Jump to content
SAU Community

Recommended Posts

Guys

I've just put a deposit on a 2000 model DAYZ RS4S (ie manual) in black. Currently its only got a catback, but i have a bunch of stuff to go on it.

I'm moving from an S1 C34 auto (RWD), and I feel this is a decent minor upgrade

Seems I cant find heaps of info on this model though. I'm wondering about stuff like clutch upgrade, and whether these can be nistuned like all other Neo's. How much power can the stock clutch and gearbox take? (I have parts floating around for about 270-280rwkw). Do they have LSD in the rear?

How many of you guys have RS4S'? What do you think of them?

Thanks in advance for your replies

Link to comment
https://www.sau.com.au/forums/topic/379150-educate-me-on-c34-rs4s/
Share on other sites

SEARCH IS YOUR FRIEND. But im nice so here ya go.

Clutch upgrade is the same as skyline. Recommended first mod the stock clutch has zero clamp force and won't even hold the stock power.

R34 engine = type 4 nistune.

People are making 300+ with stock gearbox

Front and rear LSD.

There is lots of rs4s owners on here.

hmmm, my clutch is holding out 220kw, no slipping, unless i dump the clutch at 5.5krpm and above in 4wd mode, then i get a slight slip.

clutch is 30k km old.

but they are def a fun car to own. just make sure you do some decent stability mods, they handle pretty bad.

Ok so i just took delivery of it. Drives great except that it crunches into 4th gear, so i'll need to get that looked at

Regarding suspension, I've already got the following ready to install

Tein coilovers

Cusco Castor Rods

Whiteline swaybars

Adjustable front upper arms

Cusco Adjustable rear upper arms.

Alloy subframe lock kit

Is it worth getting a hicas lock kit? I'm not a big fan of letting the electronics decide what direction I should be going so i'm tempted to do that

This thing is a bit slow compared to our other stageas. I'm sure the 3076 i'll be installing on it shortly should resolve that issue though :)

Are Dayz S2 RS4S in black a common thing? I dont recall having seen one before

Also WHY NO CUPHOLDERS!??!! There must be a reason they decided to install a blanking plate on the RS4S' rather than the cup holders under the stereo.

There are two small cup holder recesses in the centre console.

I would be interested to see how you how you with a GT3076. The manual stagea is a big lump to get off the line and I think it might be a bit docile down low but will haul once a few revs are onboard.

The stock clutch will hold reasonable power. Mine was FUBAR'ed on arriving from Japan and wouldn't hold decent power on the dyno. I went through two cushioned button clutches. The first had issues from the date of install and was replaced soon after. The 2nd one was a pain in the arse to use on inclined roads in traffic due to the weight of the stagea, it bogs down so easily with a button clutch or you need to launch it.

The current NPC clutch is so much better for the street. NPC higher clamp organic clutch is a gem.

The reason for no cup holders is you wouldn't be able to pull them out when your in 1st, 3rd or 5th

Pfft, they're fine where they are. Mine's a converted car (s1 with R32 GT-R box), and I can still use the cup holders under the stereo while driving.

Im curious as to why you would want cup holders anyway, that's what legs are for. After driving classic toyotas for the last 8 years I haven't even considered cup holders to actually hold a drink of any kind, my cup holders in the stagea hold the bolts that don't fit anywhere/fall off and my garage door button.

Not a bad example of a stagea.

Ok i'm going to stick some cupholders back in. Worst case is I'll bump the cups when changing gears.

LOL at using legs to hold the cups. You obviously aren't driving hard enough! :)

Hopefully my new stagea will have some significant changes over the next few weeks

hey mate if you got all this gear to go in your rs4s i hope the coilovers etc didnt come out of an rs4v cos they wont fit.

coilovers is the best thing i did to mine for better 'drivability' aka doesnt feel like your cornering in the titanic

rear is an active LSD, my rear wheels skip like a locked diff when turning close to full-lock

i actually like hicas and dont understand why people hate it so much

hey mate if you got all this gear to go in your rs4s i hope the coilovers etc didnt come out of an rs4v cos they wont fit.

coilovers is the best thing i did to mine for better 'drivability' aka doesnt feel like your cornering in the titanic

rear is an active LSD, my rear wheels skip like a locked diff when turning close to full-lock

i actually like hicas and dont understand why people hate it so much

because old hicas tends to play up and get really buggy/worn/does random stuff

new hicas is good unless your on a track and know the exact conditions etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...