Jump to content
SAU Community

Recommended Posts

Hi Guys,

Craved Coatings has done an awesome job with my cam covers but i want to use some decent Allen key style bolts or something to dress up the engine bay a little bit as the factory bolts look like crap, tried the old :google: and had no luck, there is companies offshore doing them but not the exact ones i am after... I downloaded this as an example -

post-47580-0-92281200-1313109870_thumb.jpg

These are the Cam Covers after Chris worked his magic -

post-47580-0-20443900-1313110186_thumb.jpg

If someone can steer me in the right direction it would be appreciated :cool:

Link to comment
https://www.sau.com.au/forums/topic/373780-r34-gtt-cam-cover-bolts/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Yeah true, was hoping for a lazy solution though as I don't know where one is and also work generally prevents me from looking Mon-Fri etc...

I need to get some of these as well... and I love going to the bolt shop... They may even have a replacement for the rubber grommets (something similar atleast), you never know...

I'll let you know how I go if ya want...

I'm replacing heaps of fasteners through my car with gear from this company..

http://www.pro-bolt.com/

Group buy on some bolts (Allen key style) in various colours? :)

Not sure if anywhere in Aus does colored bolts like this?

Some very nice gear there :)

Yeah the actual catalogue has some great gear in it

This 34 has had the pro-bolt treatment

http://www.japo-motorsport.de/motorsport/r34-gtr.html

This is another company that do similar gear and you can buy kit for each GTR model..

http://www.dressupbo...om/applications

This 34 has had the pro-bolt treatment

M6 x 30mm (or 25 cant remember)hex bolts for the cam covers and m5 x 15mm for the coil pack cover, cost me I think about 20 bux all up.

Just use a washer (Ill have a look in the shed at what size I used) to fill the hole in the coil cover and on the cam covers I just inverted the rubber grommet thingys so the washer partwas on top and added another underneath, otherwise the hex bolt will chew into the rubber.

IMG_1881.jpg

IMG_1882.jpg

I havent got my new coil cover back from Chris yet but it will be the samw deal with the M5's

EDIT: just went and checked the coil cover, m6 as well, not m5

Thanks Dave, that's the sort of info i was looking for :thumbsup: Now i just gotta find a bloody bolt shop locally...

Dude give Bunnings a try, just make sure you get the stainless or high tensile ones and you'll be set. Just double checked the lengths, definately 25mm for the cam covers. You can also use them for the CAS as well if you want.

Oh yeh and I used a 1/4" flat washer (stainless).

Fwiw you can use m8 x15 or 20 for the fuel rail too and I can't remember the size for the tb, work out what ones you want to replace, flick me a pm and I'll get you pics of the packs so you can go and grab them all. I'm trying to convert all the bolts to hex type........just to annoy my tuner lol

Dude give Bunnings a try, just make sure you get the stainless or high tensile ones and you'll be set. Just double checked the lengths, definately 25mm for the cam covers. You can also use them for the CAS as well if you want.

Oh yeh and I used a 1/4" flat washer (stainless).

Fwiw you can use m8 x15 or 20 for the fuel rail too and I can't remember the size for the tb, work out what ones you want to replace, flick me a pm and I'll get you pics of the packs so you can go and grab them all. I'm trying to convert all the bolts to hex type........just to annoy my tuner lol

Hahaha well Plazmaman are already the upgraded type and the HKS rail came with the too so i am pretty much sorted there... I've gotta go to Bunnings on Sat morning so ill suss it out... I need too get this sorted on the weekend hopefully so i can get the car to a tuner....

I got all mine from bunnings so you can definetely get what you want there.

I didn't realise you were actually asking what size they were, I could have told you they were M6 straight up.

Yeah, size was one thing but more so who was using where and what options are available... I am happy to stick with bunnings as its easy and should look good :thumbsup:

Jeebuz Matt is yours ready for tuning already?

Man Ive gotta pull my finger out and get mine finished :(

Its not ready...no...

But if i book it in ill have no excuse not to MAKE it ready... That's my plan anyhow :happy: Who is doing yours?

I'm building it, chris is coating everything (as you already know) and helping me out with the fabrication side of things cause I can't weld to save me life.

Yavuz at Unigroup is my tuner.

Just started a new job and have been catching the bus, which is shitting me so I've gotta get it going as it's now my daily.........dam it!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...