Jump to content
SAU Community

Recommended Posts

Hello guys ! i was thinking about upgrading my ancient set of tools ( i have been using the one's since my old man had since 20 lol ! )

I need a suggestion of what brands are decent and good in price ?

I was looking at a stanley socket tool set ? 132 piece for about $200

what do you boys use ?

Edited by Longz
Link to comment
https://www.sau.com.au/forums/topic/372445-buying-a-new-set-of-tools/
Share on other sites

just a tool set for any type of mechanical \ house work thought it was about time i bought my own set.

Well my dad's ones are old bit dirty and starting to rust a bit.... and they look like stone age tools compared to nowadays when i saw my mates ones.

Edited by Longz

just a tool set for any type of mechanical \ house work thought it was about time i bought my own set.

Well my dad's ones are old bit dirty and starting to rust a bit.... and they look like stone age tools compared to nowadays when i saw my mates ones.

Oh I thought you meant like a full mechanics tool kit.

I've got an SP tools chest at work, most of the newer Snap on sheet doesn't seem all that much better than any other half decent brand.

I bought a couple of new tooly things a few months ago.

Firstly I bought a Bahco 106 Piece Socket Set. Really pleased with the quality of the tools. Got it from Bunnings for $240. I've used Bahco stuff for work (rigging), and have always been happy with the quality of their tools.

About 5 minutes later I bought a Bahco Metric Reversible Ratchet Spanner Set. Such a tasy little cluster of toolness! All in a groovy pouch. Super happy with these, use them all the time on my car, and at work. The 5° action of the ratchets means you need sweet FA room to move them for them to work. Great stuff! Got these from Bunnings aswell for $74.

Bahco was the only brand on sale there that didn't have a lifetime warranty. They also had Kinchrome and Stanley. If it's just around the home I guess you could settle for Stanley. But wouldn't you want your kids to be replacing their old mans tool kit in 30 years time? lol

Nothing wrong with Bahco.....

Sidchrome - dear as but one of the best you can get

Kinchrome - very good, but buy their premium range cos they also sell cheaper versions sometimes

Snap On - I don't own any, but supposed to be good

Dowidat - german excellence, not quite as common as it used to be, but a top brand

Blackhawk - make the best small spanner set you can find [as in little spanners]

VBW - make good stuff. usually extractors or stud removers

Eastwing - are the best claw hammers

Wiss - tinsnips/cutters

Dawn - vices

Visegrip - visegrips although theres another brand with blue covered handles that I've got that is also good [name escapes me for now]

Maun - best hole punch sets

Masterfix - the best rivnut set

and the list goes on...........

There are others, but you get what you pay for.

I have a Repco tool set for my work vehicle [supplied] and it seems OK - but I probably wouldn't buy one personally - the other brands listed do the same job and I trust them.

You need to buy good tools Longz, I don't want any rounded off nuts or broken studs on that R34 of yours...........when I win the lottery [and don't spend so much on tools] I'm buying it!!!!

Snap-on or Blupoint or even Westrac branded tools IF you are using the tools all day every day and could get away with using them as a tax right off. if not I love the good old medium range Sidchrome gear. 1 thing that I highly suggest is a decent quality impact socket set. in 6 not 12 point.

PS if you want some really good gear and don't wanna pay aussy prices or have access to freight coming out of Singapore. I highly recommend Promax USA tools, if people want the addy to the supplier I'll add it later. The impact gear works out atleast half the price of buying in Perth depending on if I airfreight or seafreight them.

But might not be worthwhile to most people unless your buying big sockets in like 3/4" to 2 1/2" drive gear like I do for my work.

any tool that comes with a lifetime warranty is usually good.

But whose lifetime? If the tool breaks, wouldn't that be the end of its lifetime?

Like a "concrete warranty" - once its off my concrete, what warranty?

Bunnings has a Supatool kit, 159 pieces in 5-tray cantilever tool box - only $89. And get a Stanley screwdriver box - 16 pc at Bunnings $34.

I bent the f**k out of a sidchrome 3/16" whitworth spanner. Was hanging off it with a peice of steel tube about a yard long. I went to my local agent and they replaced it no questions asked. And it was 10 years old.

But whose lifetime? If the tool breaks, wouldn't that be the end of its lifetime?

Like a "concrete warranty" - once its off my concrete, what warranty?

Bunnings has a Supatool kit, 159 pieces in 5-tray cantilever tool box - only $89. And get a Stanley screwdriver box - 16 pc at Bunnings $34.

by lifetime warranty they mean for the life of the company (that made the tool) thay will replace/ fix the tool if it's broken.

so it's best to buy you tools from a long running company because they have a better chance of being around in the future, but if your not using the tools every day go with the tools that feel good because they will last as long as you will be using them but will probably cost less.

Snap on is good gear but unless you use it for work (ie you're a fitter / mechanic) it's major overkill. Any home handyman or enthusiast who tells you otherwise is just trying to be cool, and doesn't know what he's talking about.

For the amount of use a tool set will get with a typical car enthusiast, Sidchrome or other mid-range gear (as per a few of the brands listed above) will do the job fine. My socket set is 25 years old and still going strong. It's scratched up and dirty, but everything works well. Stanley gear is fine as well - I have a screwdriver set (25 years old) and ROE spanner set and again it hasn't let me down (except when I snapped the blade off one screw driver trying to use it as a lever).

Stay away from the cheap and nasty supercheap gear and you should be OK. The only tools I've ever broken without ridiculous abuse is the cheapo stuff. Even the Repco gear surprised me with its quality. I wanted a small 1/4" drive socket set for the tight fiddly jobs that the 1/2" gear couldn't quite fit, and the Repco set is surprisingly good quality. I use it a lot more than I had intended, although it's only 12 months old so can't vouch for its longevity.

Repco brand, Kinchrome or Supatool.

I assume this is a shed set and not a set you'll be using for hours a day.

Forget Snap On and Sidchrome. Far too expensive for tools not being used constantly. Kinchrome are bloody good quality and will last decades. Repco brand tools are also very, very good. Supatool are just rebranded Kinchrome stuff and very good quality.

I don't know about the Stanley stuff. I've never used it and don't know anyone who has. It seems a little too cheap to be a contender. The link you put up to the Stanley stuff, it doesn't look great and the price says no IMO.

That Sidchrome set looks bloody good.

There's a 174 piece Supatool set on special at the moment from Kinchrome for $299 - http://www.kincrome.com.au/web/support/promotions.php Have a look at the cattledog.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...