Jump to content
SAU Community

Recommended Posts

Because 380 is HUGE power, not just big power ;)

Its also a massive % increase for just a tune

Lol have you been in a boss model yet? My manager has one and they absolutely hammer.. Didn't actually believe ford brought out such a powerful car from factory in AUS

380rwkw without mods? :mellow:

what do they weigh?

About 1800, maybe a bit less which is expected I guess for a big car.. got about 300kgs on my old GTR :O.. still do a tune and your in 11s.

Other vids online to back this up as well / all info on forums etc

Standard boost just drops off so much

They go alright:

This ones got a catback and a tune, nothing else

I met a bloke the other day selling a Callaway Corvette..90k if anyones interested..still left hook though

11 sec in stock trim and 200mph+ top speed

much the same as this one

http://www.youtube.com/watch?v=x8HyT4d7Kzc

Enjoy 380rwkw on pos stock tyres/suspension/brakes

When you bringing it to a meet Leigh?

Obviously upgrade the 245s, and will be doing brembos / suspension down the track as well

Whenever the next meet is !

Saving for a few months, what are they made of gold? Get a Blitz CS and stick with the standard plenum...

Lol studying full time+part time wages=not a lot of cashola.

Yeah I've read that that upgrading the plenum on a standard turbo isn't really worth it as I won't see any real gains but by doing it now with a FMIC it means I won't have to do it down the track and it'll support future mods better (ie. upgraded turbo). What I liked about the plazmaman plenum was that it retained the standard factory runners. Essentially I'm not after a car that's a dyno king rather a quick car with some good midrange torque.

interesting leigh!

the car was running 118's @ full weight, anyone know enough about boring/pointless/homo drag racing to derive a rwkw figure from that?

FWIW i ran consistent 119's with 325rwkw @ 1350kg

Going by that post, you do not need a plenum upgrade and are only wasting your money if you get one. And it doesn't sound like you have a big disposable income so why bother?

If you're not after a dyne king, rather a fast street car, turbos like a gt-rs are where you'd be looking, and you don't need an aftermarket plenum for that.

If you ever decide to get a turbo that does warrant a plenum upgrade, thats when you buy one...

interesting leigh!

the car was running 118's @ full weight, anyone know enough about boring/pointless/homo drag racing to derive a rwkw figure from that?

FWIW i ran consistent 119's with 325rwkw @ 1350kg

What about that fluke 190mph pass Ham? No need to be modest

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Also seen this as an option 
    • I get you, we’ll see I’m aiming for 200ish kw now and hopefully 300rwkw down the line after some upgrades maybe like headstuds, E85 flex fuel etc  so trying to make it final for that now, I can get a GTT airbox for $280 so it’s not too bad but not sure if there’s better ways to spend that money. I seen online they say pod filter which isn’t enclosed isn’t good especially for a plus T.      hard to say what to do
    • Meh. How much power can you make from a +T anyway? I wouldn't have though it would be enough to challenge the airbox. It's not as if it's tiny compared with the turbo one. As to putting a pod in a stock airbox .... it's not the filter element that would be restrictive. It would be the air inlet to the box that would be the narrow point, which you could open up regardless of what element was inside. On my R32 I opened up the sort of triangular opening in the bottom front corner of the box, deformed (heated, moulded) some 4" stormwater pipe to fit to that opening and punched a 4" hole down through the inner guard to the spot where the stock intercooler used to be. This was purely in the search for a cold intake, but you could do something similar if you need to open up the inlet side of it. The AFM tube size is the same for both NA and turbo, so the outlet from the airbox is same same anyway. If you're going to do the right thing, then an aftermarket ECU won't care about the AFM (ie, you can get rid of it). But even if it was still there, people pull >300rwkW through them all day, and I suspect you won't be going there.
    • R34 RB25de Neo by the way ^ 
    • Doing a +T on my car and I’ve read the precious forums lots of mixed reviews from sometime back.  checking if anyone has any ideas for airbox or enclosed pod filter or solutions?  I was thinking stock GTT box but some say it’s restrictive? I seen some people try fit in a pod in the box anyone done that recently?  not any good enclosed options ? Thanks 
×
×
  • Create New...