Jump to content
SAU Community

Recommended Posts

Guys

I've just put a deposit on a 2000 model DAYZ RS4S (ie manual) in black. Currently its only got a catback, but i have a bunch of stuff to go on it.

I'm moving from an S1 C34 auto (RWD), and I feel this is a decent minor upgrade

Seems I cant find heaps of info on this model though. I'm wondering about stuff like clutch upgrade, and whether these can be nistuned like all other Neo's. How much power can the stock clutch and gearbox take? (I have parts floating around for about 270-280rwkw). Do they have LSD in the rear?

How many of you guys have RS4S'? What do you think of them?

Thanks in advance for your replies

Link to comment
https://www.sau.com.au/forums/topic/379150-educate-me-on-c34-rs4s/
Share on other sites

SEARCH IS YOUR FRIEND. But im nice so here ya go.

Clutch upgrade is the same as skyline. Recommended first mod the stock clutch has zero clamp force and won't even hold the stock power.

R34 engine = type 4 nistune.

People are making 300+ with stock gearbox

Front and rear LSD.

There is lots of rs4s owners on here.

hmmm, my clutch is holding out 220kw, no slipping, unless i dump the clutch at 5.5krpm and above in 4wd mode, then i get a slight slip.

clutch is 30k km old.

but they are def a fun car to own. just make sure you do some decent stability mods, they handle pretty bad.

Ok so i just took delivery of it. Drives great except that it crunches into 4th gear, so i'll need to get that looked at

Regarding suspension, I've already got the following ready to install

Tein coilovers

Cusco Castor Rods

Whiteline swaybars

Adjustable front upper arms

Cusco Adjustable rear upper arms.

Alloy subframe lock kit

Is it worth getting a hicas lock kit? I'm not a big fan of letting the electronics decide what direction I should be going so i'm tempted to do that

This thing is a bit slow compared to our other stageas. I'm sure the 3076 i'll be installing on it shortly should resolve that issue though :)

Are Dayz S2 RS4S in black a common thing? I dont recall having seen one before

Also WHY NO CUPHOLDERS!??!! There must be a reason they decided to install a blanking plate on the RS4S' rather than the cup holders under the stereo.

There are two small cup holder recesses in the centre console.

I would be interested to see how you how you with a GT3076. The manual stagea is a big lump to get off the line and I think it might be a bit docile down low but will haul once a few revs are onboard.

The stock clutch will hold reasonable power. Mine was FUBAR'ed on arriving from Japan and wouldn't hold decent power on the dyno. I went through two cushioned button clutches. The first had issues from the date of install and was replaced soon after. The 2nd one was a pain in the arse to use on inclined roads in traffic due to the weight of the stagea, it bogs down so easily with a button clutch or you need to launch it.

The current NPC clutch is so much better for the street. NPC higher clamp organic clutch is a gem.

The reason for no cup holders is you wouldn't be able to pull them out when your in 1st, 3rd or 5th

Pfft, they're fine where they are. Mine's a converted car (s1 with R32 GT-R box), and I can still use the cup holders under the stereo while driving.

Im curious as to why you would want cup holders anyway, that's what legs are for. After driving classic toyotas for the last 8 years I haven't even considered cup holders to actually hold a drink of any kind, my cup holders in the stagea hold the bolts that don't fit anywhere/fall off and my garage door button.

Not a bad example of a stagea.

Ok i'm going to stick some cupholders back in. Worst case is I'll bump the cups when changing gears.

LOL at using legs to hold the cups. You obviously aren't driving hard enough! :)

Hopefully my new stagea will have some significant changes over the next few weeks

hey mate if you got all this gear to go in your rs4s i hope the coilovers etc didnt come out of an rs4v cos they wont fit.

coilovers is the best thing i did to mine for better 'drivability' aka doesnt feel like your cornering in the titanic

rear is an active LSD, my rear wheels skip like a locked diff when turning close to full-lock

i actually like hicas and dont understand why people hate it so much

hey mate if you got all this gear to go in your rs4s i hope the coilovers etc didnt come out of an rs4v cos they wont fit.

coilovers is the best thing i did to mine for better 'drivability' aka doesnt feel like your cornering in the titanic

rear is an active LSD, my rear wheels skip like a locked diff when turning close to full-lock

i actually like hicas and dont understand why people hate it so much

because old hicas tends to play up and get really buggy/worn/does random stuff

new hicas is good unless your on a track and know the exact conditions etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
    • Yes it is ATF. I quote @Duncan "it takes a good synthentic auto trans fluid like Castrol Transmax Z" It's not a diff. It's a transfer case. Totally different thing. Yes, fluid will come out the sender hole. No you do not really need to drain it. Just pull the old, quickly poke the new, clean up and top up. But realistically, you should probably take the opportunity to change it anyway.
×
×
  • Create New...