Jump to content
SAU Community

Recommended Posts

before pulling the starter motor out:

Check your battery voltage, both just sitting with everything off (Should be about 12.6V or so) and then during cranking (shouldnt drop below 9v from memory, even 9v I think is getting to low)

if this checks out, put the car in gear and roll it back or forward a bit (the gear for the starter might be jammed against the ring gear.

But if this fails then I'd say it would be the starter motor as suggested

sounds like mine when my battery dead, the battery got not enough power to start the car. If jump is working then your car can still use the battery for a few days/weeks?

Jump means you taking other's car battery power to start your car and then you still use your underpower battery, the car do charge the battery but it won't last long anymore. It will die soon so replace the battery asap.

sounds like mine when my battery dead, the battery got not enough power to start the car. If jump is working then your car can still use the battery for a few days/weeks?

Jump means you taking other's car battery power to start your car and then you still use your underpower battery, the car do charge the battery but it won't last long anymore. It will die soon so replace the battery asap.

Not true, my battery has gone flat about 3 times in the last year and is still fine.

Only a cheap compliance battery as well....

Not true, my battery has gone flat about 3 times in the last year and is still fine.

Only a cheap compliance battery as well....

yeah same..get a proper (plug in the wall) battery charger, bunnings has them cheaper than auto stores, I got a fairly decent one with an engine start option on it as well for about 60-80$..

my battery has gone flat numerous times..but after a good overnight charge its good as new..

If battery keeps dying, won't it be an alternator problem?..

Or is it because of the cold weather? I know that short drives + loud music w/ sub can drain the battery before the alternator can charge it

If battery keeps dying, won't it be an alternator problem?..

Or is it because of the cold weather? I know that short drives + loud music w/ sub can drain the battery before the alternator can charge it

Ohhhhhhhhhhhhhh, maybe that's what happened to me!!! i had pretty good sound system and maybe the battery went flat before the alternator charge it!! That is why the battery keep going flat and die. And short drive yes :(

Or is it because of the cold weather? I know that short drives + loud music w/ sub can drain the battery before the alternator can charge it

That makes perfect sense, I recently moved within 15mins of my work and only drive the car there & back at night.. with the sub going nuts lol..

You need to check that you don't have a drain somewhere in my car. My old car had a dodgy earth and the glovebox light was shorting to ground (not through the switch) and staying on

This over night was draining the battery

Simple check I guess you could do to eliminate a failing battery is unplug it (negative first) and leave the car sit over night and plug the battery back in. If all is well then it's a problem with the wiring. If not it could be your alternator or your battery

You need to check that you don't have a drain somewhere in my car. My old car had a dodgy earth and the glovebox light was shorting to ground (not through the switch) and staying on

This over night was draining the battery

Simple check I guess you could do to eliminate a failing battery is unplug it (negative first) and leave the car sit over night and plug the battery back in. If all is well then it's a problem with the wiring. If not it could be your alternator or your battery

RAA guy who came out to jump my car last night noticed my boot light wasn't turning off when closing the boot. We couldnt find the switch so thought it must have been in the lock.

Anyway, pulled the globe out yesterday and guess what? Car started first go tonight ^_^

Edited by awsam

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...