Jump to content
SAU Community

Recommended Posts

Don't use cheap parts on your car. I have first hand experience when the [cheap] front pads on my car died very quickly, resulting in the piston coming out of the calliper as I was thrashing around Oran Park late last year.

I converted the front brakes to R33 4 pots that afternoon in the car park :P. (For those that went, White/grey R31 Skyline, used a hammer to create clearance for the discs hehehe).

I remember this day clearly, and can vouch for the condition of the brake pads on Ravi's car: they were literally bent like bananas, and that's NOT an exaggeration! I might even have a photo somewhere, I was that stunned at what I'd seen. I used to spend plenty of my youth helping my old man when he worked on cars, and I have NEVER seen brake pads in that shape.

  • 3 weeks later...

I want to drift. After reading, watching videos, looking around etc, it looks like great fun. Ive seen a couple drift mob cars(180 and a silver r33) parked near my work. Hopefully I can see the guys who own the cars and talk with them. I find it quite gay though that shit like this cost so much money. There should be some free tuition day. Anyhow, for now Ill be watching more japanese basic drifting videos. They are not bad at all, they show camera in car and out of the car so you can see what different situations do with the car. Most of the videos are skylines too, so I can relate! Would be awesome of work would let me use the car park for drifting haha.

Umm It is almost free to try this sort of event. We are running a 'khana on the skidpan in Nirimba in 3 weeks, entry cost is $50 if you were a SAU NSW club member....ie it will cost more in fuel and tyres than it will in entry fee!

Most motorsport is not cheap....but we actively try and create some events that are as cheap as possible. Come along and give it a go.

Well drifting is all about learning the balance and power control (e.g. powersliding) of your car. Texi is a good place to start and there are a few guys that can pretty much drift our texi courses (James in his black and yellow R31 for instance).

Come to a texi in your car then do a drift school day. Then there are a number of drift night events at eastern creek running - watch our event section.

That'll be my suggesting if you really want to learn drifting in a safe controlled environment.

I remember this day clearly, and can vouch for the condition of the brake pads on Ravi's car: they were literally bent like bananas, and that's NOT an exaggeration! I might even have a photo somewhere, I was that stunned at what I'd seen. I used to spend plenty of my youth helping my old man when he worked on cars, and I have NEVER seen brake pads in that shape.

I found your pictures in the trackday thread over at R31SC

IMG_4686.jpg

IMG_4687.jpg

IMG_4688.jpg

<1,000km old, 1.25 track days later

Don't use cheap parts :)

hey mate i was teaching with driving sports out at EC for drift they have days running from only a few hundred dollars and that is with all cars tyres and fuel supplied which is a great place to learn and is quite cheap when you work out what the cars cost to set up maintain and have running.

if you want to give it a go pm me and i can get you some infomation sent out about the training day, drift is not a cheap sport, it is quite cost effective if you are going the wet pan as you dont wear anything out but if you go in the dry tyres can add up quite quickly.

last time i was on the dry penut i did 10 tyres in my r 33 in 4 hours and around 12 tyres on the big track over the course of a few hours (depends what tyres you run as well).

there are many good drift schools that you can go to and Driving Sports is just one if this intrest you please pm me for more details.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...