Jump to content
SAU Community

Recommended Posts

Hi all,

Ive been searching for more power from my r33 with basic mods such as 3” exhaust, fmic, pod etc. My Tuner has recommended the ViPEC ECU with a tune plus the needed upgrade of a new fuel pump which is old and warn. Plus a boost increase from 0.7bar – 0.9bar.

The quote was for around 3.5k I just want more power out of my car, I know im not going to go get bigger injectors or a bigger turbo is this really worth it – will I notice? Is it reliable? What kind of power will I expect (kw/HP)?

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/
Share on other sites

Hi all,

Ive been searching for more power from my r33 with basic mods such as 3" exhaust, fmic, pod etc. My Tuner has recommended the ViPEC ECU with a tune plus the needed upgrade of a new fuel pump which is old and warn. Plus a boost increase from 0.7bar – 0.9bar.

The quote was for around 3.5k I just want more power out of my car, I know im not going to go get bigger injectors or a bigger turbo is this really worth it – will I notice? Is it reliable? What kind of power will I expect (kw/HP)?

Is that including the ViPEC and the fuel pump? If so, that's not a bad price. You might be able to go a bit cheaper if you sourced the parts from elsewhere. Or you could try to find a secondhand Power FC from somewhere, but I've always preferred to use whatever ECU my tuner recommends.

You will notice a difference though, it's definitely worth it.

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5961454
Share on other sites

Is that including the ViPEC and the fuel pump? If so, that's not a bad price. You might be able to go a bit cheaper if you sourced the parts from elsewhere. Or you could try to find a secondhand Power FC from somewhere, but I've always preferred to use whatever ECU my tuner recommends.

You will notice a difference though, it's definitely worth it.

Yeah mate that price is every thing fuel pump, ecu, tune & installation.

But before i shell out 3.5k i just wanted to know will the power be noticeable enough to justify the price/ make me a happy man haha

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5961479
Share on other sites

Well that depends on your expectations.

My ECU is still one of my favourite mods that I've done to my car, simply because of the difference it made to driveablity and my fuel economy. It may not give you another 100rwhp, but it gives you a bit more (especially if you're increasing the boost a bit) and it makes what you already have feel a lot better to drive.

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5961519
Share on other sites

If you arent going to be upgrading the turbo/injectors in the future, i wouldnt bother spending all that money just for the sake of a few rwkw and a better top end curve. On the other hand the vipec v44 is a good ecu and has some cool racing features (anti lag, launch control, flat shift).

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5961588
Share on other sites

Great Ecu (LINK G4 as its also known by the original manufacturer) it will allow scope for any mods in the future, if your not going all out it would be a wiser investment to buy a PFC as you will save about 1500 yet make the same power and have the same driveability.

Even the new adaptronic plug in select ecu would be a good investment for basic mods.

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5961606
Share on other sites

As you have a Neo engine you could get a Nistune chip and get much the same results. You will not really get the benefits of the Vipec over the Nistune if you are not planning to upgrade the turbo etc. You should probably still get a new fuel pump as an insurance against failure.

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5961633
Share on other sites

As you have a Neo engine you could get a Nistune chip and get much the same results. You will not really get the benefits of the Vipec over the Nistune if you are not planning to upgrade the turbo etc. You should probably still get a new fuel pump as an insurance against failure.

When did he say he has a Neo engine????

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5961922
Share on other sites

As you have a Neo engine you could get a Nistune chip and get much the same results. You will not really get the benefits of the Vipec over the Nistune if you are not planning to upgrade the turbo etc. You should probably still get a new fuel pump as an insurance against failure.

r33 non neo.

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5962001
Share on other sites

you can pick up a Second hand PFC for around 1000$..but before you do anything just replace your fuel pump (and filter if its old) and maybe get your injectors cleaned, this alone can make a huge difference, especially if your old ones are shagged..

Unless you got money to burn I wouldnt bother with that Vipec mate

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5962270
Share on other sites

I disagree.. Go an pay to get the vipec and the fuel pump... Dont go half assed about shit an get a nistune, Pfc, safc etc... Vipec is one of the best ecu's on the market..

Because in the end you end up wanting more, then you'll start changing this, then changing that.. Take my advice an buy the vipec ecu, you cant go wrong...

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5962291
Share on other sites

did the quote come with a price break-down? ie, what the ecu component is worth?

you might find getting a Link G4 from NZ is cheaper than the aussie G4

but definitely have a look in the for sale section for second hand PFC's

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5962393
Share on other sites

Sorry must have dreamed the bit about the GTT

Still think Nistune with an appropriate ecu swap is the best value for the OP but Link from NZ is NZ$1895 so even with a temp sensor and postage it will be well under $2K

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5962552
Share on other sites

did the quote come with a price break-down? ie, what the ecu component is worth?

you might find getting a Link G4 from NZ is cheaper than the aussie G4

but definitely have a look in the for sale section for second hand PFC's

Yes it did the vipec ecu was quoted at $1800.

how many hours is the car usually on the dyno for ive been quoted 6 hours? does that sound about right ive never had a tune before.

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5962850
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...