Jump to content
SAU Community

Recommended Posts

Guys

I've just put a deposit on a 2000 model DAYZ RS4S (ie manual) in black. Currently its only got a catback, but i have a bunch of stuff to go on it.

I'm moving from an S1 C34 auto (RWD), and I feel this is a decent minor upgrade

Seems I cant find heaps of info on this model though. I'm wondering about stuff like clutch upgrade, and whether these can be nistuned like all other Neo's. How much power can the stock clutch and gearbox take? (I have parts floating around for about 270-280rwkw). Do they have LSD in the rear?

How many of you guys have RS4S'? What do you think of them?

Thanks in advance for your replies

Link to comment
https://www.sau.com.au/forums/topic/379150-educate-me-on-c34-rs4s/
Share on other sites

SEARCH IS YOUR FRIEND. But im nice so here ya go.

Clutch upgrade is the same as skyline. Recommended first mod the stock clutch has zero clamp force and won't even hold the stock power.

R34 engine = type 4 nistune.

People are making 300+ with stock gearbox

Front and rear LSD.

There is lots of rs4s owners on here.

hmmm, my clutch is holding out 220kw, no slipping, unless i dump the clutch at 5.5krpm and above in 4wd mode, then i get a slight slip.

clutch is 30k km old.

but they are def a fun car to own. just make sure you do some decent stability mods, they handle pretty bad.

Ok so i just took delivery of it. Drives great except that it crunches into 4th gear, so i'll need to get that looked at

Regarding suspension, I've already got the following ready to install

Tein coilovers

Cusco Castor Rods

Whiteline swaybars

Adjustable front upper arms

Cusco Adjustable rear upper arms.

Alloy subframe lock kit

Is it worth getting a hicas lock kit? I'm not a big fan of letting the electronics decide what direction I should be going so i'm tempted to do that

This thing is a bit slow compared to our other stageas. I'm sure the 3076 i'll be installing on it shortly should resolve that issue though :)

Are Dayz S2 RS4S in black a common thing? I dont recall having seen one before

Also WHY NO CUPHOLDERS!??!! There must be a reason they decided to install a blanking plate on the RS4S' rather than the cup holders under the stereo.

There are two small cup holder recesses in the centre console.

I would be interested to see how you how you with a GT3076. The manual stagea is a big lump to get off the line and I think it might be a bit docile down low but will haul once a few revs are onboard.

The stock clutch will hold reasonable power. Mine was FUBAR'ed on arriving from Japan and wouldn't hold decent power on the dyno. I went through two cushioned button clutches. The first had issues from the date of install and was replaced soon after. The 2nd one was a pain in the arse to use on inclined roads in traffic due to the weight of the stagea, it bogs down so easily with a button clutch or you need to launch it.

The current NPC clutch is so much better for the street. NPC higher clamp organic clutch is a gem.

The reason for no cup holders is you wouldn't be able to pull them out when your in 1st, 3rd or 5th

Pfft, they're fine where they are. Mine's a converted car (s1 with R32 GT-R box), and I can still use the cup holders under the stereo while driving.

Im curious as to why you would want cup holders anyway, that's what legs are for. After driving classic toyotas for the last 8 years I haven't even considered cup holders to actually hold a drink of any kind, my cup holders in the stagea hold the bolts that don't fit anywhere/fall off and my garage door button.

Not a bad example of a stagea.

Ok i'm going to stick some cupholders back in. Worst case is I'll bump the cups when changing gears.

LOL at using legs to hold the cups. You obviously aren't driving hard enough! :)

Hopefully my new stagea will have some significant changes over the next few weeks

hey mate if you got all this gear to go in your rs4s i hope the coilovers etc didnt come out of an rs4v cos they wont fit.

coilovers is the best thing i did to mine for better 'drivability' aka doesnt feel like your cornering in the titanic

rear is an active LSD, my rear wheels skip like a locked diff when turning close to full-lock

i actually like hicas and dont understand why people hate it so much

hey mate if you got all this gear to go in your rs4s i hope the coilovers etc didnt come out of an rs4v cos they wont fit.

coilovers is the best thing i did to mine for better 'drivability' aka doesnt feel like your cornering in the titanic

rear is an active LSD, my rear wheels skip like a locked diff when turning close to full-lock

i actually like hicas and dont understand why people hate it so much

because old hicas tends to play up and get really buggy/worn/does random stuff

new hicas is good unless your on a track and know the exact conditions etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...