Jump to content
SAU Community

Recommended Posts

f**k that, that's just straight up greed.

If I ever earned/won that kind of cash, I'd never work again. (winning a million isn't enough to pull up stumps these days, sure you can set yourself up but I wouldn't rely on it 100%) but 20+mil and you're set, unless you're a moron.

I'd have businesses, clubs/restaurants etc but I wouldn't personally work in them.

I'd also spend the majority of my money on high end cars that I can only dream of owning...

But this flamin mongrel makes $44m, probably for a few years before the article, yet still works and seeks a pay rise. Makes me sick.

Some just like to do more than just being a sparky mayne..

Just sayn

Any body else using a HHHD button clutch? Lol will the harshness go away after a while or not

Im using a 2x Heavy duty cushion button clutch. Its soft as. Get the cushion in it aswell or you will start breaking pedal boxes.

Having a clutch THAT heavy is not necessary at all

Im using a 2x Heavy duty cushion button clutch. Its soft as. Get the cushion in it aswell or you will start breaking pedal boxes.

Having a clutch THAT heavy is not necessary at all

It's already installed. It's really good driving but starting it is either wheel spin or stall

Any body else using a HHHD button clutch? Lol will the harshness go away after a while or not

No, but on the plus side, if you get car jacked, you can just jog after the guy while he attempts to drive your car away lol

You will just get used to it i guess lol :P

rob sabaddin said it will be fine after a while

Aaron, kick clutch right after turn wheel = fun times.

lol dickhead

No, but on the plus side, if you get car jacked, you can just jog after the guy while he attempts to drive your car away lol

i cant even drive it properly.. let alone someone else

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...