Jump to content
SAU Community

Recommended Posts

They are slow. Turbo skylines which are stock as a rock are also quite slow but still not bad for a small turbo motor. There aren't much for the price you can get which are quicker. A slightly boosted turbo skyline with the basic mods(exhaust and probably cooler) is faster than a BMW M3. I had about 180rwkw when I was stock and I managed to get ahead and infront of the M3 bmw V8. Just enjoy the car.

When you are able to get a turbo, you will love it. A skyline with greater than or equal to 200rwkw is a very fun, nice, powerful and fast car.

Love the video above, not many 2.0NA motors can do that!

Naah, or he really wasn't trying..

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Naah, or he really wasn't trying..

He was screaming his ear off, my mum was in the car hitting me to slow down. Happened. True story. My old skyline which made 225rwkw would absolutely tear them in half.

Only a GTST, and those I6 M3's are better than the V8's. Doesn't take much more than a little boost to be quicker than them. Top end they have it with their larger displacement motor but down low, we got bigger torque and enough power to get infront.

Edited by SargeRX8

hmm well when i call a car a boat i refer to the sway it has when cornering and the poor cornering performance, from what i have herd the R33 has this issue stock but can be fixed with suspension n other goodies.

I just sold my R31. Shortly after I test drove an n/a 33 and it handled terribly compared to my 31, and it was also slower (and lacking in the torque).. n/a 33 would have to be the worst n/a skyline you can get in terms of performance, so yes your car is a boat, and yes, your friends 04 camry will obliterate it if you guys have a full heckers mad dog street race..

My boat has whiteline sway bar, bilsteins with king spring, and front and rear strut bracing, it handles great, has a slight touch of understeer mid corner which can be fixed by the accelerator pedal

He was screaming his ear off, my mum was in the car hitting me to slow down. Happened. True story. My old skyline which made 225rwkw would absolutely tear them in half.

Only a GTST, and those I6 M3's are better than the V8's. Doesn't take much more than a little boost to be quicker than them. Top end they have it with their larger displacement motor but down low, we got bigger torque and enough power to get infront.

M3 Evo ~320 at fly, mine made 255rwhp.

You say 180rwkw ~ 241rwhp? When stock? Lies. Stock ones would make about 180rwhp...

In any case, V8 M3 is 414hp @ fly ~ 350rwhp.. no chance especially in a straight line... (Source)

at the end of the day, in non turbocharged form the RB is a moderate revving, small displacement, low static compression ratio engine in a moderately heavy car.

They were never going to be bastions of warp like acceleration, but that's ok it's not what they were built for.

If its one of the newer camry's it would chop your NA R33 lol.

Lol that it would. Refer to the other R33/R34 NA Gutless thread.

How slow is the 0 - 100km/h for a N/A R33? They got to be dam slow to be slower than your granny Camry...

My mum's 02 model takes 10.4 seconds for 0 - 100km/h & it is the 'slightly' more powerful V6 version.

So I can't see how the current ones would be better, since they are all 2.4 4 cyls now & are heavier with each generation with all the extra electronic & safety crap added. If anything one of the older models with a 5 speed manual would probably be the fastest one out of the bunch. This was the case with the Corolla my dad bought (06 model) which was slower in the acceleration department compared to the last gen, due to the fact that it has gain extra weight (for extra safety stuff) without much increase in engine power/torque.

Out of all your typical boring sedans (Accord, Mazda 6, 6 cyl falcodores etc etc) I find the Camry has one of the worest 0 - 100km/h time. Only thing slower on top of my head is the Great Wall X240 (which is not a sedan) which clocks in at 20 seconds :rofl2:

Edited by Mayuri Krab

na skylines are weird.

the 33 i had felt slow and sluggish where as my 34 isnt too bad for an na, drove my friends 25gt and my car was much much faster. maybe slash your friends tyres, or undo his wheel nuts

im joking about the wheel nuts and tyres.

na skylines are weird.

the 33 i had felt slow and sluggish where as my 34 isnt too bad for an na, drove my friends 25gt and my car was much much faster. maybe slash your friends tyres, or undo his wheel nuts

im joking about the wheel nuts and tyres.

That's because the R34 has infinately variable valve timing (intake only) and a variable length intake manifold.

Therefore a much better torque spread across the RPM range.

but why is my r34 so different to my friends :mellow:

Few possibilities.

- Possibly his variable length intake actuature (it actually looks like an actuator for a turbo) could be faulty. it's located on the middle section of the "Y" pipe - vacum leak will cause the actuator to stop working or work intermittently, causing sluggish low end performance.

- Any vacum leak

- Dirty air filter.

- Dirty AFM

- 02 sensor could be getting too old

- Poor quality fuel

- Timing out

- Auto trans slippage

- His car may have done higher KM's

- Engine oil too thick

- Low tire pressure

M3 Evo ~320 at fly, mine made 255rwhp.

You say 180rwkw ~ 241rwhp? When stock? Lies. Stock ones would make about 180rwhp...

In any case, V8 M3 is 414hp @ fly ~ 350rwhp.. no chance especially in a straight line... (Source)

What makes 180rwhp? My stock turbo skyline was making 193rwkw on 12psi and is a very quick car. How much does the M3 weigh? It is a fairly big car. Both my skylines produced more torque also. In that graph that V8 is making 259ft pounds of torque. My old skyline made close to 320ft pounds and the current one is pushing more than 500ft pounds. I'm sitting on about 700nm and that is out of a small 2.5L 1.3 ton car. And I don't just peak that torque

Few possibilities.

- Possibly his variable length intake actuature (it actually looks like an actuator for a turbo) could be faulty. it's located on the middle section of the "Y" pipe - vacum leak will cause the actuator to stop working or work intermittently, causing sluggish low end performance.

- Any vacum leak

- Dirty air filter.

- Dirty AFM

- 02 sensor could be getting too old

- Poor quality fuel

- Timing out

- Auto trans slippage

- His car may have done higher KM's

- Engine oil too thick

- Low tire pressure

hmmm. could just be a lemon

What makes 180rwhp? My stock turbo skyline was making 193rwkw on 12psi and is a very quick car. How much does the M3 weigh? It is a fairly big car. Both my skylines produced more torque also. In that graph that V8 is making 259ft pounds of torque. My old skyline made close to 320ft pounds and the current one is pushing more than 500ft pounds. I'm sitting on about 700nm and that is out of a small 2.5L 1.3 ton car. And I don't just peak that torque

Yeah you aren't making 700nm of torque.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...