼ mile. It's a different matter of course if they think their car is the fastest thing around, or if they somehow think that you're 'below' them because you didn't spend as much money as they did. Then it's time for an arse whipping :)

Hehe yeah, the earlier model R1's weren't *that* fast in gear. At Darlington Park I dragged one off going down the back straight - niether of us could believe it, I just shrugged my shoulders and kept passing him :) Was that a 1st gear run on the bike? Most litre bikes will do over 130km/h in 1st and many also have torque limiters, so it's not until second and sometimes third that they get full power. Try it from 150 or 200 :)

Actually my brother ran a black R32 GTR on my bike, 2nd gear roll-on from about 100 to 180 the GTR was only four or five carlengths back. It shot flames on backoff too and sounded angry he reckons :)

Hrmm.. geeez.. mayb y this is some of the reason why I have had a lance n a magna tried to wipe me out.. :)

Ah well.. I dont race at all.. tho.. I did by accident once tested and confirmed that my traction control does work (ie. the slip light blink like crazy and I was not going anywhere), the ford behind me was not too impress tho.

one night travelling to surfers paradise from tweed area, we had these guys in a monaro, i wasnt driving as i had a bit to drink but even in currumbin were we were 2 or 3 cars back in traffic, he had to dump the clutch and do a burnout(for god knows why) and then all the way up, they were trying to race us.. at one set of lights we were finally matched, i told driver, dont worry about them as i cbf dealing with getting car confiscated if anything happens, anyway the drive of monaro revvs engine.. and almost stalls it(you know kangaroo hoping or whatever, its like a mili second away from stalling) , he then did the big fly by when we were sitting on speed limit 10seconds later, so we did the appropriate wanker signals to him(after about 3 or 4 times over the trip telling him were not bothering on public roads)we could stop laughing the rest of the way..

i mean seriously, i dont mind at night, on 'private roads' if asked politely(as in good nature) having a run with something.. but this whole, yoru car is shit, thing.. well i guess i missed that phase :S but whats with dickheads trying to race at every lighst after saying no already..(oh should be noted, all people in the monaro had beers in hand.. even the passenger was passing the beer to driver to take swigs )

Ok I had to add this one,

Girlfriend picked me up in the line from the station the other night...

Mr Joe Cokhead in his new M3 at the lights we take off slowly so he stabs it and reaches that rattly M3 exhaust note that seems so common yet reminds me of a $50 tip on an excel, so what happens next...

Girlfriend punches first bangs second...seeeya...

Next lights pull up on the other side of him...windows down both cars, girlfriend leans over me and says "Should let your wife drive, she couldn't do any worse..."

I am really starting to hate M3's I like the look but the fart in a tin can sounding exhaust makes me wonder how well manufactured the rest of the car is...

Ok was at Aspley with my car, and these guys were geeing me up for a run for the past 5 weeks or so and I couldn't run them because I needed to get my bigger fuel pump, because I was leaning out at around 10psi with the new turbo. Finally they come up to me again after fuel pump install and tune.

They told me that I was going upagainst a 5L VN and pointed to a black kitted VN parked no to far away. "it's got extractors, exhaust, chip, and a cam" Thats it I said? to which they replied yep.

So we cruise on out to the highway, on the way out the VN gives it a little while alongside me, and a particulsr sound grabs my attention... yes I herd that whine of a supercharger winding up. My mate herd it aswell, so we figured we were in for a decent run.

Had a run form 80 in third and he pulled 2 car lengths while i was lagging, They were all yelling and laughing shit as they tore away form me. Caught up and had a run from 100. different story, they pulled half a car length, then i came onto boost and pulled past them changing into 4th.

On the way back down the freeway raced from 2nd at about 20. He broke traction hardcore but still pulled 2 car lengths wheelspinning away from me as I was lagging then I hit boost broke traction, hooked up again at top of second, hit third spun till about 120, hooked up and once again passed them changing into 4th. Was a lot of good clean fun.

Not having to worry about wheelspin!? You try moving forward with an open diff on the pan!

You've beaten me on the skidpan in the past Marc.

You bake biscuits. An Air biscuit is a fart. I actually got that out of Cleo or something. Also obtained another good definition from there.

Wanking Spanners, noun; hands.

2 of my favourites from a chicks mag, they are turning dirty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...