Jump to content
SAU Community

Recommended Posts

What speed is say 4,000 rpm? Do you have an old graph of the stock turbo?

Probably 120kph'ish dunno why he does it in speed and not rpm.. :s

I have one but it's from dr drift. Who basically fkd the tune.

The last one cihan did is on his website I'll get it later

You said you were limited by injectors yeah? What is the estimated figure if no restriction on 98 octane?

No idea. Planning on running it at 25psi later down the track. The turbo goes out of efficiency only after that so it should crack the 300 on pump no worries. People are doing that with a .63 with a .82 it can only be less restricted

The drop in power up top is a spark issue. Looks like I'll be needing splitfires for anymore power, and cihan(tuner) reckons there's a bit more in it for 98, plus quite abit for e85

Not bad, midrange is a bit lacking but that's to be expected with 2L and .82 rear. Ethanol will help that a bit

Not bad, midrange is a bit lacking but that's to be expected with 2L and .82 rear. Ethanol will help that a bit

Yeh so it shows. But it's picks up revs too quickly to really notice while driving. Ethanol should make of all the better!

Pancakes + butter + maple syrup + ice cream + chocolate fudge + wafers + almonds. Feeling kind of fat...PP strikes again.

Unrelated, did not know there were 9000 bodies buried under Queen Vic market.

The_More_You_Know.jpg

Pancakes + butter + maple syrup + ice cream + chocolate fudge + wafers + almonds. Feeling kind of fat...PP strikes again.

Unrelated, did not know there were 9000 bodies buried under Queen Vic market.

The_More_You_Know.jpg

sandra sully with the late news there buddy.

thats why the support beams arent secured in the ground, but instead on massive cement blocks.

the construction workers were sick of diggin up dead peepz skull n shiiiet... ANNNND why they do haunted night tours :yes:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...