Jump to content
SAU Community

Recommended Posts

Oh ok so what happens if the face is flipped again? Is there anothe valve on the other side?

the face isn't flipped as such

originally LMs look like this

post-59633-0-85522100-1325554793_thumb.jpg

look closely at the picture of how the face is mounted and then look again at the picture i posted previously

originally the face is bolted on top of the lip

when reverse mounted the face sits behind the lip

Knox TMU are playing funny buggers :)

The usual dark green VE commodore.. but with an added twist... banged up toyota echo stirring up people at the traffic lights, then popping a u turn and following the cop car back for another lap when noone bites :)

lol Toyota Echo, you can beat it without even gunning it, there is just no effort there, they need a XR6 Turbo or something

the face isn't flipped as such

originally LMs look like this

post-59633-0-85522100-1325554793_thumb.jpg

look closely at the picture of how the face is mounted and then look again at the picture i posted previously

originally the face is bolted on top of the lip

when reverse mounted the face sits behind the lip

oh i get it .. can you actually reverse the face though??

yeah cleared the defect.. chick who checked it was haaawt

So a drive a Portsea today and my oil temp is this :/

Ambient temp outside was about 27

Just did an oil change of Motul 8100 5w 40 Fully synthetic

Should I be worried? What are the consequences of a really hot oil temp?

post-26457-0-82034200-1325580691_thumb.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...