Black R33 Gts-T Street/track Project

[johnbarry88]

started putting things back together tonight. Also started making up my catch can base plate too..

[mattis96]

can you post up a picture of how you've mounted the power steering resevoir please

[johnbarry88]

Will do just in the process of making a new bracket for it now

[johnbarry88]

just a quick update guys.

made/installed:

greddy oil temp

greddy oil pressure

fitted EL guages but found out the the rev gauge was for a gtr so I couldnt put it in still looks good.

fuel pump switch

ingnition switch

blocked off bov

made power steer resivoir bracket

dropped one of my new greddy gauges when I was making the plate and put a dent in it but still works

[Cro_boy_Mario]

what fittings did you use on the covers? -12?

[Weapon]

From memory I think they are -10???? i may be wrong though as I fitted speedflow etc for my breathers but that was a fair while ago now

[johnbarry88]

yeah there dash 10's

[Cro_boy_Mario]

So speedflow sells the fitting to put into the covers?

[TiTAN]

So speedflow sells the fitting to put into the covers?

no the old ones are cut off/removed and the new ones welded on.

[johnbarry88]

above is correct pulled them out and had them welded on..

[r33_racer]

Car looks sweet mate. That is good power for an rb25 too!

[johnbarry88]

yeah the power figure was made on a hub dyno with 2deg of timing put in, made 451rwhp 23psi on the same dyno without the timing. Chucked it on the dyno at powercruise and made 440rwhp so thats a power figure loss of 2.5% from hub to roller. Looking at cams injectors and e85

[FineLine]

Car looks sweet mate. That is good power for an rb25 too!

It goes like shit off a shovel too Mike, We had a ball beatin up the boges in it at power cruise.

[r33_racer]

Nice! Thats what I like to hear!

[johnbarry88]

It goes like shit off a shovel too Mike, We had a ball beatin up the boges in it at power cruise.

we sure did even smoked gups lambo on sunday morning

[johnbarry88]

hey guys little update. just got my hands on a piar of 19x9 +13 vs-kf's for the front and in the process of finding some 19x10 +18 ish for the rears Mind you this is just for the street

[FineLine]

Cockfloppa

[johnbarry88]

You're just jealous

[johnbarry88]

got the wheels home and a set of re55's

[johnbarry88]

hey guys little update just fitted a gtr cooler that I swapped for my a.r.e as the end tank were straight and the bar would fit unless I chopped the shit out of it. Also fitted my gtr front bar, series 3 lip should turn up next week sometime and then ill fit my oil cooler