Jump to content
SAU Community

Recommended Posts

I can never get my box into 1st gear >20kmh unless I force it, or I double clutch. At first I thought my box was rooted, but I find that almost any car with any decent ks on it behaves exactly the same!

ugh.gifugh.gifugh.gif

A good oil change with Castrol VMX 80 will help things.

Not as much as learning how to drive properly hsugh.gif

seriously people how dumb do you have to be not to realise that you shouldnt hardly ever gear down into first gear while approaching anything, whats wrong with keeping it in second gear ar 20kph, so you dont have the power of first for about 2 seconds, but who cares, trust me no oil is going to help you in this case, maybe a few more lessons on manual driving, or buy an auto.

Just put the lightweight shock proof redline oil in your hairy box and you can select any gear you like at any time of the day. Some of the best money you will spend on your baby. Order online at www.relineoil.com.au

You need this much for GTR, dunno about GTS

Gearbox -- 4.1 L

Transfer case -- 1.8 L

Rear diff -- 1.5 L

Front diff -- 1.0 L

thats funny you all say that, coz i get into 1st quite smoothly < 15km/h if I double clutch and rev match... it almost goes in itself.... (if u need to know why, think about coming to an uphill intersection, and just as you're about to stop, the lights go green)

I haven't really tried anything over that, coz like most ppl say, u dont really need to....

But as a general rule of thumb, if it struggles to get into first gear while moving, then dont!

Zahos: Well obviously, because that's what double de-clutching achieves, but all these people aren't doing that, and are just trying to force it into 1st gear.

Also, that scenario falls into the 0.05% of times when you'll need to put it into 1st gear whilst moving. 99.95% of the time, you should never have to put it into 1st gear whilst moving.

Guilty - don't feel stupid - chances are if your friends won't teach/tell you they probbaly don't know what it is..

Tip: Do a google search :)

Taken from:

http://www.triumphspitfire.com/healtoe.html

Double Clutching

First of all let's deal with the "double declutching " issue. This is really only the British term for 'double clutching' and makes reference in some way I suppose, to the fact that it is usually a downshifting maneuver in disengaging the clutch. The first stage in a full 'heel and toe' gear change is the simple use of double clutching. On its own this is a fairly simple little dance of the toes and it goes like this:

1. You are driving along in your TR, MG or whatever in third gear for example, approaching a corner and preparing to shift to second. You brake with the left edge of the ball of your right foot as usual.

2. Depressing the clutch with your left foot the shift lever passes through neutral as this happens you release the clutch pedal out again half way, thus setting the mechanics of the clutch assembly in motion again.

3. Then fully depress the clutch to complete your shift into second.

That my friends is a double declutching. It might sound odd in print but is quite simple in action. Practice it in the driveway, with the engine off so you don't hit anything. The aim is to keep the engine and the clutch plates turning at the same speed for the moment when they engage themselves. Your car will thank you especially if you have an older vehicle that lacks effective synchromesh.

I learnt to drive on my Dad's old 60's Alpha and the syncro on 2nd was so bad you have to double clutch in and out of that gear... with no power steering, peddles stupidly close together and an accelerator that only moves about two cm and its on the floor...

it was a tough learning machine... but fun and sounded great...

Skyline gearboxes won't let you select 1st while moving just like it won't let you select REVERSE... there idiot proof... (unless you are the kind of idiot who just forces it anyway)

thanks very much for the flames....

rather then stopping at busy roundabouts i usually try to keep a slight crawl on the car, otherwise i'll never get in when chance arises, so i hardly come to a complete stop..

ad i haven't been forcing it...has happened twice (crunches) so now i just leave it with slight pressure until i drops in itself, i may try the ouble clutch method - but this is not a everyday driving thing...just a few intersections up here that are always busy etc.

thanks very much for the flames....

rather then stopping at busy roundabouts i usually try to keep a slight crawl on the car, otherwise i'll never get in when chance arises, so i hardly come to a complete stop..

ad i haven't been forcing it...has happened twice (crunches) so now i just leave it  with slight pressure until i drops in itself, i may try the ouble clutch method - but this is not a everyday driving thing...just a few intersections up here that are always busy etc.

Okay, that's a valid time to be putting it back into 1st whilst moving...

Just make sure you're going *really* slow, like at a crawling pace, and double clutch it, and you should have no worries!

gatty, as everyone else is saying u shouldn't be shifting into 1st unless ur stopping. not sure what speed ur going at, but it usually helps to shift to 2nd and then wen ur nearly at a stop push it in first. most cars have this point where 1st will easily slide in going at a certain slow speed, eg. for me wen the car is just about to stop and its still rolling i find that it will just slide into first easily.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
    • Being a manual, we very quickly ordered new R34 gearbox (From Nissan) and remaining parts from Kudos motorsports. Would highly recommend the team there. Ultra helpful and quick to share advice and upgrades. We are in the middle of taking the Auto out (Genuine 94,000/kms) and putting the Manual in this weekend. Part 2 of the build will include likely a Plazaman Intercooler and Plenium, Hks Exhaust with Tomei Dump (ordered).
×
×
  • Create New...