Jump to content
SAU Community

Recommended Posts

Yep, hasn't been up on carsales for long but not really getting any hits on any of the sites its on at the moment.

Hmm... Considering selling the GTR soon-ish but not sure if I'd have the patience to wait for long time.

Hmm... Considering selling the GTR soon-ish but not sure if I'd have the patience to wait for long time.

If I had the choice I wouldn't sell at this time because I know I'll probably only sell it for 10 if I'm lucky, only selling cos I need that money for other things but we'll see how it goes I suppose.

If I had the choice I wouldn't sell at this time because I know I'll probably only sell it for 10 if I'm lucky, only selling cos I need that money for other things but we'll see how it goes I suppose.

I suppose I'll have to wait until I get an apprenticeship or not and go from there.

does anyone else find it impossible to go through twisty roads as passenger and not get badly sick? sunday night was throwing up from 10pm-5am to the point were just blood was coming out...

head's been spinning for the last 3 days

i should've just come to this nats thing

lean into the turns. you do this while driving, which is why drivers never get carsick. passengers tend to passively get leant outwards. the constant sideways G forces confuse your inner ear. leaning into the turns counteracts this. never get carsick again

lol what

Are you positively annoyed friend?

lean into the turns. you do this while driving, which is why drivers never get carsick. passengers tend to passively get leant outwards. the constant sideways G forces confuse your inner ear. leaning into the turns counteracts this. never get carsick again

did that for a bit then got over it. soon as i start moving my head, look down etc = f**ked

That thing competed on track day. Not bad.

is it an m3? e36 > e46 for track

went through 125 pics/125 gay comments left by a Justin Gould wtf...

Lol his just a clown

Also in regards to Borci selling the Gts-t. Price it to sell now, otherwise you'll be forever lowering the price.

how much grant

I took 20k flat for mine, hard market out there.. Unless you got a track spec 33 GTR then IMO 25k-30k (mine was advertised for 22)

You should get one!

I must admit though tempted to buy a s14 or r32 or something just for track, cheaper and still a shit load of fun for a dedicated track car :D

Lol his just a clown

Also in regards to Borci selling the Gts-t. Price it to sell now, otherwise you'll be forever lowering the price.

Couldn't agree more, always gonna be dropped especially with a skyline may as well start it off low rather then try selling it for 6 months, pay insurance and rego in mean time + fuel etc = big fail.

Couldn't agree more, always gonna be dropped especially with a skyline may as well start it off low rather then try selling it for 6 months, pay insurance and rego in mean time + fuel etc = big fail.

Yup...

If I had the choice I wouldn't sell at this time because I know I'll probably only sell it for 10 if I'm lucky, only selling cos I need that money for other things but we'll see how it goes I suppose.

great price for 12/10k. Was searching for a r33 gtst for my friend. Couldnt find anything clean and around that price. He's since purchased another car now so cant help. :(

Yeah definitely, I'll probably drop it to 11 in the next week and see if I can get some bites. It's just a shame there isn't a WTB site you can go on where there's 30 people who want a skyline for 9k and u can just drop in and offer them all and see who takes, rather than wait months for that right person to find it on the net.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
    • OK, now we are ready to get started. You need to remove the air boxes on each side for clearance. The cover is straightforward, undo the clips on the top and lift the front cover out of the rest of the housing. If it is tight you can remove the air filters first. The rear section of the airbox is trickier. On each side you need to remove the Air flow meter wiring which is held to the airbox with a clip; you need to get behind the clip on 2 sides if you want to remove it without breaking it - unclip the harder side and pull on the clip with medium force, then unclip the easier side and it should pop out The airbox is held onto the intake hose with a spring clamp; you need to get a flat bladed screwdriver behind the spring on both sides and pop them outwards. When you have got them in the right unclipped place they will stay there and the airbox slips out pretty freely. Put a rag in the intake to prevent anything getting dropped in there, and also to prevent you seeing that the turbo seal is leaking oil (as they do). Then. The top of the radiator is held by a steel plate, it is secured by 2x10mm and 2x12mm headed bolts . Remove them and remove the plate Also grab the bushings that hold the radiator to the plate on each side so they are not lost!
    • Next, remove the upper and lower radiator hoses, both are held with a spring clamp. While you are under there, tackle the Auto Trans cooler lines.  Again both are held on with spring clamps, and as mentioned above you should cap them on the radiator side with an 8mm cap, and on the car side loop them with a length of 8mm pipe - this will stop you losing a dangerous amount of AT fluid during the rest of the job If you've been meaning to add a sender for AT trans temp, this is a great time to do it; put a sender fitting into the passenger side line as that is the inlet to the cooler/radiator.
    • Next you need to remove the intake duct (as with pretty much every job on these cars), it is a series of clips you gently remove with a flat bladed screwdriver. They do get brittle with time and can break, and I have not found a decent quality aftermarket one that fits (they are all too soft or flimsy and don't last either) but the nissan ones are a couple of bucks each (ouch).  Once the clips are off (either 8 or 10, I didn't check) you lift the intake duct out and will see the reservoirs Undo the line into the radiator side cap (some bent needle nosed piers are awesome for spring clamps) and then remove the 4x 10m nuts that hold both in place.  I didn't get these pics, but remove the line under the radiator reservoir (spring clamp again) then remove that reservoir. Then you can get at the intake reservoir, same thing, spring clamp underneath then remove it. BTW This is a great time to put in a larger (+70%) combined reservoir that AMS makes..... https://www.amsperformance.com/product/q50-q60-red-alpha-coolant-expansion-tank/ They also make an Infiniti branded and part# version if that is your thing
×
×
  • Create New...