Jump to content
SAU Community

Recommended Posts

From what I know, you can't store more than one map in the ECU, I think Hamish carry laptop containing both 98 oct and E85 tune and transfering via PFC datalogit.

I'm sure Hamish will correct me if I'm wrong.

data logit wont work on a mac i dont think... fek..

go kill yourself kadir.

Can't switch tunes on PFC, need Data Logit or FC Hako - Paul will tell you more about this, or Google it. Be surprised if it doesn't work with Mac. Or just shell out $200 for a small/cheap laptop...

Yes. Just beat my PB at the Island from April by .5 of a second after being set back by a traumatic crash in October. In an exhausted state as well!

Now down to 1:46.3 oooooooh rah! Only ten more seconds to go :D

Congrats, maybe it was me and the supplements :P

data logit wont work on a mac i dont think... fek..

go kill yourself kadir.

Yeah, I think one of these macbooks with intel core can run mac/windows xp.

Can't switch tunes on PFC, need Data Logit or FC Hako - Paul will tell you more about this, or Google it. Be surprised if it doesn't work with Mac. Or just shell out $200 for a small/cheap laptop...

Might be a option.

BTW, is this at Dromana on the pics?

yeah you need winblows to run datalogit

and fc hako is a cable only solution, so you use the fc hako cable with datalogit or apexi's software

again all windows based

you could buy a crap old dell lattitude laptop off ebay for 200 with a true serial port and run win98

many people do that for car based serial connection thingies (i sold my datalogit kit with a dell win98 laptop)

yeah you need winblows to run datalogit

and fc hako is a cable only solution, so you use the fc hako cable with datalogit or apexi's software

again all windows based

you could buy a crap old dell lattitude laptop off ebay for 200 with a true serial port and run win98

many people do that for car based serial connection thingies (i sold my datalogit kit with a dell win98 laptop)

cool thanks..

i can install windows as a secondary system on the mac..

will i need the datalogt module to use it? or is it just a pfc to usb cable??

yep you can try running it inside an emulated windows

as long as it can speak to a serial port it should be fine

datalogit expects a serial port, and doesnt understand usb

so as long as whatever you use, appears as COM serial port, it will work (or should)

datalogit is software and a cable

fc hako is a cable

datalogit is software and a cable

depending on what software you try to use, will determine what cable you use

or vice versa

if you have an apexi legit cable, you must use their software

if you have datalogit cable, you can use datalogit

if you have an fc hako cable you can use any software

grant

as long as it (the pc or laptop or mac or windows or linux or solaris or beos) can speak to a serial port it should be fine

datalogit (and the others) expect a serial port, and don't understand usb

so as long as whatever you use, appears as COM serial port, it will work (or should)

datalogit ships with a USB cable and so does FC hako

but all that this cable does is provide a USB serial port

datalogit and apexi fc pro etc don't know native USB speak

they just assume its a COM serial port and hope for the best

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
×
×
  • Create New...