Jump to content
SAU Community

Recommended Posts

How about any time your standard AFM maxxes out? Which is about (or a bit more than) 300 engine HP. You can go past the AFM max out point, but if you want to retain the ability to control the mapping, it's worth upgrading.

this, although its more like 300rwhp (varies from car to car obviously) than 300bhp

Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5950382
Share on other sites

Thanks guys,

actually I am not sure what sticker is even on mine. might have to duck outside and have a gander.

Anyway i was aiming around the 250-280rwkw with Hyypergears ATR43 SS1.5 so i guess i will need one. Just out of interest are the the same physical specs as a stock gtst one as in would the mounting holes match up to the standard airbox. I need everything to look as much as standard as possible....

Ps: I forgot to ask, has anyone seen the aftermaket z32's on ebay (brand new)? any thoughts...

for example.......

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=110559548059&ssPageName=STRK:MEWAX:IT

Regards,

Dazza

Edited by itshimdazza
Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5950440
Share on other sites

hello

ECR33 AFM is 80mm and maxes around 220rwkw ish, some can do more, some less, but they all peak 5v around this level

VG30 AFM (or Z32 we call it) is 80mm and maxes around 400rwkw ish, some can do more, some less, but they all peak 5v around this level

both are a direct swap for the physical diameter and adapters but the wiring is different

ECR33 S2 is pink label 3 wire and VG30 is orange label 4 wire (extra ground wire)

Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5950453
Share on other sites

there are also Z32 (really VG30 AFM's) fake on ebay so do not BUY fake ones

a legit Z32 brand new costs $350 ball park and comes in an orange BOSCH box

look at the pics of this page for a fake Z32

http://paulr33.com/techinfo/snipit.html

also Ive never seen "green" plastic based Z32s like that EBAY url you posted, they are knock offs or fakes or copies or shitters

Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5950454
Share on other sites

cheers Paul, thanks for the heads up...

I often wonder about ebay copies and I would love to know what the green maxes out on though. would be an interested experiment

has any members bought something like this "a fake" and got some real testing from it like what was on Pauls URL above with maxe rekw & voltages?

Dazza

Edited by itshimdazza
Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5950500
Share on other sites

That specific ebay one isnt a Z32...

It's a dead give away with how the ad is worded. Notice how it says "aftermarket Z32", as in - not original. No where does he say it is OEM/Genuine etc. The last line of his ad says "check other listing for genuine"

That's so he can cover his ass when you realise you've purchased a paper weight :)

His genuine ones are selling for $320 or there abouts.

Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5950507
Share on other sites

that link states its an aftermarket replacement and to check his other listings for genuine stuff so theres nothing dodgy going on there.

alot of the older fake z32s worked fine in every way, they just maxxed out at much lower power levels than genuine ones.

if you end up getting one a cheap solution for the plug is to get a rb30 afm plug as they're the same.

Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5950517
Share on other sites

Pfff do not be telling people that fake Z32 AFMs are any good. They are not.

We are talking about a extremely sensitive and critical component of the fuel system here... "she'll be right" doesn't cut it!

It's not just about "peak power" there are many other factors at play here not least of which is consistency & reliability

Of course if it's just for your fully sik drift car with lots of go-fast stickers on the side then go for it! :D

that link states its an aftermarket replacement and to check his other listings for genuine stuff so theres nothing dodgy going on there.

alot of the older fake z32s worked fine in every way, they just maxxed out at much lower power levels than genuine ones.

if you end up getting one a cheap solution for the plug is to get a rb30 afm plug as they're the same.

Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5951085
Share on other sites

agree the AFM is not something that should be mucked around with

its one of the key sensors the engine uses for engine management

why do you think it rev caps at 2500rpm as a failsafe when the AFM is mangled, failed or unplugged

cos its not safe to run with a mangled one or non-working one

Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5951234
Share on other sites

Chinese copy Z32 AFMs are an absolute pain. They don't measure anything like the genuine item and will cost more in tuning time than what its worth

Nistune Z32 AFM forums link

Declan from Garage 7 shows on his website the internal differences of the Z32 AFM copy and changes in mapping here

Garage 7 link

Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5952453
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...